The YiHi SX350 35W Chip at Varitube

[rhelton]

Got it today...

I'll build it tomorrow!!!


Sent from my iPad using Tapatalk

Did you catch the Plumes of Hazard on Monday this week? Mastblast went over how to mount the chip and buttons. The rest is pretty straight forward but its good info on how to mount the board.

 

[AstroTurf]

Did you catch the Plumes of Hazard on Monday this week? Mastblast went over how to mount the chip and buttons. The rest is pretty straight forward but its good info on how to mount the board.

Yes I did...

That's what prompted the purchase!

Jim


Sent from my iPad using Tapatalk

 

[rhelton]

Yes I did...

That's what prompted the purchase!

Jim


Sent from my iPad using Tapatalk

Very cool! Are you going to paint the enclosure or just go bare.

 

[AstroTurf]

Very cool! Are you going to paint the enclosure or just go bare.

Bare


Sent from my iPad using Tapatalk

 

[rhelton]

Bare


Sent from my iPad using Tapatalk

My 60w sx350 is in a bare hammond and it has worked out great. No paint problems lol.

 

[Onedesign1]

There is also a downloadable link for step by step on the web page. let us know how the build goes!

 

[AstroTurf]

Started this morning...

 

[Onedesign1]

super!

 

[AstroTurf]

Closer...

 

[AstroTurf]

Just ordered one!

Thanks Again, Jim

Got it today...

I'll build it tomorrow!!!


Sent from my iPad using Tapatalk

Started this morning...

Closer...

This is a post in progress. If your see this bit, make sure to check back as I will finish with pix from tapatalk after lunch.

Jim

PS She is Vapin Great!!!

Transferred to a more accurate thread...

Renegade X-Mod kit - by Varitube | E-Cigarette Forum

 

[Jake67]

This is a post in progress. If your see this bit, make sure to check back as I will finish with pix from tapatalk after lunch.

Jim

PS She is Vapin Great!!!

Transferred to a more accurate thread...

Renegade X-Mod kit - by Varitube | E-Cigarette Forum

I'm interested in your opinion on the chip. Is this your first temp control device?


Sent from my iPhone

 

[AstroTurf]

I'm interested in your opinion on the chip. Is this your first temp control device?


Sent from my iPhone

I own the IPV4 also.

But to be fair, I have not tried temp control.

 

[Onedesign1]

nice work Astro! Glad you are enjoying the build!

 

[AstroTurf]

nice work Astro! Glad you are enjoying the build!

I am...

Very much so...

Considering getting another.

 

[rhelton]

Looks good

 

[AstroTurf]

Looks good

Thanks!

 

[rhelton]

Thanks!

It looks like you could put a decent size lipo pack in there. Would you mind measuring from the space from the inductor to the other edge and from the bottom to the 510? Im gonna see if I can find something to fit there or make a pack from two flat 3.7 lipo's.

 

[AstroTurf]

It looks like you could put a decent size lipo pack in there. Would you mind measuring from the space from the inductor to the other edge and from the bottom to the 510? Im gonna see if I can find something to fit there or make a pack from two flat 3.7 lipo's.

I will...

They will not be caliper accurate though.

I'll do it tomorrow.

Jim

 

[rhelton]

I will...

They will not be caliper accurate though.

I'll do it tomorrow.

Jim

Yah that close enough for me. Thank you

 

[ThunderDan]

@Onedesign1 Any plans to update the J box Renegade kit with the 350J-V2 board when it comes out?