Kanger T3 question

Discussion in 'Clearomizers' started by cocacola31173, Jan 31, 2013.

Thread Status:
Not open for further replies.
  1. cocacola31173

    cocacola31173 Ultra Member Verified Member ECF Veteran

    Just got one of these and I wanted to ask if the really airy draw normal? It doesn't bother me I just want to make sure thats how it supposed to be. Also how long do these generally last? I know you can buy replacement heads but Im just curious.

    Thanks!
     
  2. Ben C.

    Ben C. Senior Member Verified Member ECF Veteran

    Yes, the airy draw is completely normal.

    I've had one last 1 day (gurgling and leaking out of the bag, and after cleanings / etc. never got any better), and then a couple others I have 2 weeks on so far after a couple cleanings.

    FWIW, I like the 'mini' T3 a bit better - noticeably reduced capacity, but better flavor (IMO) and less gurgling. On the full sized T3, that looong center pipe with the head pipe inside it just becomes a perfect condensation chamber. And liquid then gets trapped in between the two pipes - no amount of blowing will help because it's between the pipes, not the central tube.
     
  3. Couture

    Couture Super Member Verified Member ECF Veteran

    T3 I had was like sucking on a broken straw and it leaked horrid. There is a fix for the air draw but the leaking I could never get to stop. I tossed mine and got a mini vivi nova instead, much happier.
     
  4. estrader

    estrader Full Member Verified Member

    It's probably hit or miss with t3. I have 3 and one of the heads started gurgling and I was sucking up juice inalterable 24 hrs. Another t3 I have I use heavily for chain vaping and it gets a burnt taste now on some liquids just after 6 days of usage.
     
  5. spider362

    spider362 Ultra Member Verified Member ECF Veteran

    Where did you get your "mini"?

    I'm trying to come up with a stealth setup and a 400(ish) eGo battery with a T3 mini seems to fit the bill nicely.
     
  6. Ben C.

    Ben C. Senior Member Verified Member ECF Veteran

  7. spider362

    spider362 Ultra Member Verified Member ECF Veteran

    Thanks.

    Too bad they don't sell a 400(ish)mah eGo style battery also. I'd like to get all my parts from one source.

    However, $2.99 for shipping isn't so bad.
     
  8. KySky

    KySky Full Member Verified Member

    I had been using my T3 for 24hrs and did not like the draw on it at all. Then I discovered that there are three small air holes on the base of the T3 that mounts to the battery. I simply took a toothpick and stopped up two of the three air holes. Now the draw is what I was expected it to be in the first place. I never noticed the air holes before and had not seen anyone comment on it when I was reviewing which clearo's to buy.

    Hope This helps your draw issues. BTW, I've had mine for a week now with no leaking issues using 80pg/20vg juice.
     
  9. cocacola31173

    cocacola31173 Ultra Member Verified Member ECF Veteran

    I have found if I just wrap my finger around the base a bit it will tighten the draw up some. I just don't want it to get overheated. I have been trying to get my mother on the vaping wagon and she has used 1 of my cartos and didn't really care for it. I let her try my Kanger and she told me to order her a Vision Spinner and 3 of the Kangers! YAY!
     
Thread Status:
Not open for further replies.

Share This Page