Reo compatible RBAs

Discussion in 'Reos Mods' started by hildicat, Feb 5, 2013.

  1. hildicat

    hildicat Ultra Member Verified Member

    Thought it might be helpful to list all of the RBAs that can be used with our Reos.

    Please help me fill this list as I'm sure to forget something. And if you know of anything on the horizon please let us all know about it.

    This is what I know of so far...

    REOmizer
    Chalice
    ERA
    Hornet
    A7/A7 Mini
    Surface


    Anything else out there?

    [TABLE="class: grid, width: 600"]
    [TR]
    [TD]Atty[/TD]
    [TD]Air Intake[/TD]
    [TD]Grand/VVG[/TD]
    [TD]Reo Mini[/TD]
    [TD]Mini 2.0 -18940[/TD]
    [TD]Mini 2.1-18490[/TD]
    [TD]VV Woodvil[/TD]
    [TD]Woodvil 18490[/TD]
    [TD]Reo Woodvil[/TD]
    [/TR]
    [TR]
    [TD]REOmizer[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Chalice[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]ERA[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Hornet[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]A7 *[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]A7 Mini *[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Surface[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Cerbero[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]mcARB[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Achilles[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [/TR]
    [TR]
    [TD]Vision Eternity[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]eBaron Dripper Spiral[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Cal-H BF[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [/TR]
    [TR]
    [TD]Killer 705[/TD]
    [TD]Bottom[/TD]
    [TD]x[/TD]
    [TD]x[/TD]
    [TD]x[/TD]
    [TD]x[/TD]
    [TD]Fits most[/TD]
    [TD]Fits most[/TD]
    [TD]Fits most[/TD]
    [/TR]
    [TR]
    [TD]BF Cyclone[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Reomizer 2 (RM2)[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD]not without modification[/TD]
    [TD]not without modification[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Aero BF RBA[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [/TABLE]
    Edit from RF: If you have a link to any other Bottom Fed Reo friendly RBA that isn't represented here, please message me so I can update the list.
    * A7 & A7 Mini warning: See http://www.e-cigarette-forum.com/forum/reos-mods/401265-dealing-a7.html for more information.
     
  2. FeistyAlice

    FeistyAlice ECF Guru Verified Member

    Vision Eternity.... fit's all aluminum REO CCs I have and most of the Brass CCs on Woodvils. I haven't tried firing them in most other than larger REOs. (it has been reported that although an RBA might fit it doesn't mean it will fire)
     
  3. Mudflap

    Mudflap Vaping Master Verified Member

    SMOKTech has cloned the ERA. I haven't bought one nor do I plan to, but it's out there.

    SMOKTech RDA Rebuildable Atomizer

    Edit: I don't even know if it's compatible with bottom feeders.
     
  4. Gioajack

    Gioajack Ultra Member Verified Member

    The specs sat sealed connector and the air hole in the top cap is actually below the top o-ring. (Not sure what that's supposed to do.) Probably won't be long before they come out with a BF model.

    The screwless connectors might be pretty nice... if they work.


    Jack
     
  5. Norman Clature

    Norman Clature Super Member Verified Member

  6. nerak

    nerak ECF Guru Verified Member

    Can you divide these as what REO they will fit? Some people only have the smaller REO's and it would help.

    Thanks!
     
  7. super_X_drifter

    super_X_drifter OG Micro Coiler Verified Member

    Supporting member
    Great thread Hildicat. Yes the improvement suggested by Karen would certainly tighten it up.


    Shot thru cyberspace with my iGun
     
  8. LongHaul

    LongHaul Howdy Y'All Verified Member

    Supporting member
    Imeo is makina the Achilles and its going to be a rebuildable that goes on preorder next month. I know it fits the Grand. And you should add the fatty to your list
     
  9. pmoraldo

    pmoraldo REO Guru Verified Member

    Supporting member
    I didn't think the fatty came in and bottom fed version :confused:

    Sent while Hyper Vapin a Trippy Tipped Reo
     
  10. hildicat

    hildicat Ultra Member Verified Member

    I need some help with confirming exactly which RBA fits which Reo as I only have the Grand and VVG to test with.

    Also, the atty names are linked to their individual product pages...



    [TABLE="class: grid, width: 512"]
    [TR]
    [TD]Atty[/TD]
    [TD]Air Intake[/TD]
    [TD]Grand/VVG[/TD]
    [TD]Mini[/TD]
    [TD]18940[/TD]
    [TD]Woods[/TD]
    [/TR]
    [TR]
    [TD]REOmizer[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Chalice[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]ERA[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Hornet[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X
    [/TD]
    [TD]X
    [/TD]
    [/TR]
    [TR]
    [TD]A7[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]A7 Mini[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]Surface[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X
    [/TD]
    [TD]X
    [/TD]
    [/TR]
    [TR]
    [TD]Cerbero[/TD]
    [TD]Side[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]mcARB[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X
    [/TD]
    [TD]X
    [/TD]
    [/TR]
    [TR]
    [TD]Achilles[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD]X[/TD]
    [TD]X
    [/TD]
    [TD]X
    [/TD]
    [/TR]
    [TR]
    [TD]Vision Eternity[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [TR]
    [TD]eBaron Dripper Spiral[/TD]
    [TD]Bottom[/TD]
    [TD]X[/TD]
    [TD][/TD]
    [TD][/TD]
    [TD][/TD]
    [/TR]
    [/TABLE]
     
  11. Whodoo

    Whodoo Senior Member Verified Member

    Has anyone tried the eBaron Dripper Special on a VV Grand?

    I have the Reomizer plus an ERA on the way. The eBaron looks super cool.
     
  12. nerak

    nerak ECF Guru Verified Member

    WOW! You went through quite a lot to do that!!! Wonderful!!!

    You did a spectacular job!
     
  13. nerak

    nerak ECF Guru Verified Member

    I know the Reomizer and A7 will fit some of the wood REO's. It all depends on the catch cup size.
     
  14. Stratified

    Stratified Senior Member Verified Member

    When i saw this this morning I was like "I wish I had links to all of these so I could look them up." Lo and behold . . .

    Awesome, thanks a bundle for this thread.
     
  15. super_X_drifter

    super_X_drifter OG Micro Coiler Verified Member

    Supporting member
    Hildicat, you are the man. Thank you.


    Shot thru cyberspace with my iGun
     
  16. CATastrophe

    CATastrophe Ultra Member

    Hildicat, great chart! Just what we needed. I also like how you included the airhole location. Everything right there at a glance. :toast:

    I'm still hemming and hawing about which one for my minis and this makes for a nice easy comparison.


    I think it ought to be stickied!
     
  17. hildicat

    hildicat Ultra Member Verified Member

    I have, and so far I am unimpressed. It works, but is mostly gurgly, at least for me. But you can blind-squonk it. Keep in mind that I really didn't care for the A7 either. I think it has more to do with the air intake style than anything else. The more I try these, the more convinced I am that I prefer the side air intake.
     
  18. hildicat

    hildicat Ultra Member Verified Member

    Glad it worked out. Had a tough time trying to figure how to add a table on this forum. If anyone can add more info to the chart like specific Reo models and what fits what, I will gladly update it.

    Also, if you can post any new atty updates to this thread I will add them to the existing chart as well so we can keep a neat list.
     
  19. Whodoo

    Whodoo Senior Member Verified Member


    Excellent feedback Hildicat. And thank you for putting this spreadsheet together. I'm shopping for rba's blindly this week & this will help. I'm probably partial to a side air hole too, but still very new to all this. My only issue thus far with the side hole is when I lay the vv grand on its side, and a little juice comes out the hole after a long while. So far though, that's my only gripe. It is cool to plug the side hole with a finger and suck juice into the rba, as opposed to pushing the plastic bottle really hard.
     
  20. pianoguy

    pianoguy Vaping Master Verified Member

    Supporting member
    Excellent! I would give his effort two thumbs-up, a gold star and an atta-boy! ;-)
     

Share This Page