Mechanical Mondays! Get 15% off Mechanical mods today only! In store/online Coupon Code: MECHMON
http://www.vapedoctor.com/pv-mods/
Official VAPE DOCTOR ECF Specials! Starter Kits | MODS | RBA/RDA | E-liquids | Drip Tips | & More! 2014
- Thread starter SoulFresh
- Start date
- th_trl_thread_readers 0
- Status
Mechanical Mondays! Get 15% off Mechanical mods today only! In store/online Coupon Code: MECHMON
http://www.vapedoctor.com/pv-mods/
Quasar rda 1:1 Replica Rebuildable Dripping Atomizer Clone USA
The Quasar rda is an exact 1:1 Replica that features a three post design suitable for single, dual, or quad coil setups. The vented (slotted) air flow design and deep well allows for one of the smoothest and highest performance rebuildable dripping atomizer we have test so far. High quality stainless steel finish with 22mm Diameter in size to give your mechanical mod a quality setup!
Features
22mm diameter
Polished finish
Deep engravings and logo
Bell shaped inner top cap, intensifies flavor
High quality stainless steel construction
Airflow control sleeve with cyclops-style airholes
Tri-Post design
Comes with:
1 x Quasar RDA
1 x Quasar Gift Box
Quasar RDA 1:1 Replica Rebuildable Dripping Atomizer Clone USA - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
This is a high quality exact 1:1 Replica Hades Mechanical mod that will fit a 26650 Battery for extreme vapor production setups that are higher displacement batteries (higher AMPs). These mechanical mods features high quality stainless steel that comes in three colorways of polished stainless steel, full brass, or brushed stainless steel/brass lock ring setup.
1:1 Replica
316 Stainless Steel
28.5mm (Top Cap)
26650 Battery Only (not include)
Silver Plated Brass Contacts
Available in Polish stainless steel/ Full Brass/ Or Brushed stainless Steel and brass lock ring
Hades Replica Stainless Steel/Brass/Hybrid 26650 Mechanical Mod Vaporizer - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
The stainless steel Hammer mod Replica by HCigar features very nice deeply engraved laser etched logos on the mods body, button and top cap. The Hammer replica comes with 18500 and 18650 extension tubes to accomodate larger size batteries. The Hammer Replica will come in the box setup to use an 18350 battery. The Hammer mod was ergonomically designed to sit comfortably in and contour to your hand. The Hammer does feature a button locking mechanism so it will not autofire while in your pocket. The bottom portion of the Hammer clone has multiple holes drilled for battery ventilation. The Hammer mod clone comes equipped with a 510 atomizer connection which fits most atomizers.
Features:
1:1 True Mechancial Replica
316 High Quality Stainless Steel Body
Laser Etched Engravings and Logos
Silver-Plated Connections
Airholds on the Bottom for Battery Ventilation
Button with Locking Feature
510 Atomizer Connection
22mm Diameter Top Cap
Includes:
Stainless Steel Hammer Replica By HCigar
2x Extension body tubes to fit 18500 and 18650 batteries
HCigar Hammer Mod Carrying Box
The Hammer Mechanical Mod Replica - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
This is a 1:1 replica of the infamous TOBH Atomizer! It features a 303 Stainless Steel body with the negative posts welded to the 22mm base. It also has a solid bottom copper contact for optimized conductivity to your coils! The post holes are drilled to 0.05" to easily accommodate a wide variety of kanthal wire gauge sizes! Included in the package is also a stainless steel drip tip and mini screwdriver!
Features:
One-piece 303 Stainless Steel Body
22mm base
6 air flow holes
0.05" post hole size
Copper Bottom Contact
Includes:
TOBH Atty RDA Atomizer 1:1 Replica
Stainless Steel Drip Tip
Mini Screwdriver
Gift Box
TOBH Atty Rebuildable Dripping Atomizer RDA Replica - Stainless Steel Copper Contact - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
The new Stillare Dripper RBA 1:1 Replica features gold plated positive and negative post that gas stock post holes big enough for double 22 gauge wires. These gold plated posts give the best conductivity and anti-corrosive material. The atomizer comes with atomizer base and three piece design allows for easier building and dripping. The vented (slots) airflow along the sides allows smooth airflow and draw without the need to drill extra airholes. Complete stainless steel quality, flush finish and manufacturing make this one of the best replicas we tested thus far.
Gold Plated Tri-pole Design
Gold Plated Screws
Adjustable Air Holes Cyclops Style
22mm Configuration
Laser Engraved Cartel Logo
Drip Tip Included
510 Thread
Random Serial Number
Cartel Stillare V2 Dripper 1:1 Replica Rebuildable Mod Atomizer RBA RDA ATTY - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
Thirsty Thursdays! Get 15% off Eliquids today only! In store/online Coupon Code: THIRSTYTHURS
This Brass Stingray is a 1:1 High Quality Replica of the Popular JD Tech Mechanical Mod. It features full brass with stainless steel lock ring and accents. This mod is completely flush with three piece body to fit 18350, 18490, and 18650 batteries. It features magnetic firing switch to allow smooth firing button with no springs. Brass body and high quality finish gives little to no voltage drop for extreme vapor production.
Features
- 22mm Diameter.
- Body and Extension Tubes - Polished "Phantom" Brass. Consists of Aluminium, Brass and Copper wihich improves Conductivity, Colour and Texture.
- Top Cap - Polished "Phantom" Brass with Stainless Steel Wrap.
- Bottom Cap - Polished "Phantom" Brass with Polished 304 Stainless Steel Lock Ring
- Lock Ring with 3 Entry Threading for One Locking Motion
- Can Accommodate 18350, 18490 and 18650 Batteries with Included Extension Tubes
- Silver Plated Copper Contacts
- Floating Positive Pin
- Adjustable Magnetic Firing Button and Contacts
- Fine (0.5mm) and Smooth Threading
- Low Voltage Loss
Brass Stingray 1:1 Replica Brass Mechanical Mod JD TECH USA - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
The new 2014 LG batteries have landed here at Vape Doctor! These HIGH DRAINING 18650 batteries have a 35 amp Max discharge rate! With such outstanding discharge rates these batteries will compliment sub-ohm setups very well! They hold 2500mAh of power and are high drain batteries, meaning they can handle sub-ohm safety without having to worry if your battery will give out before your mechanical mod does!
IN-STOCK AND READY TO SHIP!
You Get: GENIUNE LG HE2 HIGH DRAIN LI-ON BATTERY
Specifications:
Typical Capacity: 2500mAh
Nominal Voltage: 3.6V
Cut off Voltage : 2.5V
Continuous maximum charge current:4A
Continuous maximum discharge current: 20A
Maximum discharge current: 35A
LG HE2 3.7V 2500MAH HIGH DRAIN 35A 18650 LI-ON BATTERY - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
These High quality High drain, 30 AMP batteries are just what the doctor ordered when it comes to sub-ohm setups for high performance vaporizers! They hold 2600mAh of power and are high drain batteries, meaning they can handle sub-ohm safety without having to worry if your battery will give out before your mechanical mod does!
IN STOCK AND READY TO SHIP!
You Get: 18650 Genuine Sony VTC5 High Drain Li-On batteries. These batteries are rated to 30a discharge and are perfect for sub-ohm builds
SONY VTC5 3.7V US18650VTC5 2600mah HIGH DRAIN 30A Li-on Battery - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
This is the new V2 Patriot 1:1 Replica that is in full stainless steel quality. This new version features Much larger Diameter Holes in the 3 post design to allow for more extreme coil setups by using larger gauge wires. 22 gauge will fit easily into the post with this atomizer. Features Vented top cap for better heat dissipation, 22mm diameter to fit flush with your mod, and deep juice well for extreme vapor production and performance.
V2 features Larger Holes in Post for easier build setups
High grade stainless polished steel
2 Medical Grade O-rings Seal the Top Cap to the Body
Triple-post system for single/dual coil builds
Double o-ring seals on bottom base
Phillips Post Screws
22mm diameter
510 Thread Atomizer Connection
Deep Juice Well
Cooling Fins Located on the Top Cap for heat dissipation
Laser Engraved Logos
Free Drip tip
Patriot Atomizer 1:1 Replica 22MM Big Post Stainless Steel RDA Rebuildable - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
This is a high quality exact 1:1 Replica Hades Mechanical mod that will fit a 26650 Battery for extreme vapor production setups that are higher displacement batteries (higher AMPs). These mechanical mods features high quality stainless steel that comes in three colorways of polished stainless steel, full brass, or brushed stainless steel/brass lock ring setup.
1:1 Replica
316 Stainless Steel
28.5mm (Top Cap)
26650 Battery Only (not include)
Silver Plated Brass Contacts
Available in Polish stainless steel/ Full Brass/ Or Brushed stainless Steel and brass lock ring
Genuine MNKE IMR 26650 4000mAh LiMN 3.7v Rechargeable Lithium Battery
MNKE IMR 26650 4000mAh Li-MN 3.7v rechargeable lithium battery. These batteries have excellent high drainging amperage for those intense subohm cloud setups. They also have extra long battery life that lasts all day!
Safe chemistry LiMN 3.7V rechargeable battery does not require protection circuit. These cells can handle high amperage and are safe to use in series / multi-cell applications. Can be charged with any Li-ion battery charger with 4.2V output.
Brand Name: MNKE
Size: 26650
Model: MNKE 26650H
Type: Li-Mn (High Drain)
Rated Capacity: 4000mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Amp: 20Amp
Amp busrt: 60Amp
Dimensions: 26.3mmX65.5mm
Rechargable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Orange
Hades 26650 Replica Enthusiast Kit - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
The Quasar RDA is an exact 1:1 Replica that features a three post design suitable for single, dual, or quad coil setups. The vented (slotted) air flow design and deep well allows for one of the smoothest and highest performance rebuildable dripping atomizer we have test so far. High quality stainless steel finish with 22mm Diameter in size to give your mechanical mod a quality setup!
Features
22mm diameter
Polished finish
Deep engravings and logo
Bell shaped inner top cap, intensifies flavor
High quality stainless steel construction
Airflow control sleeve with cyclops-style airholes
Tri-Post design
Comes with:
1 x Quasar RDA
1 x Quasar Gift Box
Quasar RDA 1:1 Replica Rebuildable Dripping Atomizer Clone USA - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
Cartel Stillare V2 Dripper 1:1 Replica Rebuildable Mod Atomizer RBA RDA ATTY
The new Stillare Dripper RBA 1:1 Replica features gold plated positive and negative post that gas stock post holes big enough for double 22 gauge wires. These gold plated posts give the best conductivity and anti-corrosive material. The atomizer comes with atomizer base and three piece design allows for easier building and dripping. The vented (slots) airflow along the sides allows smooth airflow and draw without the need to drill extra airholes. Complete stainless steel quality, flush finish and manufacturing make this one of the best replicas we tested thus far.
Gold Plated Tri-pole Design
Gold Plated Screws
Adjustable Air Holes Cyclops Style
22mm Configuration
Laser Engraved Cartel Logo
Drip Tip Included
510 Thread
Cartel Stillare V2 Dripper 1:1 Replica Rebuildable Mod Atomizer RBA RDA ATTY - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
Thirsty Thursdays! Get 15% off Eliquids today only! In store/online Coupon Code: THIRSTYTHURS
E-Liquid - Vape Doctor
The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.
Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
IGO-W Rebuildable Dripping atomizer - Rebuildable dripping atomizer is for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick and kanthal wires, and extra o-rings. These RBA are small but produces an extreme amount of vapor depending on how you rebuild them.
Stainless Steel
Rebuildable Atomizer
Comes with Kanthal, Silica Wick, and three screws
eFest 18650 - These batteries outputs up to 30amps at 3.7 volts and hold 1600 mAh of capacity. This means you can have a safer vaping experience while running below 1 ohm's on your rebuildable atomizers. High drain batteries output much more power to delivery the extreme vapor production vaping enthusiasts demand.
Stainless Steel Drip Tip
Magneto/IGO-W Enthusiast Kit - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.
Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
IGO-T - From the same makers that brought you the IGO-L and IGO-W, the new IGO-T is an upgraded version of the popular IGO-W. It features the same 3 hole post for easy dual coil builds. The main feature of the new IGO-T is in the new Titanium Cap Design. It now has a narrow shaped cap design made specically for more flavor. The titanium cap reduces weight while increasing durability and style.
Rebuildable atomizers are for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick, kanthal wires, and extra o-rings. The RBA Atomizer is small, but produces an extreme amount of vapor depending on how you build them.
3 Hole Post - Easy to build dual coil build
Titanium Construction
Narrow Cap Design for Extra Flavor
Extreme Vapor Production
Comes with Kanthal, Silica Wick, and three screws
eFest 18650 - These batteries outputs up to 30amps at 3.7 volts and hold 1600 mAh of capacity. This means you can have a safer vaping experience while running below 1 ohm's on your rebuildable atomizers. High drain batteries output much more power to delivery the extreme vapor production vaping enthusiasts demand.
Stainless Steel Drip Tip
Magneto/IGO-T Enthusiast Kit - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
Protank II 2 V2 - Glass Pyrex Tank BCC Clearomizere EVOD USA Kanger Quality
The new Protank 2 gives the same style and performance as the Kanger Protank (Bottom Coil Clearomizer) and now comes with a interchangeable 510 drip tip and reinforced brackets inside the tank!
This is a Vape Doctor Exclusive Item! This features the same materials, manufacturing, and quality as Kangertech without the logo. Which means you get the same protank 2 and performance at an affordable price!
The protank introduces a new Glass tank made of pyrex! It has a 510 threading connection to fit ego's and other similar devices that uses the 510 threading. It also comes with the ego thread adapter to secure the protank onto the unit more flushed and makes it look much more stylish.
The coil sits on the bottom of clearomizer allowing you to take advantage of gravity for the e-liquid to enter into the coil without having any wicking issues and dry hits.
Interchangeable 510 drip tip
Reinforced Brackets inside tank
Replaceable BBC atomizer heads
Glass Tank
Holds 3 ml of e-liquid.
Includes:
1 x Kanger Protank (Pyrex tank and 510 base)
1x 2.2 Ohm Coil
Black Gift Box
Protank II 2 V2 - Glass Pyrex Tank BCC Clearomizer EVOD USA Kanger Quality - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
Brass Stingray 1:1 Replica Brass Mechanical Mod JD TECH USA
This Brass Stingray is a 1:1 High Quality Replica of the Popular JD Tech Mechanical Mod. It features full brass with stainless steel lock ring and accents. This mod is completely flush with three piece body to fit 18350, 18490, and 18650 batteries. It features magnetic firing switch to allow smooth firing button with no springs. Brass body and high quality finish gives little to no voltage drop for extreme vapor production.
Features
- 22mm Diameter.
- Body and Extension Tubes - Polished "Phantom" Brass. Consists of Aluminium, Brass and Copper wihich improves Conductivity, Colour and Texture.
- Top Cap - Polished "Phantom" Brass with Stainless Steel Wrap.
- Bottom Cap - Polished "Phantom" Brass with Polished 304 Stainless Steel Lock Ring
- Lock Ring with 3 Entry Threading for One Locking Motion
- Can Accommodate 18350, 18490 and 18650 Batteries with Included Extension Tubes
- Silver Plated Copper Contacts
- Floating Positive Pin
- Adjustable Magnetic Firing Button and Contacts
- Fine (0.5mm) and Smooth Threading
- Low Voltage Loss
Brass Stingray 1:1 Replica Brass Mechanical Mod JD TECH USA - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
The main 18350 tube of the Turtle Ship V2 1:1 Replica features the signature UVO Korean laser etched engravings on both the front and back side. The Turtle Ship V2 is composed of 100% stainless steel and comes with a total of 3 battery tubes allowing you to easily change the length of your device and to accommodate an 18350, 18490 or 18650 batteries. It features silver-plated atomizer contact pin and a silver-plated bottom firing pin for ultimate conductivity. The white delrin ring on the Turtle Ship clone's button allows you to adjust the delrin piece upwards/downwards to eliminate any unwanted battery rattle inside the mod. The locking ring on this mod allow prevents unwanted firing when placing it in your pocket or setting it down on a table. It has a 510 atomizer connection which will fit most atomizers and is 22mm in diameter.
100% Stainless Steel Body
No Circuit Board (True Mechanical Mod)
Laser Etched Engravings and Logo
Silver Plated - Button Firing Pin
Silver Plated - Atomizer Contact Pin
Floating Atomizer Contact Pin
Adjustable Delrin Spacer to Eliminate Battery Rattle
Bottom Firing Button with Threaded Locking Ring
3 100% Stainless Steel Tubes for 18350, 18490, and 18650 Batteries
510 Atomizer Connection
22mm Diameter
Turtle Ship V2 Stainless Mod 1:1 Replica High Quality Mechanical Turtleship - Vape Doctor
Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
- Status
Similar threads
- Locked
- Locked
- Locked
- Locked