Official VAPE DOCTOR ECF Specials! Starter Kits | MODS | RBA/RDA | E-liquids | Drip Tips | & More! 2014

[SoulFresh]

The stainless steel Hammer mod Replica by hcigar features very nice deeply engraved laser etched logos on the mod’s body, button and top cap. The Hammer replica comes with 18500 and 18650 extension tubes to accomodate larger size batteries. The Hammer Replica will come in the box setup to use an 18350 battery. The Hammer mod was ergonomically designed to sit comfortably in and contour to your hand. The Hammer does feature a button locking mechanism so it will not autofire while in your pocket. The bottom portion of the Hammer clone has multiple holes drilled for battery ventilation. The Hammer mod clone comes equipped with a 510 atomizer connection which fits most atomizers.

Features:

1:1 True Mechancial Replica
316 High Quality Stainless Steel Body
Laser Etched Engravings and Logos
Silver-Plated Connections
Airholds on the Bottom for Battery Ventilation
Button with Locking Feature
510 Atomizer Connection
22mm Diameter Top Cap
Includes:
Stainless Steel Hammer Replica By HCigar
2x Extension body tubes to fit 18500 and 18650 batteries
HCigar Hammer Mod Carrying Box

The Hammer Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.

Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
AGA-T3 - The AGA-T3 is a genesis style rebuildable atomizer. It features a stainless steel housing with a pyrex glass tank. It has a tank capacity of approximately 1.5 mL. The unit is rebuildable using stainless steel mesh or ceramic wick.

Stainless Steel Housing
Pyrex Glass Tank
Approx. 1.5 mL capacity
510 Threading
eFest 18650 - These batteries outputs up to 30amps at 3.7 volts and hold 1600 mAh of capacity. This means you can have a safer vaping experience while running below 1 ohm's on your rebuildable atomizers. High drain batteries output much more power to delivery the extreme vapor production vaping enthusiasts demand.

Stainless Steel Drip Tip

Magneto/AGA-T3 Enthusiast Kit - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

Tank Tuesdays! Get 15% off Tanks today only! In store/online Coupon Code: TANKTUES

 

[SoulFresh]

Wicked Wednesdays! Get 15% off Atomizers today only! In store/online Coupon Code: WICKEDWED

 

[SoulFresh]

The stainless steel Hammer mod Replica by HCigar features very nice deeply engraved laser etched logos on the mod’s body, button and top cap. The Hammer replica comes with 18500 and 18650 extension tubes to accomodate larger size batteries. The Hammer Replica will come in the box setup to use an 18350 battery. The Hammer mod was ergonomically designed to sit comfortably in and contour to your hand. The Hammer does feature a button locking mechanism so it will not autofire while in your pocket. The bottom portion of the Hammer clone has multiple holes drilled for battery ventilation. The Hammer mod clone comes equipped with a 510 atomizer connection which fits most atomizers.

Features:

1:1 True Mechancial Replica
316 High Quality Stainless Steel Body
Laser Etched Engravings and Logos
Silver-Plated Connections
Airholds on the Bottom for Battery Ventilation
Button with Locking Feature
510 Atomizer Connection
22mm Diameter Top Cap
Includes:
Stainless Steel Hammer Replica By HCigar
2x Extension body tubes to fit 18500 and 18650 batteries
HCigar Hammer Mod Carrying Box

The Hammer Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.

Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
Comes with:
Smok Mangeto Mechanical Mod
Gift Box
Does not come with battery, charger, or atomizer

Smok Magneto Mechanical Mod - Telescoping Electronic Cigarette - Magnetic Switch - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

The Russian 91% is a RBA (rebuildable tank atomizer) made of 304 grade stainless steel with adjustable airflow and a bottom screw fill hole. Due to its design the Russian 91% atomizers produces very flavorful vapor. The Russian 91% is very similar to the Kayfun Lite & the parts can be interchanged with the Kayfun Lite. It features a 510 threading that is compatible with most devices that use the popular 510 connection. Also there is a 510 connection adaptor for driptips and a metal tank section to replace the plastic tank section on the Russian 91%. Please take note that the clear tank is susceptible to decomposition when filled with a highly acidic or corrosive eLiquid. Usually, eLiquids that are oil based (cinnamon, peppermint, clove, etc.) tend to cause problems for these products and should be avoided.



Features:

All high quality solid stainless steel 316
Underpressure DIY Atomizer
Flavorful Vapor
Air Control
Parts are Interchangable with the Kayfun Lite
510 connection to fit most devices
510 driptip adaptor
Bottom screw, fill hole
Adjustable 510 center pin
The Russian 91% includes:
The Russian 91% with airflow control
Clear Tank
Driptip Adaptor for all 510 driptips
Metal Tank Section "used to replace the clear tank section"
Package of Silica Wick
Package of Nichrome Wire
Package of replacement screw
2 x Spare part air flow screw
2 x Spare part wick holding screw
6 x Spare O-Rings
Multipupose mini screw driver
Gift box & instruction manual

Genuine Russian 91% - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

Thirsty Thursdays! Get 15% off Eliquids today only! In store/online Coupon Code: THIRSTYTHURS

 

[SoulFresh]

The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.

Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
IGO-T - From the same makers that brought you the IGO-L and IGO-W, the new IGO-T is an upgraded version of the popular IGO-W. It features the same 3 hole post for easy dual coil builds. The main feature of the new IGO-T is in the new Titanium Cap Design. It now has a narrow shaped cap design made specically for more flavor. The titanium cap reduces weight while increasing durability and style.
Rebuildable atomizers are for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick, kanthal wires, and extra o-rings. The RBA Atomizer is small, but produces an extreme amount of vapor depending on how you build them.

3 Hole Post - Easy to build dual coil build
Titanium Construction
Narrow Cap Design for Extra Flavor
Extreme Vapor Production
Comes with Kanthal, Silica Wick, and three screws
eFest 18650 - These batteries outputs up to 30amps at 3.7 volts and hold 1600 mAh of capacity. This means you can have a safer vaping experience while running below 1 ohm's on your rebuildable atomizers. High drain batteries output much more power to delivery the extreme vapor production vaping enthusiasts demand.

Stainless Steel Drip Tip

Magneto/IGO-T Enthusiast Kit - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

The AGA-T3 is a genesis style rebuildable atomizer. It features a stainless steel housing with a pyrex glass tank. It has a tank capacity of approximately 1.5 mL. The unit is rebuildable using stainless steel mesh or ceramic wick.

Stainless Steel Housing
Pyrex Glass Tank
Approx. 1.5 mL capacity
510 Threading

AGA-T3 Genesis Style Rebuildable Atomizer - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

Rebuildable dripping atomizer is for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick and kanthal wires, and extra o-rings. These RBA are small but produces an extreme amount of vapor depending on how you rebuild them.

Stainless Steel
Rebuildable Atomizer
Comes with Kanthal, Silica Wick, and three screws

IGO-W Rebuildable Dripping atomizer - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

Mechanical Mondays! Get 15% off Mechanical Mods today only! In store/online Coupon Code: MECHMON

 

[SoulFresh]

Tank Tuesdays! Get 15% off Tanks today only! In store/online Coupon Code: TANKTUES

 

[SoulFresh]

Wicked Wednesdays! Get 15% off Atomizers today only! In store/online Coupon Code : WICKEDWED

 

[SoulFresh]

Thirsty Thursdays! Get 15% off Eliquids today only! In store/online Coupon Code: THIRSTYTHURS

 

[SoulFresh]

This is the new V2 Patriot 1:1 Replica that is in full stainless steel quality. This new version features Much larger Diameter Holes in the 3 post design to allow for more extreme coil setups by using larger gauge wires. 22 gauge will fit easily into the post with this atomizer. Features Vented top cap for better heat dissipation, 22mm diameter to fit flush with your mod, and deep juice well for extreme vapor production and performance.
V2 features Larger Holes in Post for easier build setups
High grade stainless polished steel
2 Medical Grade O-rings Seal the Top Cap to the Body
Triple-post system for single/dual coil builds
Double o-ring seals on bottom base
Phillips Post Screws
22mm diameter
510 Thread Atomizer Connection
Deep Juice Well
Cooling Fins Located on the Top Cap for heat dissipation
Laser Engraved Logos
Free Drip tip

Patriot Atomizer 1:1 Replica 22MM Big Post Stainless Steel RDA Rebuildable - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

The new Stillare Dripper RBA 1:1 Replica features gold plated positive and negative post that gas stock post holes big enough for double 22 gauge wires. These gold plated posts give the best conductivity and anti-corrosive material. The atomizer comes with atomizer base and three piece design allows for easier building and dripping. The vented (slots) airflow along the sides allows smooth airflow and draw without the need to drill extra airholes. Complete stainless steel quality, flush finish and manufacturing make this one of the best replicas we tested thus far.

Gold Plated Tri-pole Design
Gold Plated Screws
Adjustable Air Holes Cyclops Style
22mm Configuration
Laser Engraved Cartel Logo
Drip Tip Included
510 Thread
Random Serial Number

Cartel Stillare V2 Dripper 1:1 Replica Rebuildable Mod Atomizer RBA RDA ATTY - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

Protank II 2 V2 - Glass Pyrex Tank BCC Clearomizere EVOD USA Kanger Quality

The new Protank 2 gives the same style and performance as the Kanger Protank (Bottom Coil Clearomizer) and now comes with a interchangeable 510 drip tip and reinforced brackets inside the tank!

This is a Vape Doctor Exclusive Item! This features the same materials, manufacturing, and quality as Kangertech without the logo. Which means you get the same protank 2 and performance at an affordable price!

The protank introduces a new Glass tank made of pyrex! It has a 510 threading connection to fit ego's and other similar devices that uses the 510 threading. It also comes with the ego thread adapter to secure the protank onto the unit more flushed and makes it look much more stylish.

The coil sits on the bottom of clearomizer allowing you to take advantage of gravity for the e-liquid to enter into the coil without having any wicking issues and dry hits.

Interchangeable 510 drip tip
Reinforced Brackets inside tank
Replaceable BBC atomizer heads
Glass Tank
Holds 3 ml of e-liquid.
Includes:

1 x Kanger Protank (Pyrex tank and 510 base)
1x 2.2 Ohm Coil
Black Gift Box

Protank II 2 V2 - Glass Pyrex Tank BCC Clearomizer EVOD USA Kanger Quality - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

This Brass Stingray is a 1:1 High Quality Replica of the Popular JD Tech Mechanical Mod. It features full brass with stainless steel lock ring and accents. This mod is completely flush with three piece body to fit 18350, 18490, and 18650 batteries. It features magnetic firing switch to allow smooth firing button with no springs. Brass body and high quality finish gives little to no voltage drop for extreme vapor production.

Features
- 22mm Diameter.
- Body and Extension Tubes - Polished "Phantom" Brass. Consists of Aluminium, Brass and Copper wihich improves Conductivity, Colour and Texture.
- Top Cap - Polished "Phantom" Brass with Stainless Steel Wrap.
- Bottom Cap - Polished "Phantom" Brass with Polished 304 Stainless Steel Lock Ring
- Lock Ring with 3 Entry Threading for One Locking Motion
- Can Accommodate 18350, 18490 and 18650 Batteries with Included Extension Tubes
- Silver Plated Copper Contacts
- Floating Positive Pin
- Adjustable Magnetic Firing Button and Contacts
- Fine (0.5mm) and Smooth Threading
- Low Voltage Loss

Brass Stingray 1:1 Replica Brass Mechanical Mod JD TECH USA - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!

 

[SoulFresh]

The main 18350 tube of the Turtle Ship V2 1:1 Replica features the signature UVO Korean laser etched engravings on both the front and back side. The Turtle Ship V2 is composed of 100% stainless steel and comes with a total of 3 battery tubes allowing you to easily change the length of your device and to accommodate an 18350, 18490 or 18650 batteries. It features silver-plated atomizer contact pin and a silver-plated bottom firing pin for ultimate conductivity. The white delrin ring on the Turtle Ship clone's button allows you to adjust the delrin piece upwards/downwards to eliminate any unwanted battery rattle inside the mod. The locking ring on this mod allow prevents unwanted firing when placing it in your pocket or setting it down on a table. It has a 510 atomizer connection which will fit most atomizers and is 22mm in diameter.



100% Stainless Steel Body
No Circuit Board (True Mechanical Mod)
Laser Etched Engravings and Logo
Silver Plated - Button Firing Pin
Silver Plated - Atomizer Contact Pin
Floating Atomizer Contact Pin
Adjustable Delrin Spacer to Eliminate Battery Rattle
Bottom Firing Button with Threaded Locking Ring
3 100% Stainless Steel Tubes for 18350, 18490, and 18650 Batteries
510 Atomizer Connection
22mm Diameter

Turtle Ship V2 Stainless Mod 1:1 Replica High Quality Mechanical Turtleship - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!