Introducing - The PureSmoker LEGACY!

Discussion in 'Puresmoker' started by CaSHMeRe, Mar 27, 2012.

Thread Status:
Not open for further replies.
  1. CaSHMeRe

    CaSHMeRe Vaping Master ECF Veteran

    Well, the Legacy has finally been born! Thanks to all those that entered the Device Naming Thread! We really appreciate it!

    This is the Final Prototype Piece, and Production has now started. Still being a prototype, don't pay attention to any of the machining marks [​IMG] LOL

    FAQ:
    1. Versions Available in the USA [Still To Be Discussed with Lisa for EU release]:
    * Standard 18650 [AW IMR 18490 + KICK]
    * IMR 18650 WITH Kick
    * Standard 18500 [AW IMR 18350 + KICK]
    * Possibly 18350 [Stand Alone - Won't work with kick]

    2. User replaceable brass contact points (switch side & atomizer side)

    3. Types:
    Stainless Steel - Premium Type (For Sure) [This Will Be The Only Version Available Upon Release]
    Aluminum - More budget friendly & different colors available (Hoping to make this happen a bit further down the road)

    4. Integrated Tank at some point (still in the development phase)

    5. Beefier threads on top & bottom (Top adapter cap has been moved from female threads to male threads)

    6. Re-egineered 510 Adapter that works with all tanks we have tested.

    7. Adding more safety measures ...

    * Moving to a electrophoretic painted spring (non conductive)
    * Additional delrin top cap on spring (where by the spring itself - although non conductive - never touches anything but plastic)
    * More & a Sizable increase in venting holes (Most are hidden with a couple slots on the tube itself)
    * Brass screw head used in adapter is smaller than the OD of the center pin on the atomizer, therefore, the pin will never be able to short
    * Larger pressed delrin spacer - weight savings & more delrin (less prone to cracking the thicker/bigger it is)

    8. Lengthier button travel, but still 100% adjustable.


    9. Not just a boring straight tube -- She now has curves, making her easier to hold & more ergonomic!


    18650 LEGACY
    [​IMG]


    18500 LEGACY
    [​IMG]
     
  2. Brutus Buckeye

    Brutus Buckeye Vaping Master Verified Member ECF Veteran

    Congrats, looks very sharp!
     
  3. cw37013

    cw37013 Senior Member Verified Member ECF Veteran

    It sure does look sweet! Thanks for all you do for the vaping community!! :)
     
  4. empekay

    empekay Full Member

    Heck yeah Steve! :D
     
  5. Firefly13

    Firefly13 Unregistered Supplier ECF Veteran

    Nice mod, but I can't buy one because of the slots, they drive me crazy just lookin at the pics.
     
  6. drIpping&driving

    drIpping&driving Senior Member ECF Veteran

    I've been a Puresmoker loyalist since the beginning. The V1 was my first & when it comes down to it, the Prodigy V3 is the most reliable, lowest maintenance mod I own. When can I get one Steve?
     
  7. empekay

    empekay Full Member

    @FireFly, Steve said on the PS forums

    "I'll post the slotted switch version tomorrow/Wednesday, and see if you guys like that one better (slotted switch would eliminate venting slots on the tube)"

    @Dripping&Driving

    Steve on PS Forums: "Preorders will open up Tonight/Tomorrow, and units should start shipping a week from Friday!"
     
  8. Firefly13

    Firefly13 Unregistered Supplier ECF Veteran

    Now i'm interested :D
     
  9. drIpping&driving

    drIpping&driving Senior Member ECF Veteran

    How much will they be?
     
  10. empekay

    empekay Full Member

    Not sure, I am getting mine for free, but I would also like to know this though.
     
  11. Brutus Buckeye

    Brutus Buckeye Vaping Master Verified Member ECF Veteran

    That's the price I'm going for! LOL
     
  12. empekay

    empekay Full Member

    Free is always good, except for those pesky diseases.
     
  13. Brutus Buckeye

    Brutus Buckeye Vaping Master Verified Member ECF Veteran

    Stay out of the Mouse's Ear and that won't happen.
     
  14. empekay

    empekay Full Member

    Nah Mouse's Ear isn't too bad, but Fuzzy Holes in JC is much worse, you can catch syphilis opening the entrance door...
    Yes, there is a strip club in Johnson City, TN called Fuzzy Holes... Yes.. Fuzzy Holes... I'm not kidding you.. It's really called Fuzzy Holes..

    Anyways, to keep this relevant.. Awesome on the Legacy! Can't wait! etc etc
     
  15. CaSHMeRe

    CaSHMeRe Vaping Master ECF Veteran

    Sorry on the lack of updates over the past 24 hours ... Most are found here: Introducing - The PureSmoker LEGACY!!

    Anyways ...

    Pricing ...
    Base 18650 Kit - $88.99
    Full Kit (Batts/Charger/Juice/Atty or Carto's - $125.99
     
  16. Firefly13

    Firefly13 Unregistered Supplier ECF Veteran

    I like the slotless tube it looks lovely, good price too, will definitely be getting one !
     
  17. lawnman3

    lawnman3 Ultra Member ECF Veteran

    yes the slots are cool steve but i think both would be better or just make it a option later on. on the next run to have both slotted or non slotted kind of like the satin or media blasted finish option you have now but only with the one option for slotted satin ss or slotted media blasted finishes...
     
  18. empekay

    empekay Full Member

    Glad to see you change your mind!
     
  19. Suicidebob

    Suicidebob Senior Member ECF Veteran

    Funny, I was just looking at your page on my phone and was going to order some new batts for my prodigy and icon. Then, I saw the legacy post and had to jump in here- the unit looks amazing. I'll be ordering one.

    Puresmoker makes the best, yet simple products just to get the job done. LEGACY looks killer!
     
  20. CaSHMeRe

    CaSHMeRe Vaping Master ECF Veteran

    Appreciate the kind words Suicidebob!

    That's pretty much what we shoot for. Simple, User Friendly, Affordable yet still classy.

    Have a great weekend bob!
     
Thread Status:
Not open for further replies.

Share This Page