Silly questio time, coppervape parts plus cc body

[ThaFuzz]

So, looking at the coppervape bf mod, and the custom classic, i dig that the bottle and battery go in from the same side on the cc. I really like the fixed juice tube on the coppervape. Does any body have both and care to experiment with whether or not you can use the fixed tube assembly from the cvbf on the cc?and if so, pics, and how hard it was to do. I don't own a cc (probably wont unless one comes up in the classies at a steep discount, no offense meant to corey, im sure they're good, but that price is waaay outside my budget) or maybe corey will see this and make a new version with fixed bottle....

 

[smknomore]

Interested here as well.

 

[BobC]

!
Yes, I would be so excited seeing the Pinto like Coppervape parts integrated on my BMW of squonk mods, CC,

Great idea!

NOT!

Do either of you own a CC?

 

[zoiDman]

 

[BobC]

Hey pal, not a 'Fanboy' of any mod, just prefer quality & performance over 'clones'

 

[herb]

Clones (really top notch ones) have been said to be every bit as good as the original item for a lot less money but we are not talking about clones when it comes to the Coppervape.

For the money spent , no mod even comes remotely close to the quality and performance of the CV , to think much more expensive mods provide a superior vape is inaccurate .

Use whatever you want but continuing to dis mods that cost less money than many grossly overpriced originals will never fly.

It's all good .

 

[KentA]

Hey pal, not a 'Fanboy' of any mod, just prefer quality & performance over 'clones'

Those are nice mods, BobC. An original Coppervape would supplement your collection nicely.

 

[benley73]

Ive got two of these now pretty fantastic mods to be honest and cheap 22£ for full kit 2£ for v2 button kit dam worth it , the first mod i got does have a bit of play in the fire button but v2 kit installed on it makes it now perfect no wobble , funny why it wobbled , since both look an fit exactly the same maybe a faulty part

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Desire Yuri RDA , does not come with bf 510 pin , but can easily take a 2.5mm bf pin to convert this little RDA into a sqounker atty , its a great cheap little RDA the Air intake can be set to dual for dual builds or single for single coil builds , so pretty versatile for a rda that 11£ an not a clone ,comes with ss top cap and 510 resin drip , or the delrin chuff top cap style

,

Sent from my ONEPLUS A3003 using Tapatalk
The bf pin was bought from Mod makers uk ,which converts this little 22mm atty into a versatile atty , solid built compact ,
This little golden pin in last pic is the original pin for Yuri none bf , which is 2.5mm wide ,

 

[Highwayman1224]

Love guy's like BobC who bash clones because they "think" authentic mods are superior to all clones.....LMAO!! I've got expensive authentic mods, but I've also got clones that I guarantee perform just as well as his precious authentics......

 

[KentA]

Love guy's like BobC who bash clones because they "think" authentic mods are superior to all clones.....LMAO!! I've got expensive authentic mods, but I've also got clones that I guarantee perform just as well as his precious authentics......

...and although the Coppervape's exterior resembles several previous squonkers, it's guts imitate no other. This is not a clone.

 

[Highwayman1224]

...and although the Coppervape's exterior resembles several previous squonkers, it's guts imitate no other. This is not a clone.

Don't let BobC see this.....

 

[benley73]

Well I have just ordered these not cheap but really struggling to find longer bf pins for converting my other atties , i would lime a linger pin to convert my Kennedy rda and my Virus RDA into bottom feed since both have the screw /hole come through bottom of the deck but my 10mm bf pins i bought are just not long enough , so hoping ....these in pic .....
Will suit the rda,s better , and allow me to convert many more RDA,s for the perfect sqounker conversion , meaning many Clones will be more suited , I dont care if there Cloned RDA,s or not

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Only 2 more sets left in stock seems tjere is longer suitable pins out there but needs imported from states or there ridiculous amount of dollars ,i found some 20mm ones but at 103usd out of my price range for a screw ,but you do get 25 an could sell them on ,others are 12£ each So maybe some one else could help in the search for them ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[zoiDman]

Well I have just ordered these not cheap but really struggling to find longer bf pins for converting my other atties , i would lime a linger pin to convert my Kennedy rda and my Virus RDA into bottom feed since both have the screw /hole come through bottom of the deck but my 10mm bf pins i bought are just not long enough , so hoping ....these in pic .....
Will suit the rda,s better , and allow me to convert many more RDA,s for the perfect sqounker conversion , meaning many Clones will be more suited , I dont care if there Cloned RDA,s or not

Sent from my ONEPLUS A3003 using Tapatalk

Just a Heads Up on those Vent Screws.

I believe that the ISO Standard for the Head Diameter of a M2.5 Cap Screw is 4.32mm to 4.68mm. So they should work as a BF Pin.

But...

The Head Diameter of a M3.0 Cap Screw is 5.32mm to 5.68mm. So if you want to use one of these Vent Screws, and the Head Diameter follows ISO Standards for Cap Screws, you're going to have to Reduce the Head Diameter for it to work as a 510 BF Pin.

Not Exactly an Insurmountable Task. LOL. But something someone looking for a 3mm BF Pin should Consider.

 

[benley73]

Thats fine i currently use the m2.5 0.45 ,. 10mm long as it is works well these are the same just longer 16mm , i do have some m3 10mm but like you say needs the head trimmed down a little ,hence why I got tbe m2.5 sizes since i know it works well

Sent from my ONEPLUS A3003 using Tapatalk

 

[zoiDman]

Thats fine i currently use the m2.5 0.45 ,. 10mm long as it is works well these are the same just longer 16mm , i do have some m3 10mm but like you say needs the head trimmed down a little ,hence why I got tbe m2.5 sizes since i know it works well

Sent from my ONEPLUS A3003 using Tapatalk

Just throwing it Out There for GP Knowledge.

 

[crunchie812]

Well I have just ordered these not cheap but really struggling to find longer bf pins for converting my other atties , i would lime a linger pin to convert my Kennedy rda and my Virus RDA into bottom feed since both have the screw /hole come through bottom of the deck but my 10mm bf pins i bought are just not long enough , so hoping ....these in pic .....
Will suit the rda,s better , and allow me to convert many more RDA,s for the perfect sqounker conversion , meaning many Clones will be more suited , I dont care if there Cloned RDA,s or not

Sent from my ONEPLUS A3003 using Tapatalk

FatDaddyVapes has the 2.5 & 3.0 vented screws for $3.99 per 3 pack. I've use the 2.5 to convert a few Stumpy clones. Needed to cut to length and trim the head length with a rotary tool cut off wheel but works perfectly. Or you can simply use the cut off wheel to cut a slot about half way through down the length of the screw and across the top and bottom. I have done it both ways and they work equally well. The slot method works on the pin in Derringers as well. I have a Derringer from REO and it works as well, but no better than the slotted one. The hole in the center may be more aesthetically pleasing, but the juice don't care.

 

[benley73]

FatDaddyVapes has the 2.5 & 3.0 vented screws for $3.99 per 3 pack. I've use the 2.5 to convert a few Stumpy clones. Needed to cut to length and trim the head length with a rotary tool cut off wheel but works perfectly. Or you can simply use the cut off wheel to cut a slot about half way through down the length of the screw and across the top and bottom. I have done it both ways and they work equally well. The slot method works on the pin in Derringers as well. I have a Derringer from REO and it works as well, but no better than the slotted one. The hole in the center may be more aesthetically pleasing, but the juice don't care.

How long are they i have some from mod makers uk there only 10mm long same ones they sell all fat daddy stuff on the same site m2.5 m3 but only 10mm like i say i need 12mm on some and more on others , so this is why i have Ordered the linger 16mm sizes , other wise id use the ones i already have ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[crunchie812]

How long are they i have some from mod makers uk there only 10mm long same ones they sell all fat daddy stuff on the same site m2.5 m3 but only 10mm like i say i need 12mm on some and more on others , so this is why i have Ordered the linger 16mm sizes , other wise id use the ones i already have ,

Sent from my ONEPLUS A3003 using Tapatalk

The M2.5 are 11.5mm and the M3 are 11mm. Overall length I'd guess.