Modifying your mods

Discussion in 'Reos Mods' started by redeyedancer, Sep 30, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. redeyedancer

    redeyedancer Forum Supplier ECF Veteran

    Joined:
    Feb 4, 2010
    Location:
    Maine
    So the new craze is to mod your reo to address voltage drop. Most people wouldn't even notice the difference. The thing is, most people shouldn't be altering their devices. If you have a background in electronics and you're aware of the risks, that’s another story. Removing the spring and replacing it with a loose fuse is a bad idea. There is room for something to go wrong and it will for someone. Someone is going to have a melt down doing this, I know it for a fact. Without the spring the battery can't drop and break the connection if there is a short. My first priority is safety.


    I am working on a kit for sub ohm vapers that will reduce the voltage drop safely. I will push this as hard as I can to get it done quickly.

    Please note that modifying your Reo nullifies the warranty. That doesn't mean I won't make repairs in the event of a problem, it just means you will be charged for the repairs.
     
  2. turbocad6

    turbocad6 Ultra Member Verified Member ECF Veteran

    Supporting member
    Joined:
    Jan 17, 2011
    Location:
    brooklyn ny
    if that fuse contacts the battery door or any part of the body with the top leg then it will render the fuse protection completely useless, and you def are correct that it can cause a big problem in the event of a short. bravo for addressing this and even more so for actually working on a solution, very impressive...
     
  3. nerak

    nerak ECF Guru Verified Member ECF Veteran

    Joined:
    Feb 12, 2011
    Location:
    Stuckin, OH, USA
    I have been reading and cringing for a week now reading different threads.

    I am one that will NOT be changing anything in my REO's. I will keep my ohm's at .9 or higher.

    Thank you Robert for stepping up and putting this in a sticky thread.

    Your kit sounds like it will give those Reonauts that want a viable option.
     
  4. Vash

    Vash Unregistered Supplier ECF Veteran

    Joined:
    Oct 21, 2012
    No modding here and keep ohms at .8-1.0 .

    Will wait for your kit and play it safe :)


    Thanks for looking outt for everyone Robert!
     
  5. unsure

    unsure ECF Guru Verified Member ECF Veteran

    Joined:
    Feb 6, 2010
    Location:
    Silicon Valley, California
    I didn't buy the best and hassle free mod only just to work on it. Hell, if could get out of changing batteries and refilling juice I would! ;)

    EDIT: FYI, my post wasn't meant to be a jab of those that do...just nothing I need nor ever want to do.
     
  6. JC Okie

    JC Okie REOnaut Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 2, 2010
    Location:
    Tulsa, OK
    +1^^^ Exactly. Never have/never will modify any of mine.....probably won't be buying a kit.....appreciate the fact that you're addressing the situation. [Karen: Have done my share of cringing right along with ya.... :)]
     
  7. super_X_drifter

    super_X_drifter mentally_UNSTABLE_freak Verified Member ECF Veteran

    Supporting member
    Joined:
    Oct 4, 2012
    Location:
    Somewhere out there
    I hear you Rob. Thanks for looking out for us and our mods. I won't be leading anyone else down the path :)
     
  8. NumberOneBatfan

    NumberOneBatfan Super Member ECF Veteran

    Joined:
    Jul 28, 2013
    Location:
    Silverton, OR
    I got as far as taking my spring out, scraped a tiny bit of paint off which gave me a sick feeling in my stomach, then decided to wait for your "official" mod. When i sat down at the computer, this post was waiting for me. Made the right choice yet again Bats.
    Close.....a little too close.
     
  9. FeistyAlice

    FeistyAlice ECF Guru Verified Member ECF Veteran

    Joined:
    Aug 24, 2010
    Location:
    Near Dallas Texas
    I'll fess up to doing a lot of cringing, too! I don't see needing a boost, personally, as I don't do ohms much lower than 1.4 with my sweet juices, but I can see maybe, just maybe, doing a little boost on Mini 1.0s. So, if Robert does his "endorsed mod" for the 14500 I may give one or two a whirl.

    And thanks so very much, Robert for all you do and for this OP.

    {edit} Many of my AW batteries have some age on them. New 14500s would probably give the 1.0s some boost and vape time but I'd rather direct my money elsewhere right now.... Like a couple more RM2s for example.:)
     
  10. MXBNW

    MXBNW ECF Guru Verified Member ECF Veteran

    Joined:
    May 15, 2010
    Location:
    NW Washingtion
    Well said Rob.

    For myself a long time REO user I am very happy and always have been with the REO.

    Progress has been made over the last few years in the regards to performance of all REO’s

    But the Safety of the REO has always been a big seller for me. This is one of the reasons I put one in my wife’s hands and did not worry about her safety. That was the last thing I need her to worry about when she was trying to quit smoking.

    Rob has always thought of our safety first. I am sure that will always be his #1 priority.

    Now with that said there is always new ideas to explore and new breakthroughs in vaping will continue.
    The New BF-RBS’s have only hit the REO and the Vaping world in the last year or so. Before that it was how good were the 1.5 ohm attys and where to buy them or the best carto to use on them. Oh and there was the 6v craze that has come and gone.

    I have seen a lot of new items come out and most have gone by the wayside.
    The REO has always worked (In my Opinion) on simple and safe is better principle.

    I am sure in time (When Rob gets some) there will be new updates to the REO but it all takes time.

    As a small business owner myself, I know I will never be able to please everyone but always try to build my business so our product will works as intended for the majority that use our service and we are always open to new ideas. There is always a work around for the special cases but they're less the 1% of our product users.

    I am sure Rob looks at it the same way. (I could be wrong on that, but I doubt it)

    Keep up the good work Rob, It’s been a long run and I am proud to say I was there in the beginning. I always will be a REO user and supporter of the REO.

    I am also proud to call you friend.
     
  11. cags

    cags Vaping Master Verified Member ECF Veteran

    Joined:
    Jan 27, 2011
    Location:
    east TN
    those threads make me grateful I like the reo "out of the box"
    :)
     
  12. Vapeaddikt

    Vapeaddikt Super Member Verified Member ECF Veteran

    Joined:
    May 29, 2013
    Location:
    REOville
    I am fully aware of the risks much like when I was in the custom PC business overclocking/making custom tailored bios rom's for motherboards ect and do appreciate the warnings.

    If I melt something down I fully understand it is of my own doing. I will still be purchasing your subΩ kit Rob once it's available.

    For whatever its worth I purchased the tubled raw with the intention of mod'ing it. My original black and metallic blue remains and will remain stock.
     
  13. Xobeloot

    Xobeloot The Dirty Monkey Verified Member ECF Veteran

    Supporting member
    Joined:
    May 29, 2013
    Location:
    Grafenwöhr, Germany
    I love all my reos straight out of the box, but I also love to tinker. To me, tinkering is just as relaxing as a nice vape and a beer after work.

    I'd like to think that those of us tinkering with our mods know what we are doing and understand the risks, but like Rob said... there's always the one who doesn't.

    I look forward to seeing Rob's mod kit, as well as seeing how many of our ideas get incorporated into it ;)

    Vape on!
     
  14. MamaTried

    MamaTried Vaping Master Verified Member ECF Veteran

    Joined:
    May 31, 2013
    Location:
    Northern California
    don't worry about it Monkey.

    i'd be willing to bet that Rob realizes (like the rest of us) that you, pdib, dhomes and a few of the others are just freakin flat-out nuts...

    ... and it's really the rest of us putzes that he worries about, because you dudes are way past hope, redemption or salvation...









    umm, that's my way of agreeing with your post :)
     
  15. Vash

    Vash Unregistered Supplier ECF Veteran

    Joined:
    Oct 21, 2012
    So we have Reonauts and Reonutz ......LoL Just messing with you mad modders yo!
     
  16. Xobeloot

    Xobeloot The Dirty Monkey Verified Member ECF Veteran

    Supporting member
    Joined:
    May 29, 2013
    Location:
    Grafenwöhr, Germany
    You totally just inspired my next reo video... it's going to be a doozey!
     
  17. jcalis1394

    jcalis1394 Forum Supplier ECF Veteran

    Joined:
    Jul 29, 2013
    Location:
    Miami, FL
    Yes we are :lol:

    To be honest I think everyone can benefit from this kit. The resulting decrease in vDrop will even allow for better battery life and even bigger micro coils that'll get you the same power you were getting from smaller ones.

    I have modded all 3 of my REOs. Hell, when I got my copper vein the first thing I did, the very first thing, was remove the spring, sand it down and place a fuse. I've been rolling all 3 of my REOs with the fuse mod no problem at 0.5 ohms each. I got a guy to buy a REO but he wanted both flavor and clouds, so there is a certain population that wants that sub-ohm performance. We all got a different sweet spot :D. If you feel like you are not missing out on anything and your setup gives you that vaping nirvana, then you probably won't want to look into modifying anything. I was reluctant to try anything below 0.8 ohms saying it wasn't necessary. Well turns out I gave it a fair shot and now I'm stuck at 0.5-0.6 ohms. You never know 'till you try :p.

    I'm very excited to see what Rob comes up with. I'm still glad I sanded down the area of the spring even if I end up using one again, it still gives me the sense of better conductivity. Oh yeah, I love to tinker. Can't help it :p :lol:
     
  18. cags

    cags Vaping Master Verified Member ECF Veteran

    Joined:
    Jan 27, 2011
    Location:
    east TN
    just reading that just gives me a headache :lol:
     
  19. jcalis1394

    jcalis1394 Forum Supplier ECF Veteran

    Joined:
    Jul 29, 2013
    Location:
    Miami, FL
    Shhh...it was intended, don't uncover my plot :lol: :lol:
     
  20. azzaman

    azzaman Ultra Member Verified Member ECF Veteran

    Joined:
    Jan 12, 2012
    Location:
    Brisbane, Australia
    I'm too lazy to tinker with things. I buy a product so the hard work is already done for me. As much as I enjoy seeing guys mod there mods, probably not the best idea to post it, as someone with less experience is going to try it and blow half their face off.
     
Thread Status:
Not open for further replies.

Share This Page