Youde Tech UD Bellus
Features:
Big Capacity: 5ml
With 32 airholes to control the airflow.
Material: SUS304
Color: silver
510 Threading connector
Glass tank, compatible with Goblin Mini RTA.
Perfect combination with the RDA experience in a RTA.
New Design of side airholes, never leaking.
Direct blow coils, extreme vaper production.
Outer Diameter: 22mm
Height: 45.5 mm(without drip tip & 510 thread)
Net Weight: 56g (with drip tip); 50g (without drip tip)
tank Size: 22 x 19 x 20 mm / 0.87 x 0.75 x 0.79 inch
Package:
1x Bellus RTA body
1x Replace pyrex glass tuble
2× 26ga KA1 pre-build coils
1x Single coil adaptor
1x insulation silicon sleeve
1x Red silicon adaptor
4x Black o-rings
1× silicon o-rings for drip tip
2× Red silicon seal ring
2× Cross round head screws
1× Japan cotton(60*80mm)
Some quick thoughts below & I LOVED the top fill and 5ML capacity. I want to thank forum vendor healthcabin.net for getting me one early ahead of other orders.
Box shots, package shots.
Tank shots, deck etc.
So pro's and cons ....
Pro
Over all no RTA is for a brand new vapor IMO, but if you are looking for for your 1st one to try out look no further. This Bellas was super easy to get to vaping on. UN-packing, installing coils/cotton and vaping took me about 10 minutes.
Flavor and vapor productions very solid (tested 50 watts) and I would give the air flow 8 out of 10. I appreciate the noise baffle, but I am not a fan of something in front of the air flow channel.
Here is my morning coffee round up preview!
Features:
Big Capacity: 5ml
With 32 airholes to control the airflow.
Material: SUS304
Color: silver
510 Threading connector
Glass tank, compatible with Goblin Mini RTA.
Perfect combination with the RDA experience in a RTA.
New Design of side airholes, never leaking.
Direct blow coils, extreme vaper production.
Outer Diameter: 22mm
Height: 45.5 mm(without drip tip & 510 thread)
Net Weight: 56g (with drip tip); 50g (without drip tip)
tank Size: 22 x 19 x 20 mm / 0.87 x 0.75 x 0.79 inch
Package:
1x Bellus RTA body
1x Replace pyrex glass tuble
2× 26ga KA1 pre-build coils
1x Single coil adaptor
1x insulation silicon sleeve
1x Red silicon adaptor
4x Black o-rings
1× silicon o-rings for drip tip
2× Red silicon seal ring
2× Cross round head screws
1× Japan cotton(60*80mm)
Some quick thoughts below & I LOVED the top fill and 5ML capacity. I want to thank forum vendor healthcabin.net for getting me one early ahead of other orders.
Box shots, package shots.
Tank shots, deck etc.
So pro's and cons ....
Pro
- Top Fill
- 5ML
- Extra Glass
- Many Extra Rings
- Single Coil Adapter Capable
- Air Flow Baffle (Less Noise)
- Extra Screw
- Good Flavor
- Very Good Vapor
- Quality Machining
- Only came with 2 coils, would have like to seen 4-6 (some newbie is going to mess one up and have a bummer 1st experience with no extra on a dual build)
- Should include at least a set of Ni coils
- More clarification in the box on single coil adapter/instructions
- 1st fill up, tad bit of juice escaped via air control (seen before on top fill as back pressure is lost when cap is removed)
Over all no RTA is for a brand new vapor IMO, but if you are looking for for your 1st one to try out look no further. This Bellas was super easy to get to vaping on. UN-packing, installing coils/cotton and vaping took me about 10 minutes.
Flavor and vapor productions very solid (tested 50 watts) and I would give the air flow 8 out of 10. I appreciate the noise baffle, but I am not a fan of something in front of the air flow channel.
Here is my morning coffee round up preview!
Last edited:
