Recent content by rob1522

can someone give me the measurement between the top of the 510 connector and the bottom of the atomizer guide ring. tia

still waiting for my vtr to arrive, could someone give me the measurement between the top of the 510 connector and the bottom of the atomizer protector ring . tia

things certainly have changed from the 901's and screwdrivers i've got, still trying to find out what to buy for ease and plentyfull vapour still a bit in the dark . rob

Hi been away for a couple of years slipped back on the burners.just dug out my old mods, pipes, mini pipes and screwdriver clone to find they all still work. things must have progressed no end since I've been away so can someone tel me the biggest and best thing to hit the ecig market as I'm...

seems like we all keep looking but still no sign of the best mod

Already done one using that pipe have a look to see what you think http://www.e-cigarette-forum.com/forum/modders-forum/6905-my-latest-e-pipe-mod-3.html

yeah is a CR123A battery, like a lot of us on here I get my batteries from deal extreme.

battery number 16340 3.6v or 3.7v I use both

Yes you will see the wires on the iside the negative one connects to a spring in the bottom of the bowl the positive to the top ring and trvels through a 1.5mm hole drilled from the top to the neck. there are 2 pensyles one metal pipe with a manual switch and a cut down screwdriver clone using...

yeah think you got the general idea I used a brass threaded ring that glues into the top of the bowl that a brass cap incorporating the switch screws into. the bowl had to be bored out larger to take the battery and slightly deeper. the neck was then bored to enable the atomizer to fit inside...

Know the feeling madog i even bought another one to keep for a flashlight and given a few to friends for presents

the pipe was from dealextreme DealExtreme: $4.01 Classic Cigarette Smoking Pipe with Pouch then modded to be a e-pipe so the switch was mine and added then

its a e-pipe made from a wooden bowl pipe. the switch is located in the middle of the bowl cap.

the idea is to use the standerd pipe mouthpiece and insert the cartridge into it. sure you could adapt it to fit different types of atomizer but think the penstyle ones would be to fat. using the same battery i did for my screwdriver clones.

103 would be possible but a penstyle atomizer would be too big as it has to be inside the pipe . found the 901 fairly easy to do and topping off is no problem at all you also get the added bonus of never getting any fluid in the mouth due to the longer pipe mouthpiece