Modding Vapor Flask for squonker

[cough]

Hey, few days ago i see its will be soon possible to buy vf squonk

but i have already mine normal vf, and i thinking to modding it for squonker my self, i know almost everythink, replace 510 for fdv v3 low profile bf , drill a hole on side for squonk, finish it with dremel, but i cant get one thing, how to make easy remove bottle, the only way i discover will be unscrew top plate, disconect tube from 510 and then unscrew bottom cap and popout bottle. Maybe someone here have better and faster idea how to remove bottle without touching top plate?

 

[asdaq]

Hey neighbor!

With that you want access from the bottom only, and if you have a needle at the bottom of the connector that inserts into the bottle and the bottle fits the space precisely, you just press it into place and it auto-centers.

There is a pic in the following post, somehow I can't paste his image here...

post 2205 from http://www.e-cigarette-forum.com/fo...rs-place-everything-modified-custom-made.html

Hope this helps

 

[cough]

great idea, but you think it will seal properly? also you know where get that needle for 510?

 

[cough]

ok i see fdv Bottom Feeder Bottle Attachment should work

 

[cough]

last thing, do i need also Short Bottom Feeder Pin 5-Pack ? or only thin needle from Bottom Feeder Bottle Attachment?

 

[asdaq]

Not sure about your last question, but a quote from their facebook page:

Sits perfectly on top of the 510 V3 BF posi pins

I'm not up on version differences, but you could drill out positive pins or add orings to make them right.

 

[holycrap]

I bought a fat daddy v4 and I had to buy the pack of hollow pins. It came with a regular pin if that helps