Yihi SXmini Q Class Device
The SXmini Q Class mod by YiHi features a dual battery configuration with the new SX450J processor which provides big power output and intelligent power regulation. The new SX450J chip includes support for temperature limiting when using Ni200 or Titanium and Stainless Steel coils and the chip also has options for setting up specific temperature variable settings for special wire types.
The device is made from a zinc alloy (frame) and aluminium side panels with durable powder coating in your choice of colour. The Q-Class is 5 grams lighter than the ML-Class and a lot lighter than you would expect from a dual battery SXmini. The stainless steel atomiser platform is bevelled to 22mm to look great with many of the tanks on the market today and features a self-adjusting 510 centre post for a good connection with your tank.
The unit has in-case 2A balanced USB charging capability, so there's no need to remove your batteries, and it can also be used while charging.
We strongly recommend purchasing a pair of new AW IMR 18650 3000mAh or Efest IMR 18650 3000mAh cells to use in this device and "marry" them for life. The cells will need to be kept in a pair and discharged and charged at the same rate throughout their life or poor performance may result.
Features:
- Authentic SX450J processor board inside
- Joule mode: 10J-120J (212°- 572° F/ 100°- 300° C)
- Variable temperature with Ni200, Ti, Stainless, or custom settings
- 200W capability (ensure your batteries are suitable)
- Battery compartment for 2x18650 IMR battery (batteries not included)
- Removable side panels held in place with magnets
- Self-adjusting floating 22mm 510 atomiser connection
- Output Voltage 1.0 - 9.5V
- Resistance range 0.05 - 1.0 Ω (Joule mode)
- Resistance range 0.05 - 3.0 Ω (Power mode)
- Five modes: Powerful, Powerful+, Standard, Soft, Eco (plus memory for custom settings in SXi-Q)
- Balanced 2A charging via USB (use while charging)
- Auto-rotating display and graphical user interface
- Comfortable stainless steel fire button
- Upgradeable firmware via USB port
- Reverse polarity, output short, low resistance, low battery, voltage and overheat protection
- Gravity sensor system
- SXi-Q software to customise your settings (PC required)
