- Status
Had a little play time last week
Sent from my LGMS550 using Tapatalk
Fat coils
Here are a couple more fat 3 wrap single coils that I've done, vaped and enjoyed, they're all a very similar vape, they have lots of flavour but will quickly get your atty hot if you like to take lots of pulls
View attachment 614237 View attachment 614239
Wow, those are works of art!
Sent from my iPhone using Tapatalk
A little color shot....
Sent from my LGMS550 using Tapatalk
Pretty coil....
F-Up set-up / Ugly build!!!!!
What is the best way to get even and stright stagard spaces? Ive been struggling with that.
Sent from my LGMS550 using Tapatalk
Little 6ply/28g stagg.
My first parallel build. Used the Coil Master. 8 wraps with 26G Kanthal and 25mm diameter. 0.24 Ohm and Fiber Freaks pre cut. Wicking so good that I can't run my Wismec Noisy Cricked II in parallel mode as that floods the wicks. The tank is the Ijoy Limitless Plus. Cut the wicks aligned with the top of the glass.
The coils aren't as dark as in the picture.
The coils aren't as dark as in the picture.
Last edited:
I need longer post screw's on my goon post to fit hefty duals. Any suggestions on size and length of screws to buy?
Sent from my KFFOWI using Tapatalk
Sent from my KFFOWI using Tapatalk
Any tricks for pulling off those parallels?
Little 6ply/28g stagg.
If anyone has a good trick for some simple Clapton's I'd love to hear that as well. I was trying the bic pen trick but haven't had much success.
Nothing big just simple practice build.
Sent from my LGMS550 using Tapatalk
8ply, 27g.
Sent from my LGMS550 using Tapatalk
- Status
Similar threads
