Search results

  1. D. Waterhouse

    How do you drill an airflow hole perfectly without a drill press?

    Chuck the bit as deep as it will go, preferably no more than twice the depth of the hole and use masking tape to avoid scratches.
  2. D. Waterhouse

    What Would You Pick out of These 3?!

    Go with the MPV. Both kits are accidents waiting to happen with sub-par chargers and no-name ICR batteries. For batteries and a charger go with Sony VCT5s and an Xtar charger from RTD vapor.
  3. D. Waterhouse

    Igo-W airhole advice

    Chuck the bit as deep as it will go to reduce wandering and cover the hole with masking tape to prevent scratches.
  4. D. Waterhouse

    my kayfun sucks

    If you are using a mech try dropping your resistance down to around 1 ohm if your battery can handle it. At 1.4 ohm you can also use it on a VV/VW and try upping the power.
  5. D. Waterhouse

    am i the only one

    Got a link to it?
  6. D. Waterhouse

    Why is it important to check ohm on coils

    Unless his build has a short, then the video is completely relevant. Test your coils before you fire them Every Time. EDIT: Every new build, not every time you fire it. Safety first but even I think testing before every puff is a bit much. :)
  7. D. Waterhouse

    Kayfun troubleshooting

    What does it meter out to?
  8. D. Waterhouse

    Just ordered igo-f but i have a standard non-adjustable battery..

    Ohm Meters If you're going to be rebuilding this is a good investment I'd also recommend getting a Digital Multi-Meter.
  9. D. Waterhouse

    1st mechanical mod, need training..

    Sony US18650VTC5 2600mAh 30amp Peace of mind.
  10. D. Waterhouse

    Kayfun Models vs. Russian 91% models.. (Airflow)?

    In a side by side test performed at 8:08 AM CST my Kayfun 3.1 clone with the airflow wide open has a slightly tighter draw than an Igo S with a 1/16" airhole, totally lung hit capable.
  11. D. Waterhouse

    Where can I get some really cool drip tips?

    Vaperev Nice selection here.
  12. D. Waterhouse

    to mech or not!!??!!??!?!?

    That's the trick, you don't have to go super sub-ohm. I have a dripper with a .8ohm coil that's going on 8 months with the same coil that I use with my darkest, most coil gunking liquids. Once a week or so I pull the cap off, pull the cotton wick out, dry burn the coil, and rewick. It takes 2-3...
  13. D. Waterhouse

    Djarum Black clove liquid ???

    Kretek from Tasty Vapor was dead on when I tried it 3 years ago.
  14. D. Waterhouse

    Explain Hybrid Connector

    If your topcap has heavy drop it should help but it is subject to the law of diminishing returns. The lower your drop, the harder it will be to drop it more.
  15. D. Waterhouse

    Veteran vapers that still use stick batteries and cartos

    Stick batteries? NO. I won't touch any ICR batteries. Cartos? Oh yea! 5 days a week at work.
  16. D. Waterhouse

    Explain Hybrid Connector

    For what? Add links if possible.
  17. D. Waterhouse

    Drip

    Dripper RDA It's a little small but good practice if you upgrade to a kayfun type tank.
  18. D. Waterhouse

    Question about a coil build

    Just add wraps until it meters out to one ohm.
  19. D. Waterhouse

    better than needle tip bottles

    30ml Luer Lock Bottle with a 14g Stainless Steel Luer Lock Needle It fills FAST!
  20. D. Waterhouse

    Newbie Question about Mini Coil/Wick/Clearomizer

    I'll grab some polyfil and a stir straw for my carts and be over in a bit.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu