Introducing to GotVapes - AGI Transformer Dripping & Tank Rebuildable Atomizer by Youde Technology

Discussion in 'GotVapes' started by dannoman, May 1, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. dannoman

    dannoman Forum Supplier ECF Veteran

    Joined:
    Oct 22, 2010
    Location:
    Sugar Land, Texas USA
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    The AGI Transformer Dripper & Tank Rebuildable Atomizer - STNLS
    $44.95 $42.95

    Introducing to GotVapes the AGI Transformer Dripping & Tank Rebuildable Atomizer by Youde Technology.

    Extremely high quality original and unique multi-purpose design by the makers of the AGA-T Genesis, Youde Technology. It utilizes an extremely easy to implement ability to switch from Genesis mode (which uses mesh) to dripping mode (which would use silica or your preference for wick). It is manufactured with highly polished 304 Stainless Steel and its tank is actually a sturdy pyrex glass with medical grade silicon o-rings.

    The UD AGI Transformer comes with a native 510 connection in both tank and dripper mode. You receive a hex key and extra wick and stainless steel 400 grade mesh & kanthal coil to get you started in both modes.

    You Receive:
    • Complete Tank as Pictured
    • Polished 304 Stainless Steel body and caps
    • 1.75mm thick (23mm high) Pyrex glass tank to be used only in tank mode.
    • Hex key, mesh, silica wick, spare screws and headless screws, o-rings in included parts bag.
    • Dimensions: Tank Mode - 48mm, 1.9 inches high, 22mm, .85 inches wide
    • Dimensions: Dripper Mode - 25mm, .95 inches high, 22mm, .85 inches wide
    • This DOES NOT come with a drip tip
    • Warning: The Pyrex tank WILL break if you drop the AGI. All AGI's are inspected before shipment and we are not responsible for replacing any cracked or broken tanks.

     
  2. yiddleboge6

    yiddleboge6 ECF Guru Verified Member ECF Veteran

    Joined:
    Apr 25, 2012
    Location:
    PA
    Thank you Danno....they're a beauty.....love mine :wub:
     
  3. trevor148

    trevor148 Super Member Verified Member ECF Veteran

    Joined:
    Apr 25, 2011
    Location:
    Thomasville, GA
    This is a great rebuildable, one of my favorite features is how you can take the top half off for cleaning. Unlike rebuildables with the 3 nuts on the center post you can just screw off the top and clean out the tank without messing with your wicks.
     
  4. Maxedout

    Maxedout ECF Guru Verified Member ECF Veteran

    Joined:
    Jan 8, 2012
    Location:
    Arizona
    Looks like this is going to be a big hit!
    Time to start saving up a few bucks!
     
    cathnbo likes this.
  5. nathkiira

    nathkiira Ultra Member ECF Veteran

    Joined:
    Dec 27, 2012
    Location:
    TN, USA
    i love this RBA .. been using it almost exclusively since i got it..and incredibly easy to change liquid
     
  6. tschmeck

    tschmeck Full Member Verified Member

    Joined:
    Jul 6, 2011
    Location:
    california

    Does the side post for dripping mode/silica wick have a wire hole on yours? I got mine from a different vendor, and it doesn't, so they're replacing it. I also noticed that the above photo doesn't have the hole either like most silica wicked RBAs do.
     
  7. Hokus

    Hokus Ultra Member Verified Member ECF Veteran

    Joined:
    Jan 19, 2011
    Location:
    Woodstock, GA
    OOOO very nice... wish I had $42 for it :p
     
  8. nathkiira

    nathkiira Ultra Member ECF Veteran

    Joined:
    Dec 27, 2012
    Location:
    TN, USA
    mine does yes..and it came directly from Badkolo =)

    heres the pic i had in the beta thread..shows the hole in the post

    i've since re-wicked and and re-coiled it ..simlar just less wire leads and better wicking

    [​IMG]
     
  9. nathkiira

    nathkiira Ultra Member ECF Veteran

    Joined:
    Dec 27, 2012
    Location:
    TN, USA
    should note this coil and wick i have on it now .. has gone through 14 tank fulls .. with just one dry burn so far .. after the dry burn the wick looked brand new
     
  10. harmonic

    harmonic Vaping Master Verified Member ECF Veteran

    Joined:
    Mar 20, 2011
    Location:
    Desoto, Mo
    I feel I should chime in too - I have noticed with the one I have the top center post can sometimes turn when you are trying to tighten down the positive coil lead which which can overly tighten or loosen the tension going to the coil. But this also means that you can adjust your tension a little sometimes if needed by just turning the post a hair with needle nose pliers...
     
  11. Twinster

    Twinster Senior Member Verified Member

    Joined:
    Apr 12, 2011
    Location:
    Littleton, CO
    I've been fiddling with this RBA for the last couple of days and have tried every wick and wire setup in dripper mode that I know. I'm not sure if it is because the air chamber is so large or what is going on, but the flavor that comes out is very stale/nasty tasting. I own the AGA-T + and have never had any flavor problems with it in the past. Also, I've tried using the liquid on other RBAs that I own without any flavor issues. Anyone have an idea on what may be causing this?

    ***UPDATE

    Interestingly enough, I gave the device a hot bath and scrubbing and connected it as a genesis. The flavor seems to be outstanding in this setup and for me, blows the AGA-T+ out of the water. I'm not sure if it was the bath or the setup itself, but I plan on going back to dripper mode when I'm done emptying this tank and will update again then.
     
  12. stauglocal

    stauglocal Super Member Verified Member ECF Veteran

    Joined:
    Oct 26, 2012
    Location:
    Florida
    How is the draw on it? Similar to the AGA-T?
     
  13. Twinster

    Twinster Senior Member Verified Member

    Joined:
    Apr 12, 2011
    Location:
    Littleton, CO
    For me, the draw on the transformer is a bit more airy than that on the Aga-t+, almost too airy. This could be due to my dual coil setup on the agat+, or possibly because the chamber for the transformer is a little larger. Still haven't finished down the tank for the transformer, but when I do I'll switch back to dripper to see if the bad flavor is gone.

    Sent from my Galaxy Note II - Tapatalk
     

    Attached Files:

  14. stauglocal

    stauglocal Super Member Verified Member ECF Veteran

    Joined:
    Oct 26, 2012
    Location:
    Florida
    It would be nice if you could buy different caps with different sized air holes.
     
  15. Twinster

    Twinster Senior Member Verified Member

    Joined:
    Apr 12, 2011
    Location:
    Littleton, CO
    Yeah. You can put tape over half the air hole to tighten up the draw; I had to do that on my bulli. I was thinking about experimenting with liquid metal or something similar to it a bit more permanent.

    Sent from my Galaxy Note II - Tapatalk
     
  16. ejervjero

    ejervjero Senior Member ECF Veteran

    Joined:
    Jan 16, 2012
    Location:
    Raleigh,NC
    What are you all doing to address the spring issue?
     
  17. nathkiira

    nathkiira Ultra Member ECF Veteran

    Joined:
    Dec 27, 2012
    Location:
    TN, USA

    what spring issue?
     
  18. VapingTurtle

    VapingTurtle ECF Guru Verified Member ECF Veteran

    Joined:
    Jun 26, 2011
    Location:
    The Reef just off the Florida coast
    Here in Florida, we take care of the spring issue by moving straight into summer.
     
  19. rdsok

    rdsok Vaping Master Verified Member ECF Veteran

    Joined:
    Mar 17, 2012
    Location:
    Norman, Ok
    The AGI doesn't have a spring... so no issue
     
  20. Twinster

    Twinster Senior Member Verified Member

    Joined:
    Apr 12, 2011
    Location:
    Littleton, CO
    Transformer does have a spring in the center tube, however, I haven't had any issues with it.

    Update on flavor: Finally finished the tank I was working on. I gave everything a thorough cleaning, installed what I feel to be a great wick and coil, and flavor is good. The only thing I did change was use a different coil and wick wrather than what I purchased from got vapes. The 32g wire from got vapes is almost 3x's the size of my other stuff, which may have been producing the stale metal flavor coming from my original setups. Honestly who knows...i am just happy this thing is vaping like it should.

    Sent from my Galaxy Note II - Tapatalk
     
Thread Status:
Not open for further replies.

Share This Page