The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Reoville Vape Mail

Discussion in 'Reos Mods' started by Spydro, Aug 31, 2017.

Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. WharfRat1976

    WharfRat1976 Vaping Master Verified Member ECF Veteran

    May 31, 2014
    Austin, Texas
    So the Entheon kind of a roided up Hadaly?

    How is the leak factor?
     
  2. SteamStack

    SteamStack Ultra Member Verified Member ECF Veteran

    Aug 7, 2014
    Macomb, MI, USA
    So far, good! Just for a be careful not to over squonk it. That's the only time I've noticed a leak durring squanking.
     
  3. Rayonati Sloth

    Rayonati Sloth Vaping Master Verified Member ECF Veteran

    Jun 25, 2014
    Adirondacks
    I had my first drop of juice come out of the Entheon today. Actually, more like 2 drops. So I gave it a good ol' heavy squonk then immediately put it in a saddle bag on my bike without taking a vape. The saddlebag is fastened up near the handlebars so the mod theoretically stays vertical. It never fully does though. With my Hadaly I had leaks most of the time while riding because as I ride, and the bike bumps around, the mod wiggles within the saddle bag some, and leans forward a lot of the time. This is especially pronounced on trails where some tricks are often merited which more or less tips my whole bike forward or backward.

    So with the Entheon though, so far it has only leaked at all if I purposefully test it by heavily squonking prior to putting it in the saddlebag. Also, the bag itself came loose on the post today and was leaning forward more than normal. That's when I stopped to check and yes there were 2 drops of liquid out one airhole.

    It's damn near leak proof.
     
    • Like Like x 3
  4. MsLoud

    MsLoud Ultra Member Verified Member ECF Veteran

    I keep my P67 in my front right Jean pocket so it sits in a reclined position with the drip tip end poking out a bit. Never a leak but then again, I always vape enough not to have much sitting in the well to cause a leak.

    Sent from my 5049W using Tapatalk
     
    • Like Like x 1
  5. MsLoud

    MsLoud Ultra Member Verified Member ECF Veteran

    Pretty sure I got the last one they will make in the yellow. Seems there is a QC issue with the paint process. Of course I went ahead and got both the slotted and solid door potions

    Gimmie a few and I'll get some pics. It's stunning!

    Sent from my 5049W using Tapatalk
     
    • Like Like x 4
  6. MsLoud

    MsLoud Ultra Member Verified Member ECF Veteran

    The 2 together are how they will roll for a while.
    [​IMG][​IMG][​IMG]

    Sent from my 5049W using Tapatalk
     
    • Like Like x 8
    • Love Love x 2
  7. SteamStack

    SteamStack Ultra Member Verified Member ECF Veteran

    Aug 7, 2014
    Macomb, MI, USA
    Sweet!
     
    • Like Like x 1
  8. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    Tracking shows that four (4) packages were delivered to my mail place today. It's not quite the witching hour here yet, so it will probably be 3-4 hours before I go pick them up.

    I have some other goodies up my sleeve, but it'll be 2-3 weeks yet before they are available to buy.
     
    • Like Like x 2
  9. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    Vape Mail picked up in the wee hours this morning. Have had builds in the two on the Pico's for a couple of hours trying them out.

    L to R: SXK Solo 22mm single coil BF RDA (couldn't find an authentic Dee Mods) w/a 4mm RxW build; Goon V1.5 has no build yet; Oumier 22mm single coil Wasp Nano BF RDA w/a 4mm RxW build (currently has an added on Delrin wide bore D/T on it as well). I'm liking both the Solo and the Wasp better than the Hadaly's already on the Pico Squeeze mods that I use for my errand runs... the flavor is great and these won't be leaker's. The Solo has a restricted draw like the Hadaly's, but I could fix that way easier on it than I could on the Hadaly's. Or I'll just go back to the Sperpent BF running dual coils that I had on it, or can put the Pulse BF 22 on it.

    vm20171002s6.jpg
     
    • Like Like x 6
  10. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    Finally put a monster dual build in the Goon V1.5 this morning. Have it on a 2015 Woodvil since I still have no interest in fiddling around with the firing issues the CCM P67 has. I already like it WAY better than the Goon LP that I have never really liked at all. So I think I'll just retire the Goon LP... I simply don't want to deal with any problematic gear anymore.
     
  11. Vapefiend

    Vapefiend Super Member Verified Member ECF Veteran

    Dec 24, 2015
    Connecticut
    Hello p67
     

    Attached Files:

    • Like Like x 7
  12. SteamStack

    SteamStack Ultra Member Verified Member ECF Veteran

    Aug 7, 2014
    Macomb, MI, USA
    Seriously bad @$$!!!
     
    • Like Like x 1
  13. Vapefiend

    Vapefiend Super Member Verified Member ECF Veteran

    Dec 24, 2015
    Connecticut
    Yesterday I welcomed the Reactor to my collection. :)
     

    Attached Files:

    • Like Like x 3
  14. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    spygratsreo.jpg
     
    • Like Like x 2
  15. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    Have a couple more BF ready RDA's coming for the Reos... another Mesh RDA and another Goon V1.5.

    I also placed my first order with Eric and Cindy at Reosmods... for a bunch more spare P67 Reo parts.
     
    • Like Like x 3
  16. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    I picked up the two new BF RDA's at my mail place... a gold version of the Vandy Vape Mesh RDA and a gold version of the Goon V1.5 that both come with squonk pins. (The wayward package from Reosmods didn't show up when it was suppose to, so is still lost somewhere in Postal LA LA Land).

    Now that I have them in hand, I'm not sure if both or even if either of them will go Reos. I had planned to put them on two of my 2015 Mech Woodvil's for matchy-matchy combos (the Quilted Maple and the Claw White Oak). But I'm not a huge fan of those Woodvil's anymore, and I really do want at least one Mesh RDA on one of the TC Mods for super sub ohm builds that create serious flavor white outs. This gold Mesh RDA with a black chuff DT is a perfect match for my Gold Carbon Fiber Sig 213 dual series batt preheat TC mod (that currently was stored with a gold edition Merlin RTA on it). The Gold Goon matches it perfect too, so I may just put that mod back into service and rotate all three of these 'Goldies' on that mod instead... or also bring back my GunMetal Carbon Fibre Sig 213 for the other goid RDA that would also be a nice black/gold combo. I don't mind dripping them instead of squonking them. I will build them and run them for awhile before deciding which mods they will be dedicated to.

    vm171014-8.jpg

    An old picture of the Sig's (with Serpent 25 RTA's on them that I didn't like, so usually ran Avocado 24's on them instead).

    sigs-sm25s.jpg
     
    • Like Like x 2
  17. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    This sure didn't take long before my original thoughts were abandoned. For the quality of vapes I wanted out of these RDA's I was more interested in bringing the Sig's back into service than the 2015 Woodvil's. A surprise of sorts to someone who hobby crafted fine exotic woods for most of his life. But the P67's have ruined the Woodvil's for me and I've mostly lost interest in them except for Calamity Jane (although I seldom vape her now days).

    Have very low sub ohm builds in both, Ni80 mesh in the VVM and dual Aliens in the Goon running at fairly high watts. Two of my favorite DIY's are liking the massive flavor rich clouds from them just fine. Si I guess it's back to dripping sometimes in the dark world I live in.

    Just a quickie picture (since it's not of Reos).
    SigGold6.jpg
     
    • Like Like x 1
  18. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    Finally picked up the package from Reosmods that the post office delayed for some reason (it was shipped the same day I ordered). Bought $80 plus worth of additional spare parts, all of it for the P67's. Already have a large stash on hand of P67 spare parts, and have never used any of them. But this is cheap extra insurance that the five P67's will stay in top form to the end of my trail.

    I'm way more than good to go with the Reos, so this ought to be my last vape mail from Reosmods.
     
    • Like Like x 1

Share This Page