1. Take part in the #WeAreVapor campaign

    Dear Guest, 

    The  #WeAreVapor campaign has just launched and needs your help. This is a massive push to get vapers and vapor businesses visible, and make Congress aware of the Cole-Bishop amendment. It is being organised by the Vapor Technology Association. 

    Please take a minute of your time to take a look at the site to see how you can get involved. 


    Dismiss Notice

Vision V3+ Dual Coil Clearomizer on Sale $4.99!

Discussion in 'EcigBestSave' started by akovac1939, Nov 19, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. akovac1939

    akovac1939 Forum Supplier ECF Veteran

    Jan 29, 2010
    Vision V3+ Dual Coil Clearomizer with replaceable heating coil and wick. The Vision V3+ are the hottest and latest dual coil clearomizer for electronic cigarette device with 510/eGo threading from 3v to 6v, More cost effective changeable heating coil and wick. It produces a cleaner taste and greater vapor. E-Juice levels are totally visible. The Vision V3+ is fully interchangeable with all Vision V3 Bases, Tubes and Tips.

    How to fill:
    Step 1: Unscrew the driptip from the clearomizer
    Step 2:Fill 1.4ml-1.6ml of E-Juice from the side
    * DO NOT pour the E-Juice into the tube in the middle. The center hole is only for airflow.
    Step 3: Screw the drop tip back in.
    * Please allow 1-2 minutes for the E-Juice to feed into the coil before you start to vaping.

    How to change heating coil/wick assembly:
    Step 1: Unscrew Base (Bottom) of V-3 from fill tube.
    Step 2: Unscrew heating coil/wick assembly from base.
    Step 3: Screw new heating coil/wick assembly on base.
    Step 4: Screw base back into V-3 fill tube and tighten.
    Note: Use caution not to over tighten

    Best Match: Joye eGo Series Batteries and Passthoughs.

    Threading: eGo
    Packing: simple

Thread Status:
Not open for further replies.

Share This Page