The Multi-Voltage Dial-A-Tekk Mod!!!!!

Discussion in 'Nhaler' started by Drewsworld, Jul 26, 2010.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    The Multi-Voltage Dial-A-Tekk Mod, carries two 18650 2200 mAh batteries and should last two to four days, varying by user.

    This variation of the Tekk mod now features a dial on the bottom of the device that allows anywhere from 1.25v to 5.8v (approx) vaping.

    Unit charges with mini USB and can also be used as a passthrough while charging. Features convenient on/off switch on the front of the mod and a 5v out charging port that allows you to charge anything electronic you have that uses a USB cable. The Multi-Voltage Tekk Mod comes with one gray lanyard, one drawstring carrying pouch, a 510 to 901 adapter and a 510 to 801 adapter.
    [​IMG]

    There are extremely low quantities available which more coming in by the end of the week!! The Multi-Voltage Tekk Mod sells for only $160 with 10% off when you use SaveinNJ as a coupon code!!!!!!!

    We just got more of these in stock today!!! Check them out!
    [​IMG]
    [​IMG]
     
  2. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    Thanks Everyone...SOLD OUT!!!
    I will have more by the end of the week I hope...The new ones will be slightly different also!!! Thanks again
    Drew
     
  3. debook

    debook Super Member Verified Member ECF Veteran

    Joined:
    Jan 20, 2010
    Location:
    CO
    Wow...cool looking mod.
     
  4. badkolo

    badkolo ECF Guru ECF Veteran

    Joined:
    Oct 17, 2009
    Location:
    Whitestone , New York USA
    holy moly, ok i missed out but i wont miss it again, thats hot.

    will there ever be a version that goes down to 3.7?
     
  5. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    Yes!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
     
  6. badkolo

    badkolo ECF Guru ECF Veteran

    Joined:
    Oct 17, 2009
    Location:
    Whitestone , New York USA
    your one amazing dude. this thing looks stunning and 2 18650 batts, holy freakin christ.

    i can see the future now<><><><> a mod just like this with a 18650 and instead of the second 18650 next to it , instead it would be a long 20ml bottle of juice, A SUPER WETBOX... sorry i was dreaming for a sec.
     
  7. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    I actually had these made for me by someone, that didnt have the time to deliver them so I am working with someone else to bring them to market with a couple different features... A search on the forum here will lead you to the original Parky Tekk Mod that had 5 Volts exclusively( I believe)...This is great device used for charging phones and other poratble power needs...
    In fact if you bought the Tekkeon on its own , you could use it with a 5V passthrough and enjoy days on end of 5V vaping without any modifications at all...
    This one delivers variable voltages including a setting that will run Low Resistance attys...
    Thanks Man
    Drew
     
  8. Parky50

    Parky50 Super Member ECF Veteran

    Joined:
    Jan 5, 2010
    Location:
    Colorado Springs, Colorado
    Thanks for the acknowledgment Drew...

    Good luck on your sales !!!
     
  9. Bageone

    Bageone Super Member ECF Veteran

    Joined:
    Mar 9, 2010
    Location:
    Sacramento, CA
    You know... I am really thinking about getting one of those power sources for my 5v passthru. Much better picture than strapping an oxygen tank on and a face mask. So if you see an old woman hobbling down the isles of wally world blowing clouds of vapor and usb cords flapping in the wind... that would be me! Thanks for the idea!
     
  10. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey

    Thanks Parky...Your humility is refreshing...All your mods and ideas are pretty cool...
    Thanks again
    Drew
     
  11. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    We've got more Tekk Mods in today!!!! Live on the site now!!!!!!!!!

    These are the new vaping levels:
    * 3.7v approx. (LR Settings)
    * 4.1v approx.(LR Settings)
    * 4.4v approx.
    * 4.6v approx.
     
  12. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    Only 2 left until the next run..Thanks everyone...


    ETA: BTW for those that didnt inquire directly, these units are GREAT with Low Resistance attys on the 2 lowest settings and just as awesome on the other 2 with regular attys..
    The other ones were a little hot in my opinion on the higher settings so we tweeked them down...These higher settings simulate loaded 5 Volts perfectly and maintain clean conditioned voltage through the batteries life...They will easily last 2 days of HEAVY VAping and as many as 3 to 4 days of moderate vaping... Thanks again
    Drew
     
  13. piratecaptainbob

    piratecaptainbob Senior Member ECF Veteran

    Joined:
    Jun 5, 2010
    Location:
    north carolina
    just ordered it, looked like the last one in stock. Im new to ordering mods and very picky about them, this thing looks and sounds frickin awesome. cant wait.
     
  14. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    The Dials are in and Im testing and figuring out how to mark them so you can tell what volt range you are in...These are gonna be GREAT...
    Drew
     
  15. mwa102464

    mwa102464 ECF Guru ECF Veteran

    Joined:
    Oct 14, 2009
    Location:
    Outside of the Philadelphia Burbs, NJ & Fla
    I gotta say I love this dam Mod and take it everywhere with me, it fits in your hand so comfortably and what drew says about the setting is right on, I run LR510 & LR306 Attys on mine and they kick some serious .... I have been running a regular 510 on it with the 2 higher settings and same thing kick ... vapor and flavor. Mine last for what seems like forever you just have to remember to turn it off when done vaping to make it last, I also hooked up my AFS on this Tekkeon and can run with 6ml's of liquid all day, no matter what your set up all I can say is this is one heck of a Mod Drew.!!
     
  16. Ease

    Ease Senior Member Verified Member ECF Veteran

    Joined:
    Jul 10, 2010
    Location:
    Middle Tennessee
    How big is it? About the size of an iphone? Got dimensions?
     
  17. youtubecommercial

    youtubecommercial Ultra Member Verified Member ECF Veteran

    Joined:
    Jun 2, 2009
    Location:
    Florida

    Dimensions: 3.3 x 2.1 x 1.1 inches ; 4.5 ounces
    A very nice mod :)
     
  18. mwa102464

    mwa102464 ECF Guru ECF Veteran

    Joined:
    Oct 14, 2009
    Location:
    Outside of the Philadelphia Burbs, NJ & Fla
    jUST GO TO NHALER.COM AND CLICK ON ITS PIC IT WILL GIVE YOU EVERYTHING
     
  19. Drewsworld

    Drewsworld Resting In Peace

    Joined:
    Mar 14, 2009
    Location:
    New Jersey
    Coming very soon!!!!!

    Our new variation of the Tekk mod now features a dial on the bottom of the device that allows anywhere from 1.25v to 5.8v (approx) vaping.

    Nhaler.com | The Multi Voltage Tekk Mod
    [​IMG]
     
  20. NuGalicia

    NuGalicia Senior Member ECF Veteran

    Joined:
    Jun 7, 2010
    Location:
    Tulalip WA
    WOW!! THAT's WHAT I'M TALKIN' ABOUT! Great info on your site (once I clicked the thumbnail). It really sold me!! Now I gotta' have one!! I'd better start savin'. Way cool product!
     
Thread Status:
Not open for further replies.

Share This Page