1. Take part in the #WeAreVapor campaign

    Dear Guest, 

    The  #WeAreVapor campaign has just launched and needs your help. This is a massive push to get vapers and vapor businesses visible, and make Congress aware of the Cole-Bishop amendment. It is being organised by the Vapor Technology Association. 

    Please take a minute of your time to take a look at the site to see how you can get involved. 


    Dismiss Notice

Whats the best tank to use with Innokin Itaste SVD?

Discussion in 'General Vaping Discussion' started by cluelessnoob, Nov 30, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. cluelessnoob

    cluelessnoob Full Member

    Sep 28, 2013
    Uk Birmingham
    Hi Guys

    Bought an Itaste SVD because the Totally wicked vape pro im using is a pile of junk.

    Whats the best tank set up for the SVD - so far ive tried the Vivi Nova (not bad), the Kanger protank 3 (rubbish) and the odyssey (hate to admit it, but its good).

  2. HawaiiVPR

    HawaiiVPR Moved On Verified Member

    Oct 19, 2013
    808 State
    Didn't your SVD come with an iclear30?

    Anyway, the best tank would be the one that fits your preference, so depends on the type of draw you like (tight or airy) the vapor temp your want (warm vape vs cool) and I guess the kind of ejuice you like to use (glass tank vs plastic; some e-juices don't go well with plastic, others have no reaction)
  3. Chas F.

    Chas F. Ultra Member ECF Veteran

    Sep 3, 2013
    I'm also looking for another tank setup. Right now I'm use a PT II with cotton and micro coil when I'm on the go. At home I use an IGO-I for dripping.
  4. HawaiiVPR

    HawaiiVPR Moved On Verified Member

    Oct 19, 2013
    808 State
    Sounds like you already have a good setup there, do you not like the PT2 or looking for a different style? If the PT2 works great for you, the PT2 mini works just as good, but in a more compact form.
  5. Thunderball

    Thunderball Vaping Master Verified Member ECF Veteran

    May 5, 2013
    Grayson, Georgia
    I have recently just experiened a Russian 91% (kayfun/Kayfun light/Kayfun light plus clone. I only paid 12 bucks for it at FT and it is the best vape I ever had. Really.

    I really think this is the highest level in a topper for vaping. Its is a rebuldable, its a dripper, its a tank system and its a rebuildable carto (sorta). The taste and smoothness of vape is just beyond compare and has no rivals.

    if you get one, get the one with the adjustable airflow valve which is the Russian 91%, Kayfun light plus, or a Rocket clone, or from VaporBreak... Russian rebuildable atomizer this one is the better made clone. The original is around 125.00 and out of stock almost everywhere.

    Really.. order the cheap Rocket from fastech for 12 bucks and see for yourself.

    Im so impressed that I ordered 5 of the 22 dollar ones from This VaporBreak place (china) ( better machining)
  6. jhelliwell

    jhelliwell Fog master Verified Member ECF Veteran

    Supporting member
    Sep 23, 2013
    Sheffielld, UK
  7. cluelessnoob

    cluelessnoob Full Member

    Sep 28, 2013
    Uk Birmingham
    Thanks for the tips guys

    but i dont have a clue what you are talking about, lol.

    Anyone have any links - jhelliwell, thanks bud but thats a US website and im not paying that kind of delivery.
    Any uk based tanks?

  8. Ladiekali

    Ladiekali Vaping Master Verified Member ECF Veteran

    Sep 1, 2013
    Just get a variety different juices do better with different tanks.
    I prefer cartotanks, i use smok dct
    I also like bcc my fave is the tumbler.
    I use iclears when i have juice that is kinda good but not really, the iclears are really warm and mute taste.
    The kanger t3s mutes flavor but is cooler.
    Get a variety, if your juicmdoesnt taste good, try it in a different clearo
  9. jhelliwell

    jhelliwell Fog master Verified Member ECF Veteran

    Supporting member
    Sep 23, 2013
    Sheffielld, UK
    Ah soory, I should've noticed your location. Try UD AGR+ and you will also need cartomizers and a carto punch

    [EDIT]You'll need a drip tip too. The tank doesn't come with a mouthpeice
  10. Danbrooks2k

    Danbrooks2k Super Member Verified Member ECF Veteran

    Nov 13, 2013
    Pensacola, Florida
    Smok Tech Pyrex Aro Tank

    As far as a regular tank goes... I get a great vape from these. No leaks, dry hits, gurgling. 4 out of 4 tanks working perfectly.
  11. Maggiemw

    Maggiemw Super Member Verified Member ECF Veteran

    May 23, 2013
    Middle East
    On my SVD I am using:

    1/ a protank II 2/ the iclear 30 that came with it 3/ my Eternity clone 4/a variety of GSs 5/ anything I feel like using...

    When my Kayfun clone gets here, I'll be using that too...

    It's all good. Find whatever suits you best and use it with the SVD...:vapor:
  12. boomhower1820

    boomhower1820 Super Member Verified Member ECF Veteran

    Apr 7, 2013
    You've tried several tanks but not a carto tank. Give one a shot. For cheap theres the Smok DCT. For more money but top of the line quality there is IBtanked. I've used EVODs, Protank, Protank 2, and Protank 2 mini's and have finally found my tank and it's IBtanked carto tanks.
  13. Chas F.

    Chas F. Ultra Member ECF Veteran

    Sep 3, 2013
    Don't get me wrong, I like it but asides from wanting to expand my experience with different vaping gear, I'm on the hunt for MORE flavor. I don't know if I'll ever find it, but the hunt is on! I may play around with different PG/VG mixes once I find a few recipes I really like but I'm not in any rush.
  14. Newyorkifornian

    Newyorkifornian Senior Member Verified Member ECF Veteran

    May 20, 2013
    New York
    I also just got my svd in...and looking at the kayfun/russian links now...how often would you say you have to rebuild them? Is rebuilding them irritating or is it pretty easy? I'm looking at that vapor break one you mentioned (kayfun lite/adjustable airflow).
  15. wonner

    wonner Ultra Member ECF Veteran

    Nov 13, 2013
    iClear 30S
  16. IMFire3605

    IMFire3605 Ultra Member ECF Veteran

    May 3, 2013
    Peoria, Arizona, US
    On my SVD, flavor, the best tank I've used and got the best flavor from is my Russian 91%. How the vape chamber and chimney are setup the vapor is compacted from the chamber up the chimney then compacted again at the mouthpiece, which enhances the flavor. If you can build a good coil in you Igo you can get a good coil going really quickly in the Kayfuns and Russian style tanks, an you get what you pay for with them.

    @Newyorkifornian - Though disassembly and re-assembly are a little more involved, rebuild and re-wick of a coil on them is not that difficult. Once you get a good coil built, the biggest issue is juice flow control and air flow on the full blown Kayfun 3.1 and full blown Russian, getting the adjustments just right is trial and error. The Russian 91% just has air flow control over the normal Kayfun Lite, the Kayfun Lite Plus addresses that downfall if you are looking. And remember, that both tank systems have dedicated fill ports at their bottom deck plates, they are there for a reason, filling from top then fully sealing one you have to get the threads started for the top cap then tilt upside down and finish screwing together or you'll flood the coil chamber, personally I don't mind removing my Russian 91%, remove a screw, fill, replace screw, and put back on my SVD.

    @OP - Not much anyone can tell you about a new system other than I can say, look at what you are wanting to do with you atty attachment, then look at tank capacity, convenience, and portability for that particular role. Just running to a store and back I'll grab my iTaste VV V3 with a Mini Vivi Nova, iClear16, or Protank Mini, out for a few hours with friends I take my SVD with my Russian, and my MVP with either my Hypertank or Cartotank on it, at work I run and gun with my MVP with a cartotank or 2 T3S tanks and my iTaste VV in my pack as a backup, out at a vape shop I got most my whole rig (rebuild kit, SVD, MVP, iTaste VV, couple mech units, and a slew of attachments I will be rebuilding during the setting), at home I'm running on my mechs with various dripping attys, as you see given different situations I adjust my PV configuration to compensate to last me the day or 2 days really.
  17. Newyorkifornian

    Newyorkifornian Senior Member Verified Member ECF Veteran

    May 20, 2013
    New York
    Thanks for that info - I really appreciate it! I'll pull the trigger and give it a try - this will be my first RBA (they look intimidating at first) - I ordered some cartos too so I figure if I'm feeling too irritated to bother with fiddling around I can throw one of those on & when I want to experiment I can dig into this one :)

    One more newb question if I could - How do you tell when it needs to be filled? (Obviously when not using the clear tank lol)
  18. Bawn

    Bawn Super Member ECF Veteran

    Nov 18, 2011
    boynton beach, FL
Thread Status:
Not open for further replies.

Share This Page