Protank and Aerotank ohm ranges

[ChelsB]

I rebuild my coils and want to know how low or high I can go. I am unable to find information on the acceptable ohm limit/range for protanks and Aerotanks. I know stock coils come in 1.8, 2.2 and 2.5. Does this mean the limit is 1.8-2.5 or is there a broader range?

 

[Falco78]

For my protank I a year ago or so built several at 1 ohm and went to a lowest of .8 with no issues

sent from my Galaxy Note 4 using MOAR 2.1b ROM running tapatalk

 

[dragoi90]

As i used my protank years ago i used to make the coild over 1 ohm.The flavour was awesome and the vapor was medium(50/50)!As i recal below 1 ohm the vape was hot and the flavour meh!Just my opinion though!

Sent from my A0001 using Tapatalk

 

[backitdown]

ChelsB- You are in the sweet spot with those ohms. A few folks pushed them as low as .1 ohm but not real many. Did you ever acquire one of the PT airflow control valves ?
My standard for years was 30ga at 1.8 mm I.D. dia. 6/5 wraps

 

[ChelsB]

ChelsB- You are in the sweet spot with those ohms. A few folks pushed them as low as .1 ohm but not real many. Did you ever acquire one of the PT airflow control valves ?
My standard for years was 30ga at 1.8 mm I.D. dia. 6/5 wraps

Yes, I grabbed a couple of them!
Thanks for commenting![emoji4]