- Status
picked one up today from a local B&M for 95$(USD)
It vapes pretty good ( only have a couple of hours on it)
Kinda let down on the material used for the main body tho... stamped aluminum shell with a rubberized plastic sheath
it does have a spring loaded center pin tho
( looks like its gold plated too)
nice firm springs in the battery compartment
the display window is a bit dark, hard to see the display in bright light conditions.
I do like the rounded edges, feels nice in the hand
It vapes pretty good ( only have a couple of hours on it)
Kinda let down on the material used for the main body tho... stamped aluminum shell with a rubberized plastic sheath
it does have a spring loaded center pin tho
( looks like its gold plated too)nice firm springs in the battery compartment
the display window is a bit dark, hard to see the display in bright light conditions.
I do like the rounded edges, feels nice in the hand
remove the mirror window, tape it off leaving only the display part open, and the back side of it but a lil wd-40 on a rag and wipe the mirror coating off. Shines like a star in any light condition.picked one up today from a local B&M for 95$(USD)
It vapes pretty good ( only have a couple of hours on it)
Kinda let down on the material used for the main body tho... stamped aluminum shell with a rubberized plastic sheath
it does have a spring loaded center pin tho
nice firm springs in the battery compartment
the display window is a bit dark, hard to see the display in bright light conditions.
I do like the rounded edges, feels nice in the hand
remove the mirror window, tape it off leaving only the display part open, and the back side of it but a lil wd-40 on a rag and wipe the mirror coating off. Shines like a star in any light condition.
Is there a video on how to do this ¿
No video needed. remove batt cover, remove 2 screws, the cover just slides right out. the mirror coating is on the backside.
If you really need one I can make one for you possibly this evening when I am home from work
Recently got one myself. Decent mod, very comfortable to hold and the materials do feel a bit cheap. I'd give it a 8.5 outa 10
remove the mirror window, tape it off leaving only the display part open, and the back side of it but a lil wd-40 on a rag and wipe the mirror coating off. Shines like a star in any light condition.
I know I'm in the minority, but I don't tinker much with mods. 'HAd some unfortunate experiences while modding computer cases back when that was a thing. Y'know, back when there were desktop PCs, videotape and I loved my Atari 5200 (yep, really) ANyway, while you said this modification was really easy, if it's mot too much trouble, Wraith, I'd sure like to see a photo of it!
Ipv 4 I just got my new ipv4 not have any problem seeing the lens they must have prepared that but I am having problems with the 510 connector being shoved into the battery board I posted some pictures on a Facebook page evapeus anyone having problems with the ohms not getting down low enough or jumping around on these devices when screw the tank on the my device any of my tanks it was pushing the 510 and pinching the wire between the connector and the board black wire causing all sorts of havoc
- Status
Similar threads
