I have used small attys for so long and now i am looking to try a larger one, question is for anyone who has tried the SINGLE COIL IGO. I realize it only cost $8.00 (good test price) but does she leak and does the top cap stay in place fairly well, build quality looks decent for eight dollars. May try a dual coil down the road but right now i rock 24mg and on rare occasions I'll hit the 36mg juice. Thank you ALL for the help!
Question on the IGO atty.
- Thread starter Swamper
- Start date
- th_trl_thread_readers 0
- Status
Are you asking about the IGO-W single coil cap, on Robs site? 8$ gets you the cap, you still need to buy the attie for the deck.
If so, I am running single coils in a couple of IGO atties and use this cap or the plastic one with one hole blocked. The only time I've had any leaks is from over squonking. The cap is snug enough with two O-rings, but some drip tips don't sit really tight, a little bit of floss under the o-ring snugs the drip tips up really well. I also punch the hole out to 1/16" on these caps.
If so, I am running single coils in a couple of IGO atties and use this cap or the plastic one with one hole blocked. The only time I've had any leaks is from over squonking. The cap is snug enough with two O-rings, but some drip tips don't sit really tight, a little bit of floss under the o-ring snugs the drip tips up really well. I also punch the hole out to 1/16" on these caps.
They're fine old atty's.
Very easy to build on and the top has never been a problem for me.
They do need the air hole enlarged (for my taste) though.
Very easy to build on and the top has never been a problem for me.
They do need the air hole enlarged (for my taste) though.
I got an Igo S from Rob's site long ago and I love it. (Don't know if yours is an S or W). I'm a small atty lover same size as the RM2. No problem with leaks. Sitting on top of my SL LP Grand right now. I did drill the air hole out some though.
- Status
Similar threads
