MVP 3.0 pro resetting

[BrownManVapes]

I've noticed that sometimes in the mornings the mvp is cold to the touch and the settings are reset to 4.0 volts. I usually keep it in wattage mode around 35. It will also not fire for at least 5 or ten minutes. It reads the atomizer just fine but the moment I fire it I can hear a faint beep and it resets again. Any idea as to why? Could it really just be my AC is too low?

 

[BrownManVapes]

A little more info. I use a sub tank mini as well as a mutation xv4. And it seems to be occurring more frequently. When the fire button is pressed I hear a click sound and the screen just flashes the logo. The indicator light keeps flashing red and green. Any ideas what it could be?

 

[DazAdams]

I've noticed mine has switched to volts from wattage a couple of times recently. No idea why. Not had any flashing lights yet though.

 

[serene.in.dallas]

Mine would do that when my ohms would jump too much because of a loose screw on an rda. Sounds like the mod is protecting itself from something by resetting, or maybe its just malfunctioning. Make sure your connections are tight, might be thermal contraction and expansion, and the 510 isnt jammed stuck in your mod.

 

[BrownManVapes]

Ive tried 3 different tanks and 3 different rda's. It's always the same connections are all tight. How do I check the mod if it is in fact the 510