Vape cases

[coffeebum]

Everything is good here, just inconvenient for a few days. No real damage to property other than a few trees down, generator kept the freezer and fridge going. Even had TV so the old man could watch some of his shows!
I am sure there are other forum members hit a lot harder, and maybe some of them still getting hit with flooding.

 

[Jim-]

Glad to hear the storm left you and yours whole CB[emoji106]


Sent from my iPhone using Tapatalk

 

[droogalo]

Hi x dou you make one for the lavabox with upgraded buttery and extension?

Sent from my SM-G920T using Tapatalk

 

[coffeebum]

Hi x dou you make one for the lavabox with upgraded buttery and extension?

Sent from my SM-G920T using Tapatalk

Have not had one of those come in yet

 

[coffeebum]

Time for a list update, added a couple more mods, Lost Vape Triad and Therion.
Also checked the fit with a member here and the Wismec Reuleaux 2/3 fits in my standard case.

22mm Tube mods
24mm Tube mods
Beastmode BMI
Billet Box
Council of Vapor - Mini Volt
Custom Classic
Hanna Modz V3 DNA40 pack
Innokin iTaste MVP 2.0
Innokin Coolfire IV
Innokin IPV3 and LI
iStick 30w (clip only)
iStick 50W
iStick 40w TC
joyetech Cuboid
joyetech Cuboid Mini
Joyetech eVic VT (no sleeve)
Joyetech eVic VT (with sleeve)
Joytech eVic-VTC Mini
Kanger SUBOX Mini
Kanger TOPBOX Mini
Kanger DRIPBOX 160W
Lost Vapes Triad
Lost Vapes Therion
Noisy Cricket
Praxis belt case (also other 22/23mm tube mods)
Provari Radius
REO Grand
REO P67
Sigelei 213w TC
Sigelei 150w TC
Sigelei 100watt/150watt including Plus versions (no sleeve)
Sigelei 50W VR2 (no sleeve)
Sigelei Mini 30 (no sleeve)
smok X Cube II
Snow Wolf 200w TC
SunboxE7
Sunbox E8 Modulo
Tmodcustoms bottom feeder mod "Boy" mech
Tmodcustoms bottom feeder mod "Girl" mech
Tmodcustoms bottom feeder mod "Tranny" mech (also "Pregger" model)
Tmodcustoms bottom feeder mod "Mini" mech
Tmodcustoms bottom feeder mod SX 350j regulated squonker
Vapor Shark rDNA 40 with Shark Skin
Vapor Shark rDNA 40 without sleeve
Vapor Shark DNA 30 with Shark Skin
Vapor Flask DNA 40
Wismec Reuleaux DNA 200 and RX, also fits the 2/3 model
Zero Modz DNA 40

Base price is $40.00 plus shipping (except for the iStick 30w, which is $30.00)
This is for the basic black kydex or any of the solid colors with no felt lining
This includes a belt clip for 1.5" and smaller belts.
Felt liner is an additional $20.00 (if you keep a vinyl wrap on the mod like a jwrap then you don't need this option)
Faux carbon fiber is an additional $3.00
Skull pattern, digital camo, and other custom patterns are an additional $5.00
Shipping: USPS Priority I will do for $6.00
(US only, PM for shipping estimates to another country)

 

[icedsoul]

Are you still making these cases? I was looking into getting a case for my Reuleaux 200

 

[coffeebum]

Are you still making these cases? I was looking into getting a case for my Reuleaux 200

Cool, but am neck deep in a project and need a few more days to get finished. Hit you up when thar is done?

 

[icedsoul]

Cool, but am neck deep in a project and need a few more days to get finished. Hit you up when thar is done?

please do! and thanks ahead of time

 

[Mr Woot]

Are you still making mod holsters? Any how, would the 24mm tube mod holster fit a 25mm mech mod? Thanks

 

[1buda]

When you got the time, I need to get a holster for my Provari mini.

 

[coffeebum]

Fellas I am kinda in a bind right now, dad has had some medical issues we needed to take care of so I have had to put off some work stuff. He is pretty much OK now, and back to watching fox news and the Cowboy channel. I cannot take on any new stuff for a couple more weeks, I need to get my current commitments done before taking on any more. Yes I am still making cases, but need to ask for a little patience.

Thanks
coffeebum

 

[penguiness]

I hope your Dad continues to improve!

 

[beckdg]

Sorry to hear, brother.

You and pops will be in my thoughts.

If you need a place to vent, I'm here.

Tapatyped

 

[Moxienator]

Sorry to hear that brother.
Sending good thoughts your dad's way!

Fortune favors the Bottom Feeders.

 

[camerajunkie]

Fellas I am kinda in a bind right now, dad has had some medical issues we needed to take care of so I have had to put off some work stuff. He is pretty much OK now, and back to watching fox news and the Cowboy channel. I cannot take on any new stuff for a couple more weeks, I need to get my current commitments done before taking on any more. Yes I am still making cases, but need to ask for a little patience.

Thanks
coffeebum

Hope your Dad is doing better and that you're out of the woods! Can't wait for my next holster!

 

[Fozzy71]

Time for a list update, added a couple more mods, Lost Vape Triad and Therion.
Also checked the fit with a member here and the Wismec Reuleaux 2/3 fits in my standard case.

22mm Tube mods
24mm Tube mods
Beastmode BMI
Billet Box
Council of Vapor - Mini Volt
Custom Classic
Hanna Modz V3 DNA40 pack
Innokin iTaste MVP 2.0
Innokin Coolfire IV
Innokin IPV3 and LI
iStick 30w (clip only)
iStick 50W
iStick 40w TC
Joyetech Cuboid
Joyetech Cuboid Mini
Joyetech eVic VT (no sleeve)
Joyetech eVic VT (with sleeve)
Joytech eVic-VTC Mini
Kanger SUBOX Mini
Kanger TOPBOX Mini
Kanger DRIPBOX 160W
Lost Vapes Triad
Lost Vapes Therion
Noisy Cricket
Praxis belt case (also other 22/23mm tube mods)
Provari Radius
REO Grand
REO P67
Sigelei 213w TC
Sigelei 150w TC
Sigelei 100watt/150watt including Plus versions (no sleeve)
Sigelei 50W VR2 (no sleeve)
Sigelei Mini 30 (no sleeve)
Smok X Cube II
Snow Wolf 200w TC
SunboxE7
Sunbox E8 Modulo
Tmodcustoms bottom feeder mod "Boy" mech
Tmodcustoms bottom feeder mod "Girl" mech
Tmodcustoms bottom feeder mod "Tranny" mech (also "Pregger" model)
Tmodcustoms bottom feeder mod "Mini" mech
Tmodcustoms bottom feeder mod SX 350j regulated squonker
Vapor Shark rDNA 40 with Shark Skin
Vapor Shark rDNA 40 without sleeve
Vapor Shark DNA 30 with Shark Skin
Vapor Flask DNA 40
Wismec Reuleaux DNA 200 and RX, also fits the 2/3 model
Zero Modz DNA 40

Base price is $40.00 plus shipping (except for the iStick 30w, which is $30.00)
This is for the basic black kydex or any of the solid colors with no felt lining
This includes a belt clip for 1.5" and smaller belts.
Felt liner is an additional $20.00 (if you keep a vinyl wrap on the mod like a jwrap then you don't need this option)
Faux carbon fiber is an additional $3.00
Skull pattern, digital camo, and other custom patterns are an additional $5.00
Shipping: USPS Priority I will do for $6.00
(US only, PM for shipping estimates to another country)

when you have time, if I sent you a hohm wrecker g2 could you build me a holster or 2 for it? and maybe a spare aiwb holster for my glock 19?

 

[rudy4653]

Any chance of a holster for the new Turbocad6 BAM mod coming in the future?

 

[coffeebum]

Any chance of a holster for the new Turbocad6 BAM mod coming in the future?

If people send me a mod to fit up, then sure.
I can sometimes do a mold from good measurements, but having something to hold is always better.

 

[rudy4653]

Got it thanks!
Will be tough giving up my mod for a few days though!
basically almost identical to a woodvil in size.
Maybe I can talk Russ ( superxdrifter) to send in one of his BAM mods for fitting since he has 2 of them!
Pictures of my lady's & my new BAM mods next to a customized Woodvil made by Turbocad6.

 

[super_X_drifter]

Rudy, Turbo is sending me a mod body. I'll shoot it to @coffeebum. No way I'd part with a fing working Apple bro.