Been wanting more power - and Wanted it portable
Here is my results. Yeah it kinda looks like a screwdriver.
If anyone is interested - I can make another and post the assembly in a slideshow video or pics or you can PM me and I will talk you thru it.
Power is supplied by 2 - CR2 800mah Rechargable Li-ion bought on Deal Extreme
DealExtreme: $4.28 Rechargeable 3V CR2 800mAh Green 2 Packs
$4.28
Charger
DealExtreme: $5.66 CR2 Battery Charger
$5.66
Case is a Flashlight from Harbor Freight
Harbor Freight Tools - Quality Tools at the Lowest Prices
On Sale in Store for $3.97 (Yeah you get two)
One DEAD Battery or New if you Cant Wait.
$0 - $15
One Tactile Switch
$0 - Junk Box - OLD VCR
One Small chunck of 1/2 PVC Sch. 40 (Must be Sch. 40 - 600psi WILL NOT WORK ) $0 - Junk Box - Hardware Store
Total Cost - (w/Spare Set of batteries)
$18.97
Tools needed -
Soldering Iron
Hot Glue Gun
Dead Atomizer - to disassemble the Battery (Makes it real easy)
Small Hand Saw - I used my Leatherman tool
Drill and Bits
Flat Black Paint if you want the Face to look good.
THE RESULTS -
Assembled
Light
Disassembled
Connection
Happy vaping
Here is my results. Yeah it kinda looks like a screwdriver.
If anyone is interested - I can make another and post the assembly in a slideshow video or pics or you can PM me and I will talk you thru it.
Power is supplied by 2 - CR2 800mah Rechargable Li-ion bought on Deal Extreme
DealExtreme: $4.28 Rechargeable 3V CR2 800mAh Green 2 Packs
$4.28
Charger
DealExtreme: $5.66 CR2 Battery Charger
$5.66
Case is a Flashlight from Harbor Freight
Harbor Freight Tools - Quality Tools at the Lowest Prices
On Sale in Store for $3.97 (Yeah you get two)
One DEAD Battery or New if you Cant Wait.
$0 - $15
One Tactile Switch
$0 - Junk Box - OLD VCR
One Small chunck of 1/2 PVC Sch. 40 (Must be Sch. 40 - 600psi WILL NOT WORK ) $0 - Junk Box - Hardware Store
Total Cost - (w/Spare Set of batteries)
$18.97
Tools needed -
Soldering Iron
Hot Glue Gun
Dead Atomizer - to disassemble the Battery (Makes it real easy)
Small Hand Saw - I used my Leatherman tool
Drill and Bits
Flat Black Paint if you want the Face to look good.
THE RESULTS -
Assembled
Light
Disassembled
Connection
Happy vaping
Last edited: