eleaf istick Pico TC75W Kit in Silver
The Eleaf iStick Pico is tiny, but powerful. This latest kit from eleaf pairs the iStick Pico, a Variable Wattage and Temperature Control mod, with the Melo 3 Mini sub ohm clearomizer.
In Variable Wattage mode, the Eleaf iStick Pico has a 75 watt maximum output. In temperature mode, the mod allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200), Titanium (Ti), and Stainless Steel (SS316) wires. You can also dial in a custom TCR (Temperature Coefficient of Resistance) setting. If you enjoy using rebuildable atomizers on mechanical mods, you can set the iStick Pico to Bypass mode to harness the full voltage output of your battery.
The iStick Pico does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery (not included), so you can quickly swap out a drained battery for a freshly charged one as needed! The battery is easily accessible by unscrewing the protruding cap on top of the iStick Pico. Venting holes on the bottom of the mod ensure proper heat dissipation. You can charge your battery separately with an appropriate charger, or take advantage of on-board charging, by plugging the included Micro USB charge cable into the USB port on the side of the device and then into a computer.
Much like its name suggests, the iStick Pico is tiny, with ergonomic features like rounded edges and a no-slip matte surface. The Pico has a spring-loaded 510 connection pin, an easy-to-read OLED screen, a large firing button on the side, and recessed adjustment buttons on the bottom. Because the iStick Pico is firmware upgradeable, it means this tiny beast of a mod will remain relevant in your collection for a long time. The Pico is feature-rich, user-friendly, and has all standard protections.
The included Eleaf Melo 3 Mini atomizer features changeable coil heads, a pyrex glass tank, hidden adjustable airflow, and top-filling mechanism. Melo coils use 100% organic cotton for pure flavor. The Melo 3 Mini is capable of producing huge clouds of vapor, without compromising flavor.
The Eleaf iStick Pico kit is extremely versatile and it has a lot to offer to both intermediate and veteran vapers. If you are looking for huge clouds, great flavor and tiny form factor, give the iStick Pico a try!
The Eleaf iStick Pico Kit Includes:
1 x iStick Pico mod (High Drain Battery not included - use the Make it a Kit menu to grab some at a discount)
1 x Melo 3 Mini Atomizer (pre-installed with 0.3 ohm kanthal EC coil / use in Wattage mode only, 30-80W range)
1 x extra kanthal EC coil (0.5 ohm / use in Wattage mode only, 30-100W range)
1 x Micro USB charge cable
4 x Spare seal rings
1 x iStick Pico User Manual
1 x Melo 3 Mini User Manual
1 x Nice display box to keep in when not in use
Click here to view a full list of features.
The Eleaf iStick Pico is tiny, but powerful. This latest kit from eleaf pairs the iStick Pico, a Variable Wattage and Temperature Control mod, with the Melo 3 Mini sub ohm clearomizer.
In Variable Wattage mode, the Eleaf iStick Pico has a 75 watt maximum output. In temperature mode, the mod allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200), Titanium (Ti), and Stainless Steel (SS316) wires. You can also dial in a custom TCR (Temperature Coefficient of Resistance) setting. If you enjoy using rebuildable atomizers on mechanical mods, you can set the iStick Pico to Bypass mode to harness the full voltage output of your battery.
The iStick Pico does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery (not included), so you can quickly swap out a drained battery for a freshly charged one as needed! The battery is easily accessible by unscrewing the protruding cap on top of the iStick Pico. Venting holes on the bottom of the mod ensure proper heat dissipation. You can charge your battery separately with an appropriate charger, or take advantage of on-board charging, by plugging the included Micro USB charge cable into the USB port on the side of the device and then into a computer.
Much like its name suggests, the iStick Pico is tiny, with ergonomic features like rounded edges and a no-slip matte surface. The Pico has a spring-loaded 510 connection pin, an easy-to-read OLED screen, a large firing button on the side, and recessed adjustment buttons on the bottom. Because the iStick Pico is firmware upgradeable, it means this tiny beast of a mod will remain relevant in your collection for a long time. The Pico is feature-rich, user-friendly, and has all standard protections.
The included Eleaf Melo 3 Mini atomizer features changeable coil heads, a pyrex glass tank, hidden adjustable airflow, and top-filling mechanism. Melo coils use 100% organic cotton for pure flavor. The Melo 3 Mini is capable of producing huge clouds of vapor, without compromising flavor.
The Eleaf iStick Pico kit is extremely versatile and it has a lot to offer to both intermediate and veteran vapers. If you are looking for huge clouds, great flavor and tiny form factor, give the iStick Pico a try!
The Eleaf iStick Pico Kit Includes:
1 x iStick Pico mod (High Drain Battery not included - use the Make it a Kit menu to grab some at a discount)
1 x Melo 3 Mini Atomizer (pre-installed with 0.3 ohm kanthal EC coil / use in Wattage mode only, 30-80W range)
1 x extra kanthal EC coil (0.5 ohm / use in Wattage mode only, 30-100W range)
1 x Micro USB charge cable
4 x Spare seal rings
1 x iStick Pico User Manual
1 x Melo 3 Mini User Manual
1 x Nice display box to keep in when not in use
Click here to view a full list of features.
