Looking to start building my own for fun

Discussion in 'Rebuildable Atomizer Systems' started by Clark F, Apr 26, 2014.

Thread Status:
Not open for further replies.
  1. Clark F

    Clark F Ultra Member Verified Member ECF Veteran

    I have a bunch of tanks, coils, and drippers, but I like to start building my own.

    The question is which ones are the best quality yet easy on a first timer?

    I don't want to start with something only to upgrade.

    Looking for quality and easy to build.

    I know this has been covered many times, but new things keep coming out.

    Thanks,
    Clark
     
  2. VaPreis

    VaPreis Master Lemo-ist Verified Member ECF Veteran

    Supporting member
    IMO, the best place to start with building your own coils is on a dripper using a regulated mod that reads resistance, such as an MVP (just to name one). A regulated mod will offer some safety in regards to potential shorts or low resistance.

    A simple, satisfying, and inexpensive dripper to begin with is the Igo-L. It's a 2 post, single coil/single air hole dripper with a decent size deck to build on.

    Once you're comfortable with coil building and wicking, you can decide where to go from there.
     
  3. Clark F

    Clark F Ultra Member Verified Member ECF Veteran

    Thanks... someone else also recommended this one. At least it's a start in the right direction.
     
  4. hydruid

    hydruid Full Member

    The igo RDA's are nice I have 3 lol

    Sent from my SCH-R530U using Tapatalk
     
  5. Steamer861

    Steamer861 Ultra Member Verified Member ECF Veteran

    Supporting member
    I don't know if your looking for a dual coil setup but a Helios is one of the easiest RDA's to build the post are up high off the deck and there are 4 holes to trap the wires in Real easy to build :) Also If your looking for an RTA (rebuildable Tank atomizer) A kayfun is is a good choice :)
     
Thread Status:
Not open for further replies.

Share This Page