1. SFATA power breakfast with California State Senator Joel Anderson

    Dear Guest, 

    SFATA are being hosted by California State Senator Joel Anderson this Weds for a "power breakfast". You can bring your input and ideas to him at his El Cajon district office between 9.30 and 10.30. If you're interested and can attend, please visit www.tinyurl.com/SFATApowerbreakfast
     to book a place. Thanks!

    Dismiss Notice

New Zen owner review & big thanks to this forum!

Discussion in 'ElectroNicStix' started by ARCHMAN, Jan 26, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.

    ARCHMAN Senior Member Verified Member ECF Veteran

    Jan 22, 2014
    Howdy folks! Today, in my possession, I have a Zenesis 2 CT 18350.

    I wanted to upgrade from a Kangertech EDOV/T3S and I was certainly blown away at all of the different systems. I wanted something that was a pleasure to use and own. I was obviously immediately attracted to Mechanicals but building coils, likeliness of spilling juice and all that really seemed like a bit of a PITA. Then I discovered the Zen 2 Carto Tank system!
    I orders from electronicstix on Wed. and got a package today (Sat)!
    Some thanks are in order!
    1st, thank you Chops for your quick responses!
    2nd, well... there are soooo many peeps here that deserve thanks it just might be impossible to list you all. Through your input, setting this thing up was a breeeeeze! There is so much info here I felt like a "pro" before even having the thing in my hands. THANK YOU ALL!!

    I'd like to give some initial impressions. First off, the packaging as received from electronicstix was superb. I can't even imagine the stock of various "zip lock" bags you folks must keep on hand! I bought the Zen, two mini glass tanks, 5 reg LV cartos, a SS "hourglass" drip tip, 3 batts, a charger and a few 30ml bottles of e-liquid. The first thing I did was read the instructions on the "Efest LUC V4" charger and get my three new 18350s juiced up. Next I began to un package the Zen 2 CT. The first thing that really hit me was the weight. This thing is a dense little bugger! It is smaller than the specs listed on the site which I'm stoked about! Time for a QC inspection!:
    I am no stranger to high end machining and perhaps I am a bit nitpicky. I used to be a dealer of "Arc Flashlights" and Chris Reeve Knives (also out of Boise, ID!) in the early 2000s. These are some of the finest machined products made. I also have several other items of similar make, for example, PSDproducts.com. Let's get any "cons" outta the way first. In order of my noticing:
    There is zero paperwork or instructions that came with mine. That's just silly! The glass tank has a looser fit than I thought it would. Not loose, per se, but it could have a tighter fit. All of the threads were a little gunky. There were no metal shavings in there, just dirt or something. The first thread of both male pieces (the switch and the tank bottom) both have a HONKIN' burr on them. They are both very coarse and sharp. It's not a deal breaker but it is a bit of an eyebrow raiser. The machining of the logo on the bottom seems to be either hastily done or the mill needed to be re tooled. In my opinion it could certainly be neater and crisper. I don't see any great reason for the top cap to be so tall, thick and heavy except to decrease machining cost (which may be necessary at this point). I would say that the most significant shortcoming though is also the easiest remedied. The bevel on the switch was downright sharp on the edges... not with a crisp edge, but with a machining burr. Holding it in the hand and activating it with the pinky would certainly be uncomfortable after only a few puffs. It took me less than one minute of filing it with a fine ceramic sharpening stone to get a perfect feeling and looking chamfer (bevel). That's it, really, for the shortcomings. I'm not knocking the product. I'm sure the folks at Zenesis are working their fingers to nubs getting these things out the door so that you and I can enjoy them. That is the number one feeling I have about the product. I am enjoying it!

    LOVE the feel of it. Love the size of it especially with the mini glass/regular carto. It is a beautiful piece of functional minimalist art. I dig its simplicity in use. All other machining is great. The finish, overall, is very good. The glass that it came with is flawless as are the two colored minis I bought. Typically I see "knurling" as a cut corner (vs. machined fluting) but this is done very well. The delrin parts are perfectly milled. The button is well thought out in design. It requires more pressure than I thought it would but seems perfect for pocket carry & avoiding what I will call "crotch firing." Battery rattle is much less than expected. I'd say there is around 1mm of "slide" in there. If anything, I actually like it. The contact screws in mine are Allen heads. They are "button head" type screws but they are flat around the Allen hole. LOVE to see a product getting tweaked and upgraded as new batches are made!

    Surely I've left out some impressions & even more likely more will come as I settle in with this thing. I've only had it for six hours now!

    Let's talk about setup and vaping!
    Again, THANKS TO YOU ALL for your own trial and error and sharing your personal experience!!! It is certainly not a complex machine but you made it practically effortless! I did end up flooding the cartomizer a little but it still atomized the liquid fine and I just blew the excess fluid out through the intake holes (around a drip through each hole). A few vapes and it's working flawlessly. I have zero complaints.

    All in all I just wanted to thank you all & offer a newbie's perspective on my Zenesis 2 CT 18350. Thanks for reading it!
  2. Zebassis

    Zebassis Senior Member Verified Member ECF Veteran

    Jan 28, 2012
    Sandy Hook CT

    ARCHMAN Senior Member Verified Member ECF Veteran

    Jan 22, 2014
    Yup! Those are the ones. I got two of the "smoke" colored ones. They are WAY darker than they look in the pics though. To use the mini glass you use the regular sized (punched) 35mm cartos.

    Funny I could not find any info out there about that topic either!
  4. Zebassis

    Zebassis Senior Member Verified Member ECF Veteran

    Jan 28, 2012
    Sandy Hook CT
    Thanks! Ordered 1 teal, 1 green and the carto tank.

    Just don't tell anyone I'm going to use it on my ZNA. Whoops, too late...... Only at work though, at night it gets used with the Russian 91% and the Ithaka. :)

    ARCHMAN Senior Member Verified Member ECF Veteran

    Jan 22, 2014
    Fancy! Seriously diggin this thing myself.

    ARCHMAN Senior Member Verified Member ECF Veteran

    Jan 22, 2014
    A little update:

    The vape is good & I'm certainly still digging the way this thing feels and looks. I would say that most of the "pro's" of this thing are fairly obvious (at least to me) so I will concentrate on constructive criticism.
    The fit of the top cap into the glass leaves something to be desired. The top cap is really wiggly & can almost be pulled out just by picking it up by the drip tip. I find that it constantly needs to be treated with kid gloves. Also the top cap is unnecessarily massive & heavy. If the drip tip was fitted into the carto it would save material and shave off length and weight while sturdying the whole device. It also makes the delrin cup in the top an unnecessary afterthought. I reckon it is just made to look like a RBA.
    Despite the high pressure required to activate the button I'm having to be very careful to not fire this thing in my pocket. I've carried it in a shirt pocket mostly but not all my shirts have pockets. Plus it's taken a few nose dives out of a shirt pocket so far. I would definitely prefer it to have an easier throw and have a locking ring.
    I do really like the device especially as an intro to mechanical mods. They seem to be the most reasonably priced non outsource made complete package available. Plus they are readily available which is huge. It is definitely a specialty item that is not for everyone. But that is very common with all of my "gear." The one thing that would keep me from recommending this would be the loose fitting top cap. I'll be on the search for thicker o-rings sooner than later.
  7. Peter_C

    Peter_C Who? Verified Member ECF Veteran

    Nov 7, 2013
    Akron, Ohio

    ARCHMAN Senior Member Verified Member ECF Veteran

    Jan 22, 2014
    I actually ordered an ibtanked setup this AM!
Thread Status:
Not open for further replies.

Share This Page