RBA on iTaste MVP?

Discussion in 'Rebuildable Atomizer Systems' started by treyalexjohn, Dec 11, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. treyalexjohn

    treyalexjohn Full Member

    Joined:
    Dec 5, 2013
    Location:
    Houma, La
    Hey guys, I'm looking at getting something like a RSST or similar for my MVP. Has anyone tried it? Or can anyone give any recommendations on which RBA to use on a VV/VW mod like an MVP?
     
  2. Jazzi Mike

    Jazzi Mike Ultra Member Verified Member ECF Veteran

    Joined:
    Jun 3, 2013
    Location:
    Michigan
    You can use any and all RBAs on the MVP. I don't know who started the sorely mistaken fallacy that RBAs=Mech. Personally, I always had really good luck with the Kayfun Lite. Nowadays, there are tons of clones of this atomizer that make it more affordable. It is not much more complicated than a dripper.

    A dripper is the simplest place to start, but some people don't care for them. An igo is a good place to start, but again there are many inexpensive clones out there as well.

    As far as the RSST goes, it is the best beginner genesis atomizer. However, building it with an SS mesh wick is by no means easy. It is definitely more difficult than other stuff.
     
  3. Buddychuck

    Buddychuck Full Member

    Joined:
    Apr 8, 2013
    Location:
    Dallas TX
    I have the MVP and use a RSST and Igo-L on it daily. Just build your coils for 1.5 and up and you will have no issues.
     
  4. treyalexjohn

    treyalexjohn Full Member

    Joined:
    Dec 5, 2013
    Location:
    Houma, La
    Thanks for the replies guys. I'll look into RBA's and drippers. And I'll definitely remember 1.5 ohm and up. I'm running a 1.9 with a protank and its working wonders until the tank decides to start gurgling again.
     
  5. DasBluCig

    DasBluCig Ultra Member Verified Member ECF Veteran

    Supporting member
    Joined:
    Jul 30, 2013
    Location:
    Chichester, NH
    Another happy IGO-L user here!!:D They work great with the MVP v2....
    Using several for different juices...1.7-2.0 ohms....micro coils from 30ga. kanthal on a 1/16" arbor...cotton wicks....
    Lovin' my vapes!!:)
    Happy (vaping) Trails!
     
  6. rehardy88

    rehardy88 Full Member

    Joined:
    Nov 2, 2013
    Location:
    Salem, VA
    I currently use the igo-w on mine (just prefer the looks) but as others have said basically all RBA's will work as long as you do not exceed the amp limit of the MVP.
     
  7. silber

    silber Senior Member ECF Veteran

    Joined:
    Jul 29, 2013
    Location:
    Seattle, WA, USA
    I've had the best experiences running kayfun-like atomizers on (my girlfriend's) MVP2. The kayfun lite/kayfun lite plus/russian/russian clone in particular, because they're a bit shorter.
     
  8. singu

    singu Super Member ECF Veteran

    Joined:
    Nov 1, 2011
    Location:
    Croatia-Zagreb
    I opened a thread about MVP and RBAs not long ago and i got some good advice. I ended up ordering Cobra atomizer and iAtty from Fasttech.
     
  9. treyalexjohn

    treyalexjohn Full Member

    Joined:
    Dec 5, 2013
    Location:
    Houma, La
    Yeah I've been looking into the kayfun lites. They're just so expensive and I don't know if I want to go with a clone or the real thing. Decisions decisions.
     
  10. suspectK

    suspectK Vaping Master Verified Member ECF Veteran

    Joined:
    Aug 7, 2013
    Location:
    somewherez
    I use an igow, agi, and the mvp is the only thing I have that looks good with the kayfun lite, nice flush look. Kfl feels like it weighs more than the mvp..lol.
     
Thread Status:
Not open for further replies.

Share This Page