Twisted Drip Tips Mod to work with Cartos bonus Darwin Pics

Discussion in 'Tips and Tricks' started by Arvidx, Apr 4, 2011.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Arvidx

    Arvidx Senior Member Verified Member ECF Veteran

    Joined:
    Nov 25, 2009
    Location:
    Tucson, Arizona, United States
    This Question I have seen in many different places. How do you make a Carto Drip Tip? That or the complaint that using a drip tip with a cart ends up with a gurgling splashing angry carto the next hit. Well here's an easy solution that makes your drip tip Universal. You can still drip into your classic 510 or 901, the liquid will stick to the walls by default, but the wick will pull the liquid up from the sides.

    There is only one thing you need to know. Its all in the Bevel.

    You only need a drip tip that starts with a decent sized bottom end hole. It needs to be of a soft material, soft enough to shave with a pocket knife. This has worked great on the Twisted Drip Tips from Drew at NHaler.com and I would guess that delrin tips very well may work as well.

    I merely took a good sharp pocket knife, the Old Timer handed down from my father worked great. I took the edge of the hole and shaved it outward. There are detailed pictures I will link showing the effect. The actual process is just spinning the drip tip in your fingers while shaving away on the inner edge of the hole. You want a good deep angle in the end and it should come out flush to the outer rim. The best tip I can give is shave the smallest amount you can off at a time, like peeling a potato. Keep the angle very small and spin away. You will get slivers coming off like fingernails if you are doing it well.

    The bevel going from the inner tube to the outer rim tracks the juice outward and against the wall. I can drop 10 drops full speed into a carto and then take off the drip tip and look into the middle of the stuffing and not a bit of liquid ended up dropping into the middle. When I go for the first hit, there is no gurgle or popping of juice.

    Voila!

    I hope this helps those out there who are loving the quality on the new cartos!




    Twisted Drip Tip Secret.jpg
    Twisted DripTip CloseUp.jpg
    Both Twisted Tips plus Carto.jpg
    Twisted Drip Tip Another Angle.jpg
    Two Favorite Vapes.jpg

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Arvidx

    Arvidx Senior Member Verified Member ECF Veteran

    Joined:
    Nov 25, 2009
    Location:
    Tucson, Arizona, United States
    Here's another pic
     
  3. Arvidx

    Arvidx Senior Member Verified Member ECF Veteran

    Joined:
    Nov 25, 2009
    Location:
    Tucson, Arizona, United States
    Boy I thought this would be useful for someone.
     
  4. Oakshios

    Oakshios Senior Member ECF Veteran

    Joined:
    Mar 18, 2011
    Location:
    Boise, ID
    I will try it when i'm vaping on my ego instead of my phidias. Thanks for the tip.
     
  5. Arvidx

    Arvidx Senior Member Verified Member ECF Veteran

    Joined:
    Nov 25, 2009
    Location:
    Tucson, Arizona, United States
    No problem! I am amazed at how well it ensures the drops slip directly down the sides of the tube, I can pour drips full speed and rarely end up with any in the middle any more. I almost always used to take off the drip tip on cartos because dripping ended up landing in the middle gurgling then spitting hot liquid up if I use it in the next few minutes.
     
  6. Andyhrn

    Andyhrn Super Member ECF Veteran

    Joined:
    Mar 1, 2011
    Location:
    TX
    Well, first of all we don't have your father's "Old Timer" magic knife:laugh:
    Second, the dirlin drip tip has thin walls and this method will just damage the tip.

    But the idea is great. I'm sure many ppl wants to use this method but it can't be done for the most of the cheap tips.
     
  7. morepyro

    morepyro Senior Member ECF Veteran

    Joined:
    Apr 5, 2010
    Location:
    Mooresville, NC
    Thanks Arvidx. It works just like you said for easy dripping.

    I don't have my father's "Old Timer" knife because, well, he's still using it. But I do carry the same kind (Swiss Army Executive) every day.

    I'm using the shorty delrin drip tip from MadVapes and had no problem with the wall thickness. It's got plenty to spare for this.

    I started with the knife, but it was slow going because I haven't sharpened it for a while. So I used a tapered die grinder bit in a cordless drill to speed things up. Easy to control the speed, and not take out too much material.
     
  8. IOU

    IOU Registered Supplier - Offline ECF Veteran

    Joined:
    Dec 18, 2010
    Location:
    Laguna Beach, California
    Fantastic idea and it works pretty well too! Thanks!
     
: madvapes
Thread Status:
Not open for further replies.

Share This Page