RDA Round-Table Discussion and Lookout

[MMW]

A parallel squonker? I didn't realize there was such a beast. Nice.

I've always wondered why there aren't parallel mech squonkers. I'd buy one.
::::creeps back to the shadows of lurk:::

 

[Tagi]

There are. Catfish, bf mod, pinches. And there was a guy overseas but hes no longer available for US sales.

Not a huge selection but they are out there

Sent from my SM-G920V using Tapatalk

 

[eLicky]

I have not but eager to hear your thoughts on it. Looks like I might like it if it has wide open airflow.

I will pop back after it arrives, let you know.

I really the design.

 

[Khanninnarh]

How does eveyone like the goon lp. What kind of builds are people putting in it?

Tried this build. Simple SS316L 2.5mm at 60watts. Temp control at 440F. Airflow goes beneath the coils with enough clearance to not hit the metal top cap.

Flavor is nice with the airflow closed up to the width of the coils.

Drop the big build guys. Simple is the way to go.



Sent from my iPhone using Tapatalk

 

[Visualabstrakt]

Tried this build. Simple SS316L 2.5mm at 60watts. Temp control at 440F. Airflow goes beneath the coils with enough clearance to not hit the metal top cap.

Flavor is nice with the airflow closed up to the width of the coils.

Drop the big build guys. Simple is the way to go.



Sent from my iPhone using Tapatalk

Nice. Im gonna have to try a 2.5mm coil. Thank you for sharing

 

[MMW]

There are. Catfish, bf mod, pinches. And there was a guy overseas but hes no longer available for US sales.

Not a huge selection but they are out there

Sent from my SM-G920V using Tapatalk

Thanks!

 

[Tagi]

No problem, the Custom Classic BF Mods and PDIB Pinches are pricey but very nice. I also forgot about T-Mod.

Catfish is building a list for a tres equis modified to a dual parallel squonker.

 

[MMW]

No problem, the Custom Classic BF Mods and PDIB Pinches are pricey but very nice. I also forgot about T-Mod.

Catfish is building a list for a tres equis modified to a dual parallel squonker.

The Tres has a great form factor for it for sure. I'll have to look into that.

 

[muzichead]

Catfish is building a list for a tres equis modified to a dual parallel squonker.

Hopefully it won't be a leaker like the last one he modified for BF...

 

[RickCain]

Tried this build. Simple SS316L 2.5mm at 60watts. Temp control at 440F. Airflow goes beneath the coils with enough clearance to not hit the metal top cap.

Flavor is nice with the airflow closed up to the width of the coils.

Sent from my iPhone using Tapatalk

Lift up those coils as they most likely are below the air holes and you should get even better flavor.

This does like BIG builds but find 3mm coils with 24g SS works real nice.

 

[Khanninnarh]

Lift up those coils as they most likely are below the air holes and you should get even better flavor.

This does like BIG builds but find 3mm coils with 24g SS works real nice.

Lifted. So through the holes I see the bottom half of the coils. Can't go any higher as it will hit the top of the cap.

Also might melt some O ring [emoji81]

PS: The original Goon 24 outer ring fits the Goon LP build deck.

EDIT: Best to vape in TC mode.


Sent from my iPhone using Tapatalk

 

[jhhollier]

***KRYTEN PSA***
:Specs:
-24mm Dual Coil RDA
-Stainless Steel Construction with Peek Insulators
-Dual Adjustable Air Flow
-Unique 2 Post Coil Clamping System
-Bottom Feeder Ready (BF pin included)
-2 Delrin Drip Tips Included - Standard & Wide Bore
-Accessories Available
-Caps: Ultem, Delrin, Acrylic
-Drip Tip: Ultem (Standard & Wide Bore)

:reLAUNCH DATES:
Jan. 27 - Feb. 9 : *EXCLUSIVE* reLaunch only @ www.psyclonemods.com (undetermined set amount)
Feb. 10 - Feb. 16 : U.S. Retail reLaunch (U.S. online and local B&M's)
Feb. 17 : International reLaunch

PRICING:
RRP - $75.50

 

[jhhollier]

Any tried the Kilted? It's basically the RDA mode of the Raven's Moon RTA at a significantly lower price. It's made by Envii but I think the Ravens Moon guy is involved.

 

[Khanninnarh]

***KRYTEN PSA***
:Specs:
-24mm Dual Coil RDA
-Stainless Steel Construction with Peek Insulators
-Dual Adjustable Air Flow
-Unique 2 Post Coil Clamping System
-Bottom Feeder Ready (BF pin included)
-2 Delrin Drip Tips Included - Standard & Wide Bore
-Accessories Available
-Caps: Ultem, Delrin, Acrylic
-Drip Tip: Ultem (Standard & Wide Bore)

:reLAUNCH DATES:
Jan. 27 - Feb. 9 : *EXCLUSIVE* reLaunch only @ www.psyclonemods.com (undetermined set amount)
Feb. 10 - Feb. 16 : U.S. Retail reLaunch (U.S. online and local B&M's)
Feb. 17 : International reLaunch

PRICING:
RRP - $75.50

Can't wait to see the build deck.


Sent from my iPhone using Tapatalk

 

[Hank F. Spankman]

I'd really like to get my grubby mitts on a Skill RDA

 

[eLicky]

I ordered an Alliance Big Boy V2 28.5mm today, pretty excited considering the extra's you get. I have a new iJoy Maxo mod coming as well I'm going to pair it with.

 

[MrNobody]

Anyone else keep quitting vaping and keep coming back? I think I lasted maybe 4 months this time, third time coming back to it. Picked up another Kennedy and figured I would give squonking a go, ordered the hadaly and the Lost Vape DNA 75 Squonker. I've been able to quit other things before but vaping is always something I just keep crawling back to.

 

[muzichead]

I'm hoping its one and done for me!! Only been a week, but so far so good...

 

[Hank F. Spankman]

I have a Yeti RDA on the way. Haven't seen much on them. Looks like it could be an under-the-radar winner

 

[eLicky]

Time to have some fun.