Status
Not open for further replies.
vp-logo-7-1-jpg.490758

Hello and thank you for having us here on the ECF Forums.

Please browse what we have to offer, new products added daily.
VAPRCANADA | VAPRCANADA

 

Attachments

  • vp logo 7.1.jpg
    vp logo 7.1.jpg
    255.5 KB · Views: 391
Last edited by a moderator:
  • Like
Reactions: juskiddin
VAPRCanada is proud to present the uwell Crown lineup of coils.
Click Here to get it for only $15.50!

uwell Crown Sub-Ohm Coil
UWell_Crown_0.25_Ohm_grande.jpg

Compatibility
  • Uwell Crown Tank
The Uwell Crown Ni200 Atomizer Head uses Stainless Steel wire, and 100% Organic Cotton for superior wicking, clean flavor and plumes of vapor.

Specifications
  • Stainless Steel Coil
  • Dual Coil Setup
  • 100% Japanese Organic Cotton
  • 0.25 ohm / 0.5 ohm Variants
What's included in the box?
  • 4x Uwell Crown Sub-Ohm Coils
Uwell Crown Ni-200 Coil
UWell_Crown_Ni-200_grande.jpg


Compatibility
  • Uwell Crown Tank
The Uwell Crown Ni200 Atomizer Head uses Nickel wire, and 100% Organic Cotton for superior wicking, clean flavor and plumes of vapor.

The Ni200 Nickel coil in the UWell Crown Atomizer Head is compatible with devices that are capable of temperature control only.

Specifications
  • Ni200 Nickel Coil for TC (Temperature Control)
  • 100% Japanese Organic Cotton
  • 0.15 ohm Resistance
What's included in the box?
  • 4x Uwell Crown Ni-200 Coils
 

6358794471145724228097466.png


6358794472103536726204400.png


6358794473113595319454493.png


6358794467865157815020956.png


6358794466814767199828765.png


Features
  • The Athena Hero box mod has 2 modes: Power mode and Temperature Control mode.
  • Powered by 3 x 18650 battery (sold separately).
  • 5 W - 240 W power output. The temperature range is 100~300'C / 200~600'F.
  • Output over-discharge protection
  • Original PCB and program design
Specifications
  • Power Output: 5 Watts - 240 Watts
  • Temperature Range: 100°C - 300°C | 200°F - 600°F
  • Input Voltage: 8 Volts - 12.6 Volts
  • Output Voltage: 0.0 Volts - 10.0 Volts
  • Resistance Range: 0.05 Ohms - 4.00 Ohms (Optimal Resistance is 0.45 Ohms - 4.00 Ohms to reach the maximum voltage output of 10 Volts.
 

JoyeTech_Cuboid_Mini_Kit_Colours_Canada.png


The Cuboid Mini kit with the new NotchCoil 0.25ohm DL. coil lasts longer and can be used under high wattage conditions.

With the special oblong shape the Cuboid Mini Atomizer can perfectly match the device.

The Cuboid Mini applies two sets of battery protection circuit system which makes it more advanced and reliable.


Features
  • Compact yet Powerful - The Cuboid Mini comes with the similar design of the original Cuboid but in a smaller design, which is much easier to grip. It is powered by a 2400 mAh built-in battery, whose maximum output can be reached to 80 Watts.
  • Dual Circuit Protection - The Cuboid Mini applies two level battery protection circuit system. Prevents the battery from over-charge, over-current and over-discharge, resulting in a safer and more reliable system.
  • New NotchCoil 0.25ohm DL. Coil - The new NotchCoil 0.25ohm DL. (Direct Lung) coil lasts longer and can be used with higher wattage. Thicker vapour and cleaner taste.
  • Exclusive TFTA-Tank Technology - This TFTA-Tank (top filling and top airflow tank) allows the top section and coil to be removed as one solid unit. Coil replacement and juice fill can be achieved by removing this top section from the cup.
Specifications
  • Size: 35.5 mm x 22.5 mm x 124.5 mm
  • Battery Capacity: 2400mAh (Built-in)
  • Tank Capacity: 5.0 ml
  • Output Mode: VT-Ti | VT-Ni | VT-SS316 | VW | BYPASS | TCR Mode
  • Output Wattage: 1 Watt - 80 Watts
  • Resistance Range: 0.05-1.5ohm for VT mode
    0.1-3.5ohm for VW | BYPASS mode
  • Temperature Range: 100°C - 315°C | 200°F - 600°F
  • Available Colours: Black | Silver | Grey | White | Gold |
What's included in the box?
  • 1x Cuboid Mini
  • 1x Cuboid Mini Tank
  • 1x NotchCoil 0.25ohm DL Coil
  • 1x BF SS316 0.5ohm Coil
  • 1x BF Clapton 1.5ohm Coil
  • 1x BF RBA M&L. (Vertical) Coil
  • 2x Mouthpieces
  • 1x USB Cable
  • 1x User Manual
  • 1x Warranty Card
 
iStick_Pico_Colour_Options.jpg


The iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO).

With a compact size, you can hold it in the palm of your hand which makes it far more convenient for usage and portability.

Powered by a single interchangeable 18650 cell (sold separately), the iStick Pico also provides you with 75W maximum output and switchable VW | Bypass | TC-Ni | TC-Ti | TCR modes.

Specifications
  • Dimensions: 45mm x 23mm x 70.5mm.
  • Thread type: 510 thread.
  • Cell type: 18650 battery (Battery sold separately)
  • Output mode: VW | Bypass | TC (Ni | Ti | SS | TCR-M1 | M2 | M3) mode.
  • Output wattage: 1 Watt - 75 Watts.
  • Resistance range: 0.05 Ohms - 1.5 Ohms (TC modes) 0.1 Ohms - 3.5 Ohms (VW/Bypass mode).
  • Temperature range: 100℃ - 315℃ | 200℃ - 600℉ (TC modes)
  • Colour Options
What's included in the box?
  • 1x ELeaf iStick Pico Mod
  • 1x Micro-USB Cable
  • 1x User Manual
 
Status
Not open for further replies.

Users who are viewing this thread