Intense confusion about thread stripping/what i did to my tank?

Discussion in 'New Members Forum' started by bearman94, Feb 5, 2014.

Thread Status:
Not open for further replies.
  1. bearman94

    bearman94 Moved On

    So i have an iTaste MVP2
    I was using the innokin iclear 30 B and pulled it out of my pocket and it just flopped off.
    I tried to screw the tank back in but it doesnt work. if i turn it as if i were to tighten it, it just spins in circles and feels as if the thread of the Iclear has magically shrunk . and im so puzzled by how it doesnt seem to fit in at all. nothing broke off, the thread is still the same length but it simply will not screw or catch the thread no matter how hard i try.... It fits on other EGO batteries, and other tanks and attys fit on my MVP2 so i know thats not stripped.. but
    the tank's threads look the same as they did before this happened..
    any information please D:
    thank you !
  2. bacc.vap

    bacc.vap Vaping Master Verified Member ECF Veteran

    Double check the iTaste's 510 threads, it sounds as if the iclears threads are stuck in the itaste. Take another 510 carto or something and see if that screws in, if not it's almost certain your iclears outer threading is in there.
  3. Art02

    Art02 Senior Member ECF Veteran

    Yes, of course. Brilliant. But it took you 27 minutes to reply. We let this guy down. He probably gave up.
  4. bacc.vap

    bacc.vap Vaping Master Verified Member ECF Veteran

    I'm sure he did'nt give up, but after looking at my answer i'm not so sure it's correct, since he said he was able to screw other attys into his itaste. I had someone with this scenario send me a mod once to check out, and that was the problem, the carto threads were stuck in it. I did'nt see the carto, but it must have looked normal to her. You'd think if the threads were missing on a carto it would be obvious, but that's not necessarily so.
    Some pics might help if he has'nt gotten it figured out when he comes back.
  5. mr.motivapr

    mr.motivapr Full Member

    27 minutes to reply isnt bad you know!
    Some companies place you on hold for longer than that :)
  6. bacc.vap

    bacc.vap Vaping Master Verified Member ECF Veteran

    ...and pay more.
  7. dice57

    dice57 PV Exporer/Juice Saucier Verified Member ECF Veteran

    Supporting member
    We get paid? lol. I'm thinking to much :toast:
  8. Art02

    Art02 Senior Member ECF Veteran

    We don't have music.
  9. bearman

    bearman Full Member

    I checked, but it doesnt seem like anythings is stuck . ill post a picture
  10. monday

    monday Full Member Verified Member

    Not sarcasm, but are you sure you are tightening it the right way? :)
  11. bearman

    bearman Full Member

  12. TheReign

    TheReign Ultra Member ECF Veteran

    I don't see how 27 minutes is too long to reply.. You sure didn't post anything Lol, Only reason I haven't is because I was trumped about this myself. Hope you can find a solution buddy. tried google?
  13. bearman

    bearman Full Member

    1559394_10203157652244596_562809510_o.jpg there we go
  14. bearman

    bearman Full Member

    googled it for a while. Pretty good with computers/ the internet so.
    i tried lmao
  15. HighEnergyProton

    HighEnergyProton Senior Member ECF Veteran

    This is not a bad thing
  16. bearman

    bearman Full Member

    still no help?
  17. GKM96

    GKM96 New Member

    Having the same issue , the batt just spins as if there is no thread at all - though I can see the threads and no visual damage whatsoever
  18. cope

    cope Super Member ECF Veteran

    well if other threaded things tighten down to the mvp its simple GET ANOTHER TANK .
  19. Bunnykiller

    Bunnykiller ECF Guru Verified Member ECF Veteran

    looks like the threads on both the MVP and the atty have gone minimal ( both items have worn out but not enuf if one or the other is tried with something with good threads)

    have you tried another tank on the MVP? did it fit/work?
  20. Spazmelda

    Spazmelda Vaping Master Verified Member ECF Veteran

    Supporting member
    This baffles me, and I'm very glad I was snug asleep when you posted the question, or it would have kept me awake. Lol.

    I was thinking along the same lines as bac, but if other things are screwing down on the MVP, then the outer threads can't be stuck in there, and it appears that the outer threads are still on the iclear in the pic. I guess it could be that both sets of threads have just worn down enough to not catch, and I guess that would fit with the scenario of pulling it out of your pocket and having them pull apart.

    Does iclear sell separate bases for their tanks?
Thread Status:
Not open for further replies.

Share This Page