eGo ONE CL Replacement Coil Head by joyetech
The eGo ONE CL replacement coil heads are intended for the joyetech eGo ONE atomizer, included in the eGo ONE Standard and XL kits. They cater to your personal preference by offering different vaping experiences.
Choose between 1.0 ohm and 0.5 ohm coil heads: the 1.0 ohm coil head has a 1.8mm wide airhole and is designed for a mouth inhale, mimicking the feeling of taking a puff on an analog cigarette; the 0.5 sub ohm coil head has a 3.5mm wide airhole and is perfect for a loose draw/direct lung inhale and produces big, warm clouds of vapor.
Replacing the coil is easy: unscrew the base of the eGo ONE atomizer, unscrew the used coil and replace with a new one. To fill with e-liquid, make sure the eGo ONE atomizer is empty, then simply unscrew the bottom/base, tilt the atomizer at a slight angle and drip e-liquid down against the outer wall (be careful not to fill with e-liquid down the center tube, as it will leak out of the bottom of the clearomizer and/or mouthpiece); aneedle-tip bottle makes the task effortless. If using a fresh coil, please set the atomizer aside for a few moments after filling to allow the new coil to saturate completely with e-juice.
Price is for a single piece.
eGo ONE Kits in Standard (1100 mAh) and XL (2200 mAh) size are available:
The eGo ONE CL replacement coil heads are intended for the joyetech eGo ONE atomizer, included in the eGo ONE Standard and XL kits. They cater to your personal preference by offering different vaping experiences.
Choose between 1.0 ohm and 0.5 ohm coil heads: the 1.0 ohm coil head has a 1.8mm wide airhole and is designed for a mouth inhale, mimicking the feeling of taking a puff on an analog cigarette; the 0.5 sub ohm coil head has a 3.5mm wide airhole and is perfect for a loose draw/direct lung inhale and produces big, warm clouds of vapor.
Replacing the coil is easy: unscrew the base of the eGo ONE atomizer, unscrew the used coil and replace with a new one. To fill with e-liquid, make sure the eGo ONE atomizer is empty, then simply unscrew the bottom/base, tilt the atomizer at a slight angle and drip e-liquid down against the outer wall (be careful not to fill with e-liquid down the center tube, as it will leak out of the bottom of the clearomizer and/or mouthpiece); aneedle-tip bottle makes the task effortless. If using a fresh coil, please set the atomizer aside for a few moments after filling to allow the new coil to saturate completely with e-juice.
Price is for a single piece.
eGo ONE Kits in Standard (1100 mAh) and XL (2200 mAh) size are available:
Last edited: