"Official" Super-T Picture and comment thread!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
That sure appears to be a MAP tank on your Precise, and no gap from an extender so far as I can see in the photo.
What kind of adapter did you use there?
The map tank works fine on mine, both the P18,P16.
Shanburkhalter(I'm pretty sure that's how it's spelled)made a youtube vid on how to make a tank with a ce2 r4 and a syringe.
I have made a couple and they work too,for about 25$ less than a map tank,They just ain't as finished looking.
One of my homemade tanks holds about 15ml,the other about 5ml
View attachment 32895
Shanburkhalter(I'm pretty sure that's how it's spelled)made a youtube vid on how to make a tank with a ce2 r4 and a syringe.
I have made a couple and they work too,for about 25$ less than a map tank,They just ain't as finished looking.
One of my homemade tanks holds about 15ml,the other about 5ml
View attachment 32895
Last edited:
I love my Precise
Did you bring your Precise plural to a high polish yourself? Looks nice, but I would have them looking all scratched up in no time. Also where is that leather case from, was it purposely made for the precise?
the leather case, I bought it already, is to cigars, there are various sizes and colors
I put the P16 in a compartment,
in the compartment there are 2 x 16340 batteries and a bottle of 5 ml.
sorry but I do not speak English well, and I did not understand what you were asking me to polish
but, I polished them with cotton discs for grinding wheel over the counter,
but I think it is better to have it done to David,
I do it alone because I live in Italy and would be expensive to send David to polish
now I also bought the discs for satin, then so is scratching less
sorry for my English
No problem, I understood what you were saying, thanks. I was just commenting on how shiny they were and if mine were that shiny then I would scratch them up badly but they look very nice. Try copy and paste words into google translate, it is by no means great but it works ok. Thanks I will look for cigar cases on ebay. thanks
the leather case, I bought it already, is to cigars, there are various sizes and colors
I put the P16 in a compartment,
in the compartment there are 2 x 16340 batteries and a bottle of 5 ml.
sorry but I do not speak English well, and I did not understand what you were asking me to polish
but, I polished them with cotton discs for grinding wheel over the counter,
but I think it is better to have it done to David,
I do it alone because I live in Italy and would be expensive to send David to polish
now I also bought the discs for satin, then so is scratching less
sorry for my English
agnelli - i have the same cigar case to carry mine in. it is a perfect fit for a juice, battery, and of course the precise - if it could leave my hand long enough to go in there.
I have a quick question about that cigar case. Did it say which "ring gauge size" it was? I am looking at them and cigars have their own unit of measurement called ring gauge. junquedujour, if you got it online could you please link the website? Thanks
In cigars, ring gauges are measured in 64ths of an inch in diameter. For example, a 54 gauge case is 54/64 inches, 0.843 inches, or 22 mm. I have a 54 gauge case on order for my P18 and a Cigar Caddy 3140 also on order. I hope this conversion isn't confusing.
So can you tell us exactly what size would be iused for a p16 and a p10? I would greatly appreciate it!
From the Super T site:
Precise 10440: 12mm x 83mm
Precise 16340: 18.5mm x 74mm
Precise 18650: 20mm x 104mm
--------------------------------
P10:
12mm/25.4mm per inch = 0.47245 inch ~ 30/64th
13mm/25.4mm per inch = 0.51181 inch ~ 33/64th
P16:
19mm/25.4mm per inch = 0.74803 inch ~ 48/64th
P18:
20mm/25.4mm per inch = 0.78740 inch ~ 50/64th
21mm/25.4mm per inch = 0.82677 inch ~ 53/64th
-------------------------------
So, going on Frank's information ... looks to me like the Ring Gauges would be:
P10 - 31 RG
P16 - 48 RG
P18 - 52 RG
Or maybe I'm really confused. And, don't have any idea if those are common RG sizes, or not.
Precise 10440: 12mm x 83mm
Precise 16340: 18.5mm x 74mm
Precise 18650: 20mm x 104mm
--------------------------------
P10:
12mm/25.4mm per inch = 0.47245 inch ~ 30/64th
13mm/25.4mm per inch = 0.51181 inch ~ 33/64th
P16:
19mm/25.4mm per inch = 0.74803 inch ~ 48/64th
P18:
20mm/25.4mm per inch = 0.78740 inch ~ 50/64th
21mm/25.4mm per inch = 0.82677 inch ~ 53/64th
-------------------------------
So, going on Frank's information ... looks to me like the Ring Gauges would be:
P10 - 31 RG
P16 - 48 RG
P18 - 52 RG
Or maybe I'm really confused. And, don't have any idea if those are common RG sizes, or not.
- Status
Similar threads
