Troubleshooting checklist Guide

[BuzzKill]

Buzz Pro ,. I Pro , VvproV
troubleshooting check list


batteries charged ?? ( use a voltmeter if you have one , they should read 4.2 volts each )
Take off the atty /carto first
Do you have a RED LED light ?
DO you have a Blue Led light when the button is pushed.
DO you have a Blue led with the ATTY/CARTO ON the unit ?
Do you have BOTH red and Blue led lights ?
Do you get a blue led with the atty/carto ON but no vapor ?




VVPV only :
dripping , does the drip system work ?
Does it pump out of the unit ?
is the tube cracked or crimped ?

 

[908Tracy]

Could we put a link to the RMA form here for easy reference?

http://www.notcigs.com/pages/RMA-form.html

 

[BuzzKill]

Bumpomatic !!!

 

[SlowTalker]

I recently purchased a second Buzz as a back up and started having problems right off the bat. Lights were correct, batteries fine, no fire to carto. I swapped everything out to my old buzz and the carto fired fine. The only difference between the two buzzes was the brand new shorty adapter I had installed to the new Buzz. I took it off and cleaned it with alcohol, running a toothpick along the threads for good measure. Completely solved the problem. All I can think was that there was some factory "goo" left on the adapter from manufacture. Thought I'd mention it because if I hadn't had the two buzzes to compare I would never have thought to check it.

 

[Bovinia]

Thanks for the tip Slow, and I'm glad it was an easy fix