My latest mod is a whopping 10400mah @3.7v

Discussion in 'Modding Forum' started by atomizer mizer, May 7, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. atomizer mizer

    atomizer mizer Senior Member ECF Veteran

    Joined:
    Mar 1, 2011
    Location:
    USofA, Alabama
    I panicked this morning when my last battery started to die on me. I pulled out the soldering gun and a few spare parts and came up with this. It actually pulls a strong cloud of juice considering it's primitive appearance and dangerous bare wires. The battery pack fits well in my shirt pocket and if I am leaning back in my chair the switch and tank don't bounce around. Strictly for computer desk\chair use.

    I hope no one takes this mod as a serious design. It should only be used where fire insurance has been purchased. ;)


    PE060556.jpg

    PE050552.jpg
     
  2. Vaslovik

    Vaslovik Ultra Member ECF Veteran

    Joined:
    Jul 5, 2013
    Location:
    Cape Coma Florida, USA
    oh gosh, I'm really not sure what to say about this....
     
  3. asdaq

    asdaq Vaping Master Verified Member ECF Veteran

    Joined:
    Feb 23, 2010
    Location:
    poland, and the brassy lands of google
    Are these Sony cells by chance from a spent laptop pack? I hear your caution of "don't try this at home", but would underscore this with the impression of a snail without it's shell or maybe a PSA for not smoking in bed....

    Since you want this for in a chair or in front of a PC, why not get/build a passthrough?
     
  4. joecil

    joecil Super Member Verified Member ECF Veteran

    Joined:
    Jan 9, 2014
    Location:
    Russell Springs, Kentucky
    Now here is a safer setup for you with a 10,000 mAh battery supply. Use one of these Mini eGo USB Passthrough - MyFreedomSmokes.com attached to one of these Fost 10000mAh Battery Power Charger Bank for iPhone 4 4S 5 5c 5S iPad 2 Outputs | eBay or you can plug it into a USB wall outlet or even a car lighter system with USB. Variable voltage with settings at 3.2, 3.7, 4.2 and 4.7 provided the USB port has the output for 4.7 volts which not all do. All of mine do except for 1 of my 3 laptop usb ports.
     
  5. TomCatt

    TomCatt Da Catt Verified Member ECF Veteran

    Supporting member
    Joined:
    Mar 8, 2011
    Location:
    Upland, PA
    Bring on the Vapepocalypse! We don' care! :D

    :thumbs:
     
  6. vapero

    vapero Ultra Member Verified Member ECF Veteran

    Joined:
    Mar 13, 2013
    Location:
    monterrey,mexico
    love it!!!!
     
  7. Maurice Pudlo

    Maurice Pudlo Ultra Member Verified Member ECF Veteran

    Joined:
    Nov 27, 2013
    Location:
    United States
    You Sir have won the internet, congratulations.

    I for one love it,
    Maurice
     
  8. atomizer mizer

    atomizer mizer Senior Member ECF Veteran

    Joined:
    Mar 1, 2011
    Location:
    USofA, Alabama
    It seems to draw well considering the sony's. And yes they are laptop pulls. I think they were green before the heatshrink. My NCR 18650'S 3400Mah cells don't fit in the holder so I threw the sony's in.

    Thank you for the suggestions but this was more of a pointless exercise in futility. ;) But now I know if the apocalypse occurs I can do what needs to be done.
    Another observation I have is how will the feds regulate e-cigs when their are fools like me building contraptions like this?

    I did purchase a couple real VV\VW mods so this contraption will be disassembled as soon as possible.I couldn't depend on this as a primary device and purchased a KSD Kmax Variable Voltage Mod and an Acrylic Variable Volt APV from Madvapes.
     
  9. CplMajor

    CplMajor Full Member Verified Member

    Joined:
    Mar 14, 2014
    Location:
    Louisville, Ky
    That's a pretty cool. . .whatever you call it lol
    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page