Mod in a mosfet

[Outcast]

For this mod I would like to add a mosfit our a bigger switch the one in it is 3a/250volt now if u look at the battery part it takes 2 26650 batts so no room batts go from side so to add a mosfet it would need to go on the top part of the mod and I don't think it can be done take a look and tell me how u would add our point out the best switch to put in I'm building.15-.25 coils

Thanks

 

[SupplyDaddy]

Lots of room there in the top for a dual mosfet.

 

[EverPresentNoob]

Yea, plenty of room. Hell you have enough room to ad a volt meter if you want as well! Put the mosfet in the top part on the back wall behind the wire in the pic.

 

[Outcast]

Yea, plenty of room. Hell you have enough room to ad a volt meter if you want as well! Put the mosfet in the top part on the back wall behind the wire in the pic.

The one I'm getting has a built in charge on the back wall I think I have a pic from the moder


Sent from my iPhone using Tapatalk

 

[Outcast]

Sent from my iPhone using Tapatalk

 

[EverPresentNoob]

If that is like the mod your talking about, put it on top above the fire button beside the 510 connector. as long as the connections are insulated (Which they should be regardless) you shouldn't have an issue.

 

[Outcast]

Thanks


Sent from my iPhone using Tapatalk

 

[Outcast]

I have an idea or I want to know if this'll work thinking about rewiring this a little bit so run the power from the positive battery directly to the 510 bring the ground over towards the switch and make some sort of a mechanical switch complete and the circuit by doing this what I still be able to keep the charger portion


Sent from my iPhone using Tapatalk

 

[Outcast]

So I need a hand I'm going to with a plunger type mech switch home made I think I have down what I'm going to do run the power form the batt to 510 then run the ground over to the plunger end now dose the plunger need to be insulated ?


Sent from my iPhone using Tapatalk

 

[dc99]

Yes, or it would continuously fire. JMO but buy a 10dollar sled off ebay, a couple of irlb3034 mosfets and a resistor and wire it like this:

 

[Outcast]

Yes, or it would continuously fire. JMO but buy a 10dollar sled off ebay, a couple of irlb3034 mosfets and a resistor and wire it like this: View attachment 490858

You really think it needs a sled


Sent from my iPhone using Tapatalk

 

[dc99]

I would use a sled.