Introducing the AGA - Hydra and the AGA - Tiamat Rebuildable Atomizer Tanks

Discussion in 'DiscountVapers' started by gormly, Oct 24, 2012.

  1. gormly

    gormly Forum Supplier ECF Veteran

    Introducing the AGA Hydra (AGA) and the AGA Tiamat (AGA-T) Rebuildable Atomizers

    This thread will be specifically for the AGA Series going forward.

    The AGA Hydra - available now has already been released but here is a reference picture.


    [​IMG]
    [​IMG]

    20.4mm Overall Diameter
    52mm Overall Length assembled (without drip tip)
    1.0mm Airhole


    Comes with
    1 AGA Unit only, no drip tip.
    1 Extra screw to turn this into a Mesh based atomizer. if desired.


    ****************************


    NEW: AGA Tiamat - available now


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    comes with wick and coil and extra parts!!
    Note the Tiamat is partially preassembled (but not pre-wicked and coiled) , what you see below is the extra parts

    [​IMG]

    size comparison

    [​IMG]

    Comes preassembed (except for wick and coil) and has a parts baggie!

    New! an affordable STAINLESS rebuildable atomizer with a CLEAR tank system holding up to 3.2+ml
    NOTE: This is partially pre-assembled


    Please be aware, I expect a lot of sales of this item and shipping might be delayed by a day, please understand we'll go as fast as possible.

    Most rebuildable atomizers are not for beginners but if you choose to stick with the standard wick and coil setup you can simply purchase premade wick and coil.
    Made with Stainless steel. Yes.. stainless steel




    Can be disassembled and put back together in minutes, very easy to clean, use and rebuild with some experience or practice.


    20.4mm Overall Diameter (Tank)
    22.5mm Overall Diameter (Outer shell)
    60mm Overall Length assembled (without drip tip)
    1.0mm Airhole
    note: this airhole is the same size as the original grifin airhole a few people commented this should be bigger, I think it's OK, but I am asking the manufacurer to make it bigger and supply replacement caps with bigger air holes, if I can get them they WILL be available here as soon as I can get them in. Please do not email asking for them, I will get them as soon as I can :)




    Comes with
    1 Tiamat Unit, no drip tip. partially assembled, the wick and coil are not premade.
    1. Parts Kit:
    (1) Wick (1) Coil (1) but probably enough for a few wicks
    Extra Orings (3) Extra seals (2) Extra Screw (1) Extra Washer


    This CAN be used with Mesh if you desire.
     
  2. Dieseler

    Dieseler ECF Guru Verified Member ECF Veteran

    Eric does the cap airhole line up with that open hole in your picture once screwed down fully ?
     
  3. gormly

    gormly Forum Supplier ECF Veteran

    The air hole on this one does not pose a problem in my tests, I was able to line it up properly with a slight twist which did not seem to make any difference in airflow or stability. But to answer your question more directly, very tightly attached, no. That said, there are multiple ways to configure this so the hole will line up if you turn it into a mesh machine I think.
     
  4. Jourelem

    Jourelem Super Member Verified Member ECF Veteran

    You're a step ahead of the rest, I love it man! Just ordered a hydra two days ago so I hope there's more left on Monday for me.
     
  5. Dieseler

    Dieseler ECF Guru Verified Member ECF Veteran

    I would use that open hole for my mesh wick but the airhole has to line up preferably with cap screwed down firm i dont mean to sound picky , the rest of cap would stay sealed , some like to leave a screw out for better airflow but i always leave the cap sealed otherwise.
     
  6. gormly

    gormly Forum Supplier ECF Veteran

    It's your money be as picky as you want. :)

    But seriously, this is not going to be an issue, it is tight with the orings I do not see how this would leak and it certainly isn't loose even with a half turn of the top cap.
     
  7. jinxt

    jinxt Super Member Verified Member ECF Veteran

    BAH! I JUST ordered a Griffin this morning because I was thinking the Tiamat style was going to be another week or two. If I had known this was gonna hit today I would have waited a few hours and got the Griffin next week. I suspect the Tiamat will be sold out by the time I can put $36 back into my bank account. LOL! Oh well. Hopefully there's still some in stock Friday.
     
  8. gormly

    gormly Forum Supplier ECF Veteran

    sorry about that, not on purpose honest, I just got the tracking the other day, I did not notice it was sent the previous day, they sent me a screen shot with the tracking and must have sent it before and then sent me the screen of the previous day after it has been sent already and on it's way.

    I honestly did not think I would be getting it until Friday. It was a complete surprise to get it today.
     
  9. jinxt

    jinxt Super Member Verified Member ECF Veteran

    Lol. No worries. I'm still going to get one. I'm hoping to see how well they fare with SS wicks. I know it CAN be done, I want to see how well it works.

    Sent from my ADR6425LVW using Tapatalk 2
     
  10. Dragoncqb

    Dragoncqb Senior Member ECF Veteran

    Just placed my order about a minute ago 1 AGA Tiamat a drip tip and a 18g syringe. Now I am still waiting and it's not here yet, I am as patient as any other vapor on this site but I have my limits.
    Thanks for getting this for us Eric and at such a steal of a price.
     
  11. gormly

    gormly Forum Supplier ECF Veteran

    If I didn't know you were kidding....

    :)
     
  12. alpman

    alpman Full Member Verified Member

    Let's hope it performs as good as it looks. I just ordered one for myself to go on my SS Telescope.
     
  13. gormly

    gormly Forum Supplier ECF Veteran

    from the looks of the build quality here in my hand, performance will be up to the user, the way it should be, I am happy with this one, very happy.
     
  14. alpman

    alpman Full Member Verified Member

    Wow, that was quick! I didn't expect you guys to ship until tomorrow, and yet I just received a status update with a tracking number!! Thanks, can't wait to play...
     
  15. gormly

    gormly Forum Supplier ECF Veteran

    trying to get them out as fast as possible :)
    going to stop soon though .. you know.. to sleep :)
     
  16. alpman

    alpman Full Member Verified Member

    Sleep is overrated, didn't you know that? When are you going to get the replacement clear tanks in for the Griffin? I'm in need of one...
     
  17. gormly

    gormly Forum Supplier ECF Veteran

    shipping now :)
     
  18. alpman

    alpman Full Member Verified Member

    I checked the site when I placed my order. It said out of stock. Any chance I can get you to throw one in?
     
  19. alpman

    alpman Full Member Verified Member

    Just checked again. Still says unavail...
     
  20. alpman

    alpman Full Member Verified Member

    I'll PayPal you a buck if you can add it
     

Share This Page