Mods by Chels - mini-ecig

[Woofer]

She doesn't miss a trick, that one.

neither do you apparently

 

[Katdarling]

Not one to korrect a Kat, but actually, "somewhere in between".

We wait & wish to tootle with XvoSticks.

Would that be Door #1.5?

I can do that one. Oh yeah! And I might fit thru the 1/2 door, , , jus sayin'.

And thank you, gentlemen.

Woofer, now that you've apparently learned Rule #1, you can stay.

 

[drugarth]

ooh this one slipped under my radar...looks really nice.
They state that a 510 clearomizer <23mm will fit, anyone tried this with a 20mm? I am thinking of perhaps pairing it up with the sense herakles hydra (because of factory coils and topfill)....will that make a good combo?

 

[Woofer]

I can do that one. Oh yeah! And I might fit thru the 1/2 door, , , jus sayin'.

And thank you, gentlemen.

Woofer, now that you've apparently learned Rule #1, you can stay.

You are welcome gentlewoman.
I have always known Rule #1 for it is my Rule #1 also, you can stay too.

The Donkey is very quiet.

 

[drugarth]

OK some more questions:
tried to order one but is needs me to select a style, but only the black/brass buttons option is showing. I need one with the Stainless steel buttons......they are not in this production run?
Anyone try this with a sub tank mini?

 

[DPLongo22]

neither do you apparently

Well.... now that you mention it...

I can do that one. Oh yeah! And I might fit thru the 1/2 door, , , jus sayin'.

And thank you, gentlemen.

Woofer, now that you've apparently learned Rule #1, you can stay.

With ease, you'd fit. And with clearance too.

uh-oh.

ooh this one slipped under my radar...looks really nice.
They state that a 510 clearomizer <23mm will fit, anyone tried this with a 20mm? I am thinking of perhaps pairing it up with the sense herakles hydra (because of factory coils and topfill)....will that make a good combo?

If nobody pops in, see me in about 10 days (guessing). I have a couple of 19's that I will be trying it with. Not for long term use, but I wish to know.

You are welcome gentlewoman.
I have always known Rule #1 for it is my Rule #1 also, you can stay too.

The Donkey is very quiet.

A busy man, he.

OK some more questions:
tried to order one but is needs me to select a style, but only the black/brass buttons option is showing. I need one with the Stainless steel buttons......they are not in this production run?
Anyone try this with a sub tank mini?

Keep an eye on the site each day. They seem to pop in and out of availability.

 

[drugarth]

darn..out of stock...put myself on the stock update list...I want this bad...wil look awesome with a black subtank mini I hope now the waiting game begins....gives me time to figure out the paypal thingee (never used it before LOL)

 

[DPLongo22]

darn..out of stock...put myself on the stock update list...I want this bad...wil look awesome with a black subtank mini I hope now the waiting game begins....gives me time to figure out the paypal thingee (never used it before LOL)

Get registered in the classifieds here too, once you get your PayPal setup (it's relatively simple to do). It's rare, but I have seen a couple for sale here.

Also keep your eye on VapinArt. I've yet to see them with the SS buttons, but it could happen.

 

[Katdarling]

With ease, you'd fit. And with clearance too.

uh-oh.

Careful, DPL...

 

[SeniorBoy]

Preliminary thoughts: Received from VapinArt in two days. Love love love the form factor. One pic is a full sized KFL clone and the other is a KFL Mini/Nano clone. The swirl machining marks on the bat cap don't bother me but they might bother you. I was concerned about accidently pressing the + or - buttons but as you can see they sit signifactly lower than the fire button so I'm not concerned. I like the fire button as it's a short throw. Subjectively, the shortest throw of any of my other mods. I don't notice any air flow restrictions. The 510 adjustment is very firm as you back out the allen screw which is just the way I like it. Chip passes the easter egg test for an authentic Evolv DNA 40. I did notice a very small "nick" in the coating which exposés the anodized aluminum. I used a magic marker and it's gone. I will probably wrap it via jwraps. I'm a flavor chaser so it's a single Kanthal coil using around 15 watts on a 1.3 OHM build. Seems to hit just fine. I lubed the little thing with DeoxIT Gold. I have pressed the screen a few times just to see what the foam cushion does. Seems very firm and is recessed. If push comes to shove, I think I could replace it with glass or maybe a screen protector film of some kind. I'm running a Samsung R25 bat with no rattles from the mod. I noticed a small amount of condensation (not a leak) around the edge of the 510. I'm guessing this just comes with the territory and doesn't bother me. I would rate the fit and finish as "good" but that's only my views. This is my exclusive out and about mod so time will tell me how it holds up.

HTH

 

[drugarth]

@SeniorBoy: do you perhaps have a Kanger subtank mini? And if so could you perhaps post a picture of it in the xvo?

 

[SeniorBoy]

I would be happy to help but I don't own a Kanger subtank mini. I looked and it looks like the base is the same size as a KFL (22MM) and the height is about the same size as a KFL so in this respect you should be fine. One things for sure, you won't be adjusting the AFC after you screw the atty onto this mod. You could set the AFC on another mod.

Good luck

 

[drugarth]

OK thanks for the info, is helpfull!

 

[Woofer]

I don't own a Kanger subtank mini.

That is worth two likes.
Congrats on the Xvo!

 

[drugarth]

Hehe couldn't help myself...order 5145 is in for the Xvo stick and Merkava tank
Also bought a crap load of DIY stuff to start getting the coiling thingee down

My wallet weeps

thanks for the all the useful info you gave!

 

[DPLongo22]

Hehe couldn't help myself...order 5145 is in for the Xvo stick and Merkava tank
Also bought a crap load of DIY stuff to start getting the coiling thingee down

My wallet weeps

thanks for the all the useful info you gave!

Don't stress the wallet at this point, drugarth. It will pan out (I guarantee it).

I skimp absolutely NOWHERE and have still saved 50%, compared what I'd previously been spending on smokes. That (savings) number could have been 75% with very little effort.

I chose to live - with zero regrets.

 

[DPLongo22]

And congratulations on your decision to order.

 

[drugarth]

Hehe I hope so....last month I bought a Sx mini M, the month before that a Sig 75 and some subtanks mini...Also needed to buy a coiling kit and DIY stuff for the Merkava
LOL...getting expensive fast

After working for 6 months with a Istick and Nautilus Mini shinyittus has struck all of a sudden....lol...aahh I had some extra money reserved so all is good !!

But should be set for now!...so no more buys for a while....ooh except some more DIY bases and flavors But that will be the last, I promise

 

[DPLongo22]

But that will be the last, I promise

The number of times we've all said THAT...

 

[Katdarling]

Don't stress the wallet at this point, drugarth. It will pan out (I guarantee it).

I skimp absolutely NOWHERE and have still saved 50%, compared what I'd previously been spending on smokes. That (savings) number could have been 75% with very little effort.

I chose to live - with zero regrets.

View attachment 485742

I WANNA CHART!!!!!!

But should be set for now!...so no more buys for a while....ooh except some more DIY bases and flavors But that will be the last, I promise

Let me be the second to tell you...... this is abstolutely not gonna happen!