UD/Youde Skywalker
Hey guys I was sent this UD/Youde Skywalker to try out so I decided to review/share some info's ! I'd have to say this thing is awesome! Like most rda's in this category this definitely isn't for the MTL crowd, the airflow when wide open is almost feels like you're just breathing though it, it has side airflow (my preference for atty's like this),technically since it has adjustable airflow MTL people could possibly use it but honestly you would be better off with something with a tighter draw drip tip...
The build deck on this one is pretty great, It's a two post design that has huge 3mm post holes that can fit well pretty much any build you can think up in it to give you an idea here's a picture of not 2, not 4, not 6 but 8 Pieces 26/32 clapton in one post hole with some more room to work with.
The overall diameter of it is 24mm so it should fit nicely on most newer mods, the build deck I believe is 22mm and has a massive 4mm deep juice well that holds quite a bit of juice and the way it is machined it allows for some pretty big builds, it also comes with 2 positive pins, a regular one and a squonk pin for all you squonkers out there, 2x 0.3ohm fused claptons and plenty of spares. Here it is on my Noisy Cricket II-25 a real nice fit.
Please Note: The PEI/Ultem drip tip is from my Goon and does not come with the mod
The deck and main body is made of Stainless Steel and has PEI/Ultem as a secondary material which can handle high heat easily, it also dissipates heat extremely effectively so It helps to keep the Stainless Steel Drip Tip cool, personally I'm not a big fan of SS Drip tips as I find they hold too much heat and even though the Ultem helps when chain vaping low builds it does get warm however goon size drip tips as seen in the photo above will fit on this which is great since there's already so many custom ones out there
The way the AFC works is pretty great, it has 3 holes so you can adjust it to accommodate dual coil builds or have it cover the airflow on one side for a single coil build.
Here is how I wicked it in single coil mod, I pulled it through the coil, left one end long and pulled it between the posts tucked everything in place and fluffed the ends. I honestly didn't think it would work as good as it did but the flavor in single coil mode is actually pretty damn great so I plan on using it for bigger coils!
If I had to categorize this Atty I'd have to say it's a Competition Style/Cloud Atty with exeptional flavor considering how much airflow there is very similar to other rda's in this category but how small it is really gives it an edge over some of my other RDA's.
Honestly this fits my drip style perfectly and has everything I love about dripping, big side airflow, wide bore drip tip, easy to use build deck, fairly short so you don't lose all flavor from a warm vape.. I'd give this a 10/10 for my style dripping! This thing completely blows that last RDA Youde released (Anzu) right out
of the water and into orbit...
I'm seeing this listed on Fasttech for $16.59 and at that price it's a no brainer...
$16.59 Authentic Youde UD Skywalker RDA Rebuildable Dripping Atomizer - stainless steel / 24mm diameter at FastTech - Worldwide Free Shipping
Hope you enjoyed this review and here's a random cloud from single coil mode
Hey guys I was sent this UD/Youde Skywalker to try out so I decided to review/share some info's ! I'd have to say this thing is awesome! Like most rda's in this category this definitely isn't for the MTL crowd, the airflow when wide open is almost feels like you're just breathing though it, it has side airflow (my preference for atty's like this),technically since it has adjustable airflow MTL people could possibly use it but honestly you would be better off with something with a tighter draw drip tip...
The build deck on this one is pretty great, It's a two post design that has huge 3mm post holes that can fit well pretty much any build you can think up in it to give you an idea here's a picture of not 2, not 4, not 6 but 8 Pieces 26/32 clapton in one post hole with some more room to work with.
The overall diameter of it is 24mm so it should fit nicely on most newer mods, the build deck I believe is 22mm and has a massive 4mm deep juice well that holds quite a bit of juice and the way it is machined it allows for some pretty big builds, it also comes with 2 positive pins, a regular one and a squonk pin for all you squonkers out there, 2x 0.3ohm fused claptons and plenty of spares. Here it is on my Noisy Cricket II-25 a real nice fit.
Please Note: The PEI/Ultem drip tip is from my Goon and does not come with the mod
The deck and main body is made of Stainless Steel and has PEI/Ultem as a secondary material which can handle high heat easily, it also dissipates heat extremely effectively so It helps to keep the Stainless Steel Drip Tip cool, personally I'm not a big fan of SS Drip tips as I find they hold too much heat and even though the Ultem helps when chain vaping low builds it does get warm however goon size drip tips as seen in the photo above will fit on this which is great since there's already so many custom ones out there
The way the AFC works is pretty great, it has 3 holes so you can adjust it to accommodate dual coil builds or have it cover the airflow on one side for a single coil build.
Here is how I wicked it in single coil mod, I pulled it through the coil, left one end long and pulled it between the posts tucked everything in place and fluffed the ends. I honestly didn't think it would work as good as it did but the flavor in single coil mode is actually pretty damn great so I plan on using it for bigger coils!
If I had to categorize this Atty I'd have to say it's a Competition Style/Cloud Atty with exeptional flavor considering how much airflow there is very similar to other rda's in this category but how small it is really gives it an edge over some of my other RDA's.
Honestly this fits my drip style perfectly and has everything I love about dripping, big side airflow, wide bore drip tip, easy to use build deck, fairly short so you don't lose all flavor from a warm vape.. I'd give this a 10/10 for my style dripping! This thing completely blows that last RDA Youde released (Anzu) right out
of the water and into orbit...
I'm seeing this listed on Fasttech for $16.59 and at that price it's a no brainer...
$16.59 Authentic Youde UD Skywalker RDA Rebuildable Dripping Atomizer - stainless steel / 24mm diameter at FastTech - Worldwide Free Shipping
Hope you enjoyed this review and here's a random cloud from single coil mode