Search results

  1. gt_1955

    All Things about the Eleaf iCare & iCare Mini

    For something as small as the ICare (and everything about it is small, the coil heads, the fluid inlets for example), I aim to have the fluid about the same viscosity of PG.
  2. gt_1955

    All Things about the Eleaf iCare & iCare Mini

    Yep :D
  3. gt_1955

    All Things about the Eleaf iCare & iCare Mini

    I'd ensure the liquid you are using wasn't too thick. Secondly, don't over-fill, even if you leave it 1/8" under the max line. Thirdly, when screwing the coil assembly into the now filled tank, hold your finger over the hole in the air tube which will help prevent excess fluid seeping into the...
  4. gt_1955

    All Things about the Eleaf iCare & iCare Mini

    Firstly, it depends on how thick your 70VG30PG fluid is on whether it'll adequately wick or not, but you can always thin it down a bit with vodka or distilled water (upto 10% if necessary). I am using all VG (unflavoured, but 8mg/ml) with 10% vodka at the moment without a problem, although I...
  5. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    The three I like in order are: 1. SXK Shift : excellent flavour, no leaks (ever, unless you store it upside down), good reservoir of fluid, 22ø; 2. SXK No Toy : very good flavour, no leaks (unless you over-squonk), small reservoir of fluid, cuts the o-ring, 18ø; 3. Origen Little or O16 : very...
  6. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    I just thought you were very happy it should be there tomorrow :lol:
  7. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    And to go with my Coppervape (above), my redecorated squeeze with Shift BF atty ;)
  8. gt_1955

    Coppervape BF Mod

    NoToy clone $12.50 SXK BF-99 Styled RDA Rebuildable Dripping Atomizer - stainless steel / 18mm diameter at FastTech - Worldwide Free Shipping or Origen Little clone $9.28 Origen Little Styled RDA Rebuilable Dripping Atomizer - 316 stainless steel / 16mm diameter at FastTech - Worldwide Free...
  9. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    You're not alone ;)
  10. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    You don't necessarily need flavour wicks, but if you do use them the amount of vapour will increase (yes, even wicking with rayon) as there is more coil contact with the fluid infused wick. Once you go over a certain ID coil though (1.6 from memory), you may find this not to be true because the...
  11. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    A b astard file, draw filing ... And that's a type of file BTW
  12. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Removing all the burrs and just generally cleaning up my lathe's 4-jaw chuck ready to machine the Coppervape squonker ;) Well, it is Satdy arvo here :w00t:
  13. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Horizontally challenged? ;)
  14. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    My NoToy (clone) is in Sydney, a couple of more days travelling before I have it in my hot little hands ;)
  15. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    :thumbs: My Pico squeeze and O16
  16. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    I would be reticent about putting low ohm coils on the spinners if they are built like the old eGo batteries ... put too low a coil on them and they make smoke signals and the battery vents. Although, I've never had a spinner to find out ;)
  17. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    The very base coat is etch primer, followed by a grey primer/surfacer (both from the auto industry), then an epoxy enamel (in Sungold) followed by an oil-based clear polyurethane.
  18. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Here is a thread on rayon
  19. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Aw, shucks :blush: 6 double wet coats (so 12 coats), but it is a standard painting technique ;) However, these are truly works of art :thumb:
  20. gt_1955

    Tootle Puffers, Part Three! (The Sequel of the Redux)

    Ha ha ... the mod is a Pico Squeeze that I stripped down and painted, and it has an origen 16 atty on top with a custom outer casing and integrated drip tip ;)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu