what drip tip are you using? I checked both the drip tip adapters for the v1 and v2 and they both are very sharp, when I put on my vapelab drip tip it ripped one of my o-rings which made me very sad.. I don't know why they don't make the adapter with smooth edges..
That's so weird.. I just recieved a v1 russian 91% from congrevape and even that one had a little problem screwing on that to my WAE, took me 10 minutes, but eventually got it to screw on. The v2 got stuck halfway and I spent 3 hours trying to pry it off with rubber gloves, eventually I got it...
does anyone else have a problem with there 510 connection screw? When I tighten the screw to tighten the positive post so it doesn't move around my 510 connection isn't flush with the bottom base anymore so it doesn't make connection with my mods.. I'm wondering if I got a defective unit if...
Yeah I had a v1 and a v2 and looked at them side by side, I should have taken pics.. but with the v1 you can tell the machining on the tank kit is different I guess because of the lower grade SS. With the v1 it feels like U can see lines going across the satin finish, with the v2 it seems...
I just recieved a Russian 91% v1 and it was a struggle but it barely screwed onto my WAE.. I had some trouble had to rethread and thread it on for ten minutes.. did anyone else have a problem with a russian 91% the v2 didn't even screw on at all, it got stuck and took me a couple hours of brute...
I just watched all your YT videos very helpful even though I don't have a REO, thanks.
How come on the chart it says for a VV device aim for a minimum of 12 wraps and a resistance of 2.0 ohms or higher?
I heard some people claim that thicker wire produces better flavor than thinner gauge...
I've always wrapped my micro coils with 28g kanthal and did around 10wraps on a 16g blunt tip needle which came out to about 1.2 ohms. If I use something with a bigger diameter to wrap my coils in will the vape be warmer or cooler?
Wow.. we both had like pretty much the same issues! I never had the v1 but the v2 wouldn't thread onto my WAE and the insulator seems thinner and cheaper than the KFL+ and the threading, o-rings and the drip tip adapter just don't work right.
The only good thing I liked about the Russian 91%...
I'm vaping at 14W @ 1.2 ohm resistance, i'm not getting that long.. :frown:
Is it okay to use non AW IMR batteries in the WAE since the dna20 is regulated?
Hey guys just wondering if anyone has lint or some dust in the display part of there WAE? Just wondering if thats normal and how does it get in there from removing the top cap portion?
How do you measure how long a battery lasts do you just give an approximate time by vaping casually or is there a timer that measures how long you've been pressing the fire button.
I know that I had a kickback a week ago and I was letting my friends try out my WAE with other mods going...
this is pretty much how i make my coils and rest them along with the diagonal coil setup been following vapdivrr video on yt on how to set up the KFL since the longest :D
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.