1. Take part in the #WeAreVapor campaign

    Dear Guest, 

    The  #WeAreVapor campaign has just launched and needs your help. This is a massive push to get vapers and vapor businesses visible, and make Congress aware of the Cole-Bishop amendment. It is being organised by the Vapor Technology Association. 

    Please take a minute of your time to take a look at the site to see how you can get involved. 

    Thanks!

    Dismiss Notice

Rebuilding halo coils

Discussion in 'New Members Forum' started by Rowan Tree Builders, Aug 21, 2013.

Tags:
Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Rowan Tree Builders

    Rowan Tree Builders Full Member

    Jul 25, 2013
    Sidney, ME, US
    I was just wondering if anyone had any advice on rebuilding coils for my Triton tank. Like what size wire, maybe the best place to order wicks and what material and so on. Any help would be greatly apreciated.
     
  2. hey, i have been doing this now for that past two days and got it down like a pro man. how can i help?
     
  3. i use for everything i rebuild 32g kanthal wire and 2mm silica wick
     
  4. Rowan Tree Builders

    Rowan Tree Builders Full Member

    Jul 25, 2013
    Sidney, ME, US
    Alright any tips on wrapping the coils around the wicks to get the best vape production
     
  5. Rowan Tree Builders

    Rowan Tree Builders Full Member

    Jul 25, 2013
    Sidney, ME, US
    Im also using a regular battery not a variable voltage so what size wire produces the hottest and most vaper
     
  6. think they can all work the same depending on the ohms you set it to..i usually do a 5/4 wrap with the 32 guage kanthal and its between 1.5-2.0 ohms which would should vape great on your 3.7 volt battery
     
  7. if your looking for the warm vapor then you need the top coil clearomizer tank which it sounds like you do cause the triton is a top coil which gives warm vapor...bottom coils, like the kanger protank deliver vapor that isnt warm
     
Thread Status:
Not open for further replies.

Share This Page