rhelton

Vaping Master
ECF Veteran
Verified Member
Aug 15, 2014
4,161
15,514
spokane, wa
Testing a new istick 200TC -
51igPSZ.png


The gremlin I am using (and my griffin as well) don't thread down flush (should have watched/read more reviews on this and the RX200S I guess) so I grabbed some neoprene washers to fit under them until I can order some mod guards from kidneypuncher.

Y1di9l3.png
I dont understand why these things happen. A quality 510 is very inexpensive at about $4 US retail for a Varitube or a Fat Daddy. Considering they are made in China to begin with it is pretty crap that all mods do not have one.
 

cocy c

Ultra Member
ECF Veteran
Nov 24, 2015
1,150
10,099
Do you get all lingering flavors out of your tanks and o-rings that way? I tried boiling for the first time the other day and even that didn't do the job on some of my tanks. I only tried it shortly though, I think longer boil times are needed for the more stubborn flavors and smells.

Thanks for sharing
24639996112_5365340198_o.gif
Plumbers use a grease that stop the taste of the rubber on the o rings in the water and seal's it to. So just a dot of it will do a O.ring.it is not toxic.I have it and use it on my o ring's and i do not think i get a lingering flavour's. It is pricey and hard to get but you can use Vaseline to seal the o ring and stop in picking up the strong flavour but just a dot is all you need . There are lot of o ring grease so look for a water one in a small white or clear tube with just a little in it.Hop it helps.The o ring's last a lot longer to.
 
Last edited:

KayP

Vaping Master
ECF Veteran
Dec 21, 2015
3,363
5,944
Gold Coast, QLD, AUS
I dont understand why these things happen. A quality 510 is very inexpensive at about $4 US retail for a Varitube or a Fat Daddy. Considering they are made in China to begin with it is pretty crap that all mods do not have one.
The more you buy, the more the better for the seller. Be it even because the product was not built to last. JMO.

Sent from my SM-G900I using Tapatalk
 

Txaggiesaunt

Ultra Member
ECF Veteran
Verified Member
Mar 16, 2013
1,255
1,086
Texas

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,947
Taxachusetts
Aromamizer V1/V2 frankentank on Disrupter Curve 75TC
2200mah lasts me under 3 hours @ 700 watts! oh, 70.0 watts
$30 locally from a reviewer that was done with it
I'll try a monstah build in that Axiom but it has a tiny deck, deck I said
Disrupter will need some 3300mah batts if it's gonna try to hang with the big boyz

13698224_1809622065935282_8170093624901693990_o.jpg
 

rhelton

Vaping Master
ECF Veteran
Verified Member
Aug 15, 2014
4,161
15,514
spokane, wa
Aromamizer V1/V2 frankentank on Disrupter Curve 75TC
2200mah lasts me under 3 hours @ 700 watts! oh, 70.0 watts
$30 locally from a reviewer that was done with it
I'll try a monstah build in that Axiom but it has a tiny deck, deck I said
Disrupter will need some 3300mah batts if it's gonna try to hang with the big boyz

13698224_1809622065935282_8170093624901693990_o.jpg
I have a Cortex that I use only with the Innokin tank that came with it. At 30w or so it will last all day. You get it up in the 50w range or more and it will kill the battery pretty quick. Overall the new Innokin devices are pretty nice I think.
 

CrayCrayRay

Senior Member
ECF Veteran
Verified Member
Jul 14, 2016
140
553
45
This is my favorite mini combo after rigorous (not rigorous) and extensive (not extensive) testing.

.35 ohm at 32w. lasted me 6 hours out and about today. Still had juice when I tossed it on the charger.

There is a mod protector in between the atty and the mod.

Fits in the small change pocket of my jeans.

20160724_234549_zpsp8vhozxv.jpg

20160724_234712_zpsidwyjlae.jpg
 
Last edited:

KayP

Vaping Master
ECF Veteran
Dec 21, 2015
3,363
5,944
Gold Coast, QLD, AUS
Aromamizer V1/V2 frankentank on Disrupter Curve 75TC
2200mah lasts me under 3 hours @ 700 watts! oh, 70.0 watts
$30 locally from a reviewer that was done with it
I'll try a monstah build in that Axiom but it has a tiny deck, deck I said
Disrupter will need some 3300mah batts if it's gonna try to hang with the big boyz

13698224_1809622065935282_8170093624901693990_o.jpg
Frankentank?? Where can get those?

Nice gear BTW.

Sent from my SM-G900I using Tapatalk
 

KayP

Vaping Master
ECF Veteran
Dec 21, 2015
3,363
5,944
Gold Coast, QLD, AUS
This is my favorite mini combo after rigorous (not rigorous) and extensive (not extensive) testing.

.35 ohm at 32w. lasted me 6 hours out and about today. Still had juice when I tossed it on the charger.

There is a mod protector in between the atty and the mod.

Fits in the small change pocket of my jeans.

20160724_234549_zpsp8vhozxv.jpg

20160724_234712_zpsidwyjlae.jpg
That's it buddy, make that postie burn them calories. Your micro setup looks good.

Sent from my SM-G900I using Tapatalk
 

OhTheAgony

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2011
1,583
3,426
Netherlands
Plumbers use a grease that stop the taste of the rubber on the o rings in the water and seal's it to. So just a dot of it will do a O.ring.it is not toxic.I have it and use it on my o ring's and i do not think i get a lingering flavour's. It is pricey and hard to get but you can use Vaseline to seal the o ring and stop in picking up the strong flavour but just a dot is all you need . There are lot of o ring grease so look for a water one in a small white or clear tube with just a little in it.Hop it helps.The o ring's last a lot longer to.

Thanks for the tip, but it seems easier to just dedicate certain tanks to certain flavors, & maybe get some more o-rings just in case, haha.
 

KTMRider

Vaping Master
ECF Veteran
Verified Member
Jul 5, 2014
4,538
18,078
NJ
  • Deleted by retired1
  • Reason: Off topic

rhelton

Vaping Master
ECF Veteran
Verified Member
Aug 15, 2014
4,161
15,514
spokane, wa

somdcomputerguy

vaper dedicato
ECF Veteran
Verified Member
Contest Winner!
    Got a couple silicone sleeves for my travelers from ebay. I know this guy makes like a 400% markup on these but I wanted a few quick until I can place an order from FT for a dozen for $10:
    I got some of those from FT for a iStick 60W. About $2 a pair, so I got a few.. I gave one set to a buddy, I use another pair, mostly the green one though, and the other pair is still wrapped up..
     

    Users who are viewing this thread