Search results

  1. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Gummy, I added the ceramic CAPS in addition to the 100uf aluminum CAPS. So my build has a total of 4ea. I don't know how much it will help in this application. But it is recommended in the TI manual. --- - Sent from my iPhone using Tapatalk
  2. mrengles

    JonboyUSMC's Lava Tanks

    Thanks. --- - Sent from my iPhone using Tapatalk
  3. mrengles

    JonboyUSMC's Lava Tanks

    The punched atty would just flood, right? --- - Sent from my iPhone using Tapatalk
  4. mrengles

    JonboyUSMC's Lava Tanks

    Can we use a punched atty with this tank instead of a carto? Sorry if this is a newb question. I have no experience with tanks. If I can get my hands on one, it will be my first. --- - Sent from my iPhone using Tapatalk
  5. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    I soldered on the ceramic CAPS, I have not noticed any difference in performance. Only time will tell if battery life has changed. Will advise... --- - Sent from my iPhone using Tapatalk
  6. mrengles

    JonboyUSMC's Lava Tanks

    Hello everyone, Just want to follow this thread, I've heard great things about Jonboy's Tanks and want to pick one up on the next round. What size do they come in? Are they all the same ML? TIA -Mrengles --- - Sent from my iPhone using Tapatalk
  7. mrengles

    New to Mods, can you use disposable batteries?

    They do sell lithium batteries at radio shack, CVS and wallgreens at both 3.0 and 3.7 volts. The difference with most of these cell is the current output. You will get the right voltage but low amps. I tried this when I built my first mod while my rechargeable's were in the mail. They would not...
  8. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    I dont do high voltage normally just wanted to push this to its max and see how she performs. At my low of 4.5 volts she vapes GREAT! I like a bit cooler vapes anyhow. Come to think of it... My battery has been going since early this morning. I bet you she's about ready to be swapped out for...
  9. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    The aluminum CAPS are humming at 6.18 volts, with a 2.5 ohm atty (I know thats a little low) and and AW IMR 14500 batt. Im going to add the ceramic CAPS and see if it helps at all. Will advise... I dont know for sure, I believe when the TI Booster gets close to the 12 Watts limit is when it...
  10. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Some how I missed the FREE part of this. I'm all over it.
  11. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Thanks Breaktru, The push button switch I used was a Grayhill rated at 5A with 1,000,000 operations at lower amps (P/N 30-30UL). I do need to upgrade the slide switch though. I have some sample PB coming in from Apem Switches, The specs, and size look right online, but you never know until you...
  12. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Not yet, the ones I bought were too big.... I'm sure its going to burn up quick. Thanks for the kind words breaktru! PS. Breaktru do you know the digikey part number for the right size switch?
  13. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    If this thing was powered by an 18650 it would definitely vape all day long wether it was an 3100Mah or IMR.
  14. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Java, It's all running off an AW IMR 14500 600 Mah. I put the strip of electrical tape for easy removal of the battery. Just so you know the TI booster will cut off at 2.95 volts every time so you don't have to worry about running your batts below the 2.5 mark. Happy vaping! PS. I would love...
  15. mrengles

    Deals N Specials Thread

    Thanks everyone who replied about the Joye 510's. I'll check out the deals. Was looking to trade but I guess buying on the cheap will work. Oops sorry wrong thread. I though this was the Reo swap.... :)
  16. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    PS. Hits like a champ! Getting about 6.5 hours with my vaping habits.
  17. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Built using a 47k RES; without diode or load, she's giving out 4.50-6.18 volts. Here are some more photos. The only areas that have glue are the atty connector, and the on/off slide switch cover. So everything can be moved to a better case if needed. What do you think?
  18. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Good! Use it wisely, it's too expensive at $9.00/ft to just piss it away.
  19. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    You got it! She's a good wife though. Love to dead. Gummy did you get your wire sample?
  20. mrengles

    PTN04050CAD Laser Toner Transfer PCB

    Yeah and modding is the PB switch. If I keep it up vapor/smoke will be coming out of her ears! :)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu