Odds of getting a decent Nemesis from FT

Discussion in 'New Members Forum' started by shroomalistic, May 18, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. shroomalistic

    shroomalistic Senior Member ECF Veteran

    Joined:
    Apr 20, 2014
    Location:
    Palm Desert, California (Palm Springs Area)
    so I ordered a few new goodies from FT and im hoping my luck continues.

    https://www.fasttech.com/products/1448300

    ordered that nemesis, Im hoping the HCigar 3D RDA that I just ordered from ebay will fit it properly.

    Along with the Nemesis, I ordered the Kayfun 3.1 es, a nano kit, a custom top kit, a hybrid adapter, the switch magnet set, PC Tank yellow full size and yellow small size clear plastic and the blue tube nemesis set along with a few different red drip tips. I wanted to have a few different options for it along with a superman theme :D .

    Whats my odds of everything fitting and what manufacturer makes that version of the nemesis?
     
  2. RichRod

    RichRod Super Member Verified Member ECF Veteran

    Joined:
    Mar 17, 2014
    Location:
    South Lake Tahoe, CA
    well lets see theirs almost 900 reviews and it has 4.5 stars so im assuming itll be pretty darn good
     
  3. TheBergMan

    TheBergMan ECF Live Chat Moderator Verified Member ECF Veteran

    Joined:
    Mar 12, 2013
    Location:
    Tupelo, Ms
    You should be fine.
     
  4. edyle

    edyle ECF Guru Verified Member ECF Veteran

    Joined:
    Oct 23, 2013
    Location:
    Port-of-Spain, Trinidad & Tobago
    I myself have been trying to figure out the answers to those kinds of questions.

    Not understand what the nano kit is.

    I know the hybrid kit is supposed to replace the top cap / 510 thread of a .. I guess 22 mm female threaded tube like the nemesis.
    Sooner or later I'll probably do just what you did and just buy a bunch a pieces and hope they fit together.
     
  5. shroomalistic

    shroomalistic Senior Member ECF Veteran

    Joined:
    Apr 20, 2014
    Location:
    Palm Desert, California (Palm Springs Area)
    there ultra fire 18350 have 900 reviews and 4.4 stars and they are crap.

    Just read that some a HCigar versions and some are unknown versions.
     
  6. Dogeggs

    Dogeggs Super Member Verified Member ECF Veteran

    Joined:
    Jan 15, 2014
    Location:
    Southampton UK
    The one you ordered is one of the good ones, HCigar don't sell to fastech but they still have a very good supplier, all that stuff will fit no problem too.
     
  7. coaldriller

    coaldriller Bottom Feeder! Verified Member ECF Veteran

    Supporting member
    Joined:
    Jan 28, 2014
    Location:
    West Virginia
    Just remember...You get what you pay for..
     
  8. The Ministry

    The Ministry
    Moderator
    Verified Member ECF Veteran

    Supporting member
    Joined:
    Dec 27, 2013
    Location:
    Cramlington, Northumberland, UK
    I've got a Nemesis clone from FT and had very little issues with it. The switch sometimes works loose and starts to "stick" but it's a quick job to unscrew it and tighten the contact pin, and good as new. It looks ok, engraving is not as deep as the original - and the thing probably won't last as long as the real deal, but it works and it was cheap. Looks nice, too. Not tried any kits with it however. The threading is fine, not great, not bad. Overall, good for the money. As stated, you get what you pay for. It's functional and will tide me over until I can source and afford the real thing :)
     
Thread Status:
Not open for further replies.

Share This Page