This site is supported by the advertisements on it, please disable your AdBlocker so we can continue to provide you with the quality content you expect.

Your Stealth Setup for On the Go...

Discussion in 'New Members Forum' started by Mossneck, Mar 2, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Mossneck

    Mossneck New Member

    Aug 8, 2013
    On a Vape Break
    Hello All,

    Long time lurker, first time poster.

    I have been into vaping about six months now (I know, still wet behind the ears) and I was wondering what folks like to use when they are out and about.

    For home use and in the car, I use a VTR (which I love) and Protanks (II and Mini). But when I'm at work or out for the evening, I needed something with decent capacity, no leaks, good flavor, and easy to vape and carry.

    So I have settled upon a Kanger EVOD. It works great for me because I already have the Protanks, and they all use the same heads. I have had zero leaks in my pocket (although I do rip the stock wick out and rebuild with cotton), decent performance, and love the small profile. I use the EVOD on a little 400 Ego battery.

    I can carry it all broken down in an Altoids tin with thin foam lining (no rattles). I can fit the EVOD, 400 battery, small glass juice bottle, and a small USB charger. Takes up about the same room as a pack of cigs used to.

    I know there are far more expericenced vapers out there, but if you are new like me, just want somethings that works (and is cheap), I recommend you give the setup a try. You can always play with the fun stuff around the house... :2cool:
  2. Papa_Lazarou

    Papa_Lazarou MKUltra Member Verified Member ECF Veteran

    Supporting member
    Nice call on the evod setup - they punch well over their weight and are so compact. Had to giggle about your transport kit - it reminded me of a sniper in the movies (carrying a case with the rifle broken down).

    Myself, I rock a Reo mini 2.1 for those need-to-be-inconspicuous times. It's quite small (in the hand or in the pocket), holds 3 ml of juice, and allows me the drip experience without the hassle or extra things to carry. It's also nigh indestructable. I have a rebuildable atty (the RM2) on it, but you can use disposable dripping atties or even cartos.
  3. Kropotkin

    Kropotkin Super Member ECF Veteran

    Jul 13, 2012
    I use one of my cheapie Segeleis in 18350 mode, with an Igo on top. This combo is stealthy, works great, and doesn't cost so much that I'd hang myself if I should lose it.

    I prefer a bottom button with a reverse locking ring, since this seems the least likely to fire in a pocket or purse.

  4. Mossneck

    Mossneck New Member

    Aug 8, 2013
    On a Vape Break
    Thanks for the info sir, greatly appreciated.

    I have been searching for a while about the exact "toughness" of a Reo. Got to admit, I want one, but need to learn more about squeezing your juice method.
  5. bkebruins

    bkebruins Senior Member Verified Member ECF Veteran

    Feb 23, 2014
    Only been vaping for 3 months, but for me I never leave the house without my MVP and a mini protank 2 with my favorite juice filled to the max(3ml).
  6. catlady60

    catlady60 Ultra Member Verified Member ECF Veteran

    Nov 14, 2013
    Nazareth, PA
    I use an MVP 1 with either Protank II's or Iclear 16's when I'm at home or in the car as a passenger.

    I have a couple of Egos with CE5 clearos for when I'm on the go, especially when I'm driving (it's a bit difficult to handle an MVP when you're driving a stick shift). I can easily stash the ego in my bra in winter; it keeps the batt, the clearo, and the juice warm enough to work.
  7. aelwero

    aelwero Full Member

    Nov 9, 2013
    I use an E-roll at work... it was my first starter, and it's a great replacement for analogs :) same "pack" (PCC), same time for a smoke break (the battery will run for about 5-10 minutes on a charge), and it hits really well for being so small. Only drawbacks are that it's a tad heavy, and the center part where you normally hold an analog gets hot enough to burn skin.

    I had originally planned on gradually switching over, but I haven't smoked a single analog since buying the e-roll kit at all. It worked to fulfill both the cravings and the mental "habit" part of smoking for me.
  8. sneakerpimp

    sneakerpimp Ultra Member ECF Veteran

    Oct 12, 2013
    The O.C.

    simple eGo with 15mm IBTanked.
  9. HeiSINberg

    HeiSINberg Ultra Member Verified Member ECF Veteran

    Nov 6, 2013
    Groveville, NJ
    My 4Nine mod by Tarsius Customs and MCV Atomic. Its actually smaller than it looks. I throw it in my pocket and half the time forget its there. This is 18650 mode too, it dissappears in 18350 mode.[​IMG]

    Sent from my SCH-I545 using Tapatalk
  10. rico942

    rico942 Ultra Member ECF Veteran

    Jul 12, 2013
    Carlsbad, CA
    Same here, the eRoll goes everywhere with me, the PCC looks enough like an iPhone to avoid notice ...

    Just ordered the Halo G6, read good reviews here on ECF. Its got over 3 times the battery capacity (280 mAh) and a 1ml tank ...

    Also carrying the Ovale Elips, I really like the warm quality of the vapor, and its not a cigalike, doesn't arouse any violent reactions from co-workers if they catch a glimpse of it. Looks a little like a felt tip highlighter ...

    Sadly, I work in an extremely smoke-hostile environment, vaping and smoking are considered one and the same ... :(
  11. Painter_

    Painter_ Super Member Verified Member ECF Veteran

    Dec 21, 2013
    In my happy place
  12. Papa_Lazarou

    Papa_Lazarou MKUltra Member Verified Member ECF Veteran

    Supporting member
    Juice squeezing - squonking - is easier than it sounds. There's a hole in the faceplate of the mod that lets you pinch the juice bottle with your thumb. You just give it a squeeze and release - the excess juice is sucked back into the bottle. Your wick is now wet and you vape as you would with a dripper (3 to 5 toots and then squonk again).

    As for toughness, they're made from a single block of aluminum and in the event of catastrophe, every working part is replaceable. No PCB's to wonk out, no wires involved.

    It's maybe not for everyone, but those of us who like them, like them better than any other device (ego's, APV's, mech mods, you name it).
  13. silvertorch

    silvertorch Senior Member ECF Veteran

    Feb 4, 2014
    Wow that looks really slick, nicely done =)

    What size tank is that, Normal or Halfling?
  14. sneakerpimp

    sneakerpimp Ultra Member ECF Veteran

    Oct 12, 2013
    The O.C.
    ^ halfling... holds around .4ml according to IBT's site.
  15. Mossneck

    Mossneck New Member

    Aug 8, 2013
    On a Vape Break
    I always wondered what happened to the extra juice, sounds like an easy setup. Might just have to take another look at picking one up after payday...
  16. endGame

    endGame Registered Supplier ECF Veteran

    Jan 11, 2014
    WA, USA
    ego minis, ibTanked halfling 15mm, ego straight ring -> total height: 89mm (3.5 in)
  17. sneakerpimp

    sneakerpimp Ultra Member ECF Veteran

    Oct 12, 2013
    The O.C.
    with IGO-S if you're into dripping...

  18. 2naphish

    2naphish Ultra Member Verified Member ECF Veteran

    Dec 24, 2013
    the boro, Tennessee
    darn it! now i've found something else i've got to have.. already have a pair of stainless 400 MAH smoktech mini's to put it on. :) thanks
  19. sneakerpimp

    sneakerpimp Ultra Member ECF Veteran

    Oct 12, 2013
    The O.C.
    wait.. lol.. here is yet another..


    IGO-S deck x IGO-F cap
  20. Denvap0r

    Denvap0r Ultra Member Verified Member ECF Veteran

    Feb 10, 2014
    I just use my MVP with a PT on the go and at work. I like the longevity and durability. At home I tend to use my mech mod.

    ...and a Bababooey to you all
Thread Status:
Not open for further replies.

Share This Page