Hoping for some help here. Recently I got this Lavatube clone. Did some research and really not much found on it. Problem is I had some issues with the center post and tried all the repair tricks i know. After about a day messing with it I decided to change the wires from the pcb to the 510 connector using some wire from a USB cable that some mod makers rave about. Broke the original rubber grommet on the underside of the cap and had to use a grommet from a old blu cig carto i had laying around. Wired and soldered back up seemed to be working fine till i tried to put an atty to it. Minute I get it halfway threaded on the connector it shorts the unit and resets back to 5v and wont fire. Did I screw up the 510 connector somehow? Any tips or knowledge would greatly help out as this is the only APV I have right now and am on a limited budget. Though I do have a Sig #3 coming in sometime this week. Thanks in Advance.