Replacement Sub Ohm Coil Head for smok VCT Pro
These replacement heads are intended for use with the new VCT Pro Sub Ohm Clearomizer by SmokTech. Please note these coils will NOT work in other VCT clearomizers like the VCT A1 or the VCT X2. These E2-core sub ohm coils yield great flavor and excellent vapor production. They feature a vertical dual coils and use organic cotton. They are special because they have large, rectangular liquid intake holes that can keep up with high VG e-juice without a problem.
Changing the coil is easy: simply unscrew the base of the VCT Pro, unscrew the old coil and screw in a new one. To fill the VCT Pro, remove the base, tilt at a slight angle and fill with 5 ml of e-liquid (be careful not to get any e-liquid down the center tube.) Screw the base back on and allow a few minutes for the e-liquid to saturate the coil. Please make sure to prime a new coil by dripping a few drops of e-liquid onto the exposed cotton on the coil. If the coil is not properly saturated, it may burn.
PLEASE NOTE: Please only use these sub ohm coils with devices capable of handling sub ohm coils. If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 20W or higher. NEVER use sub ohm coils on an eGo battery or a device unequipped to support sub ohm coils. It is for your safety!
To ensure that the coil heads are thoroughly saturated and do not burn, we highly recommend dripping a few drops of e-liquid onto the exposed cotton on the sides of the coil head before using, as well as setting the tank aside for a few moments after filling with e-liquid.
Price is for a single piece.
Recommended wattage range
0.6 ohm: 30W - 80W
These replacement heads are intended for use with the new VCT Pro Sub Ohm Clearomizer by SmokTech. Please note these coils will NOT work in other VCT clearomizers like the VCT A1 or the VCT X2. These E2-core sub ohm coils yield great flavor and excellent vapor production. They feature a vertical dual coils and use organic cotton. They are special because they have large, rectangular liquid intake holes that can keep up with high VG e-juice without a problem.
Changing the coil is easy: simply unscrew the base of the VCT Pro, unscrew the old coil and screw in a new one. To fill the VCT Pro, remove the base, tilt at a slight angle and fill with 5 ml of e-liquid (be careful not to get any e-liquid down the center tube.) Screw the base back on and allow a few minutes for the e-liquid to saturate the coil. Please make sure to prime a new coil by dripping a few drops of e-liquid onto the exposed cotton on the coil. If the coil is not properly saturated, it may burn.
PLEASE NOTE: Please only use these sub ohm coils with devices capable of handling sub ohm coils. If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use High Drain batteries in a device capable of putting out 20W or higher. NEVER use sub ohm coils on an eGo battery or a device unequipped to support sub ohm coils. It is for your safety!
To ensure that the coil heads are thoroughly saturated and do not burn, we highly recommend dripping a few drops of e-liquid onto the exposed cotton on the sides of the coil head before using, as well as setting the tank aside for a few moments after filling with e-liquid.
Price is for a single piece.
Recommended wattage range
0.6 ohm: 30W - 80W
